main
Ray Publish 0.1.0 9f517de
{
  "slug": "lmh6521sqe",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Special Purpose Amplifiers, WQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "operational amplifier-comparator",
    "lmh6521sqe",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lmh6521sqe.kicad_sym",
    "lmh6521sqe.kicad_mod",
    "lmh6521sqe.glb",
    "lmh6521sqe.step",
    "lmh6521sqe.lbr",
    "docs/hero.png",
    "docs/lmh6521sqe-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lmh6521sqe-hero.glb",
    "lmh6521sqe-hero.overlay.json",
    "lmh6521sqe-etched.glb"
  ],
  "component": {
    "mpn": "LMH6521SQE",
    "manufacturer": "Texas Instruments",
    "package": "WQFN-32-EP(5x5)",
    "pin_count": 33,
    "category": "Operational Amplifier/Comparator",
    "subcategory": "Special Purpose Amplifiers",
    "datasheet": "https://www.ti.com/lit/ds/symlink/lmh6521.pdf",
    "parts": {
      "symbol": "lmh6521sqe.kicad_sym",
      "footprint": "lmh6521sqe.kicad_mod",
      "model_3d": "lmh6521sqe-hero.glb",
      "model_3d_plain": "lmh6521sqe-etched.glb",
      "model_3d_step": "lmh6521sqe-etched.step",
      "model_3d_step_plain": "lmh6521sqe.step",
      "lbr": "lmh6521sqe.lbr"
    },
    "distributor_links": {
      "lcsc": "C701923",
      "digikey": "296-35191-2-ND",
      "mouser": "926-LMH6521SQE/NOPB"
    },
    "distributor_check": {
      "checked_at": "2026-11-11T04:28:51Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-35191-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "926-LMH6521SQE/NOPB",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "A3/SDI/DNA",
        "type": "input",
        "description": "Channel A attenuation bit three (4-dB step) in parallel mode, serial data in in SPI mode, or down pulse (logic 0 pulse decreases gain one step) in pulse mode; pulsing with pin 2 resets gain to maximum."
      },
      {
        "number": "2",
        "name": "A4/CLK/UPA",
        "type": "input",
        "description": "Channel A attenuation bit four (8-dB step) in parallel mode, serial clock in SPI mode, or up pulse (logic 0 pulse increases gain one step) in pulse mode; pulsing with pin 1 resets gain to maximum."
      },
      {
        "number": "3",
        "name": "A5",
        "type": "input",
        "description": "Attenuation bit five (16-dB step) in parallel mode; unused in serial and pulse modes, where it is connected to DC ground."
      },
      {
        "number": "4",
        "name": "MOD0",
        "type": "input",
        "description": "Digital mode control pin that floats to logic high if left unconnected; unused in serial mode, connect to DC ground."
      },
      {
        "number": "5",
        "name": "MOD1",
        "type": "input",
        "description": "Digital mode control pin that floats to logic high if left unconnected; unused in pulse mode, connect to DC ground."
      },
      {
        "number": "6",
        "name": "B5",
        "type": "input",
        "description": "Attenuation bit five (16-dB step) in parallel mode; unused in serial and pulse modes, connect to DC ground."
      },
      {
        "number": "7",
        "name": "B4/UPB",
        "type": "input",
        "description": "Channel B attenuation bit four (8-dB step) in parallel mode or up pulse (logic 0 pulse increases gain one step) in pulse mode; pulsing with pin 8 resets gain to maximum, unused in serial mode (connect to DC ground)."
      },
      {
        "number": "8",
        "name": "B3/DNB",
        "type": "input",
        "description": "Channel B attenuation bit three (4-dB step) in parallel mode or down pulse (logic 0 pulse decreases gain one step) in pulse mode; pulsing with pin 7 resets gain to maximum, unused in serial mode (connect to DC ground)."
      },
      {
        "number": "9",
        "name": "B2/S1B",
        "type": "input",
        "description": "Channel B attenuation bit two (2-dB step) in parallel mode or step size bit 1 in pulse mode ((0,0) = 0.5 dB; (0,1) = 1 dB; (1,0) = 2 dB; (1,1) = 6 dB); unused in serial mode, connect to DC ground."
      },
      {
        "number": "10",
        "name": "B1/S0B",
        "type": "input",
        "description": "Channel B attenuation bit one (1-dB step) in parallel mode or step size bit 0 in pulse mode ((0,0) = 0.5 dB; (0,1) = 1 dB; (1,0) = 2 dB; (1,1) = 6 dB); unused in serial mode, connect to DC ground."
      },
      {
        "number": "11",
        "name": "INB+",
        "type": "input",
        "description": "Channel B amplifier noninverting input, internally biased to mid supply; input voltage must not exceed V+ or go below GND by more than 0.5 V."
      },
      {
        "number": "12",
        "name": "INB-",
        "type": "input",
        "description": "Channel B amplifier inverting input, internally biased to mid supply; input voltage must not exceed V+ or go below GND by more than 0.5 V."
      },
      {
        "number": "13",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin to connect to a low impedance ground plane; all pin voltages are specified with respect to these pins and the exposed pad is internally bonded to them."
      },
      {
        "number": "14",
        "name": "+5V",
        "type": "power_in",
        "description": "Power supply pin with a valid supply range of 4.75 V to 5.25 V."
      },
      {
        "number": "15",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin to connect to a low impedance ground plane; all pin voltages are specified with respect to these pins and the exposed pad is internally bonded to them."
      },
      {
        "number": "16",
        "name": "B0",
        "type": "input",
        "description": "Channel B attenuation bit zero (0.5-dB step, 000000 = maximum gain) in parallel mode; unused in serial and pulse modes, connect to DC ground."
      },
      {
        "number": "17",
        "name": "OUTB+",
        "type": "output",
        "description": "Channel B amplifier noninverting output, externally biased to 0 V."
      },
      {
        "number": "18",
        "name": "OUTB-",
        "type": "output",
        "description": "Channel B amplifier inverting output, externally biased to 0 V."
      },
      {
        "number": "19",
        "name": "ENB",
        "type": "input",
        "description": "Channel B enable pin, logic 1 = enabled state (floats high if unconnected)."
      },
      {
        "number": "20",
        "name": "LATB",
        "type": "input",
        "description": "Channel B latch pin (logic 0 = active, logic 1 = latched, gain does not change once high) used in parallel mode; connect to ground if latch is not desired or in serial mode."
      },
      {
        "number": "21",
        "name": "LATA",
        "type": "input",
        "description": "Channel A latch pin (logic 0 = active, logic 1 = latched, gain does not change once high) used in parallel mode; connect to ground if latch is not desired or in serial mode."
      },
      {
        "number": "22",
        "name": "ENA",
        "type": "input",
        "description": "Channel A enable pin, logic 1 = enabled state (floats high if unconnected)."
      },
      {
        "number": "23",
        "name": "OUTA-",
        "type": "output",
        "description": "Channel A amplifier inverting output, externally biased to 0 V."
      },
      {
        "number": "24",
        "name": "OUTA+",
        "type": "output",
        "description": "Channel A amplifier noninverting output, externally biased to 0 V."
      },
      {
        "number": "25",
        "name": "A0",
        "type": "input",
        "description": "Channel A attenuation bit zero (0.5-dB step, 000000 = maximum gain) in parallel mode; unused in serial and pulse modes, connect to DC ground."
      },
      {
        "number": "26",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin to connect to a low impedance ground plane; all pin voltages are specified with respect to these pins and the exposed pad is internally bonded to them."
      },
      {
        "number": "27",
        "name": "+5V",
        "type": "power_in",
        "description": "Power supply pin with a valid supply range of 4.75 V to 5.25 V."
      },
      {
        "number": "28",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin to connect to a low impedance ground plane; all pin voltages are specified with respect to these pins and the exposed pad is internally bonded to them."
      },
      {
        "number": "29",
        "name": "INA-",
        "type": "input",
        "description": "Channel A amplifier inverting input, internally biased to mid supply; input voltage must not exceed V+ or go below GND by more than 0.5 V."
      },
      {
        "number": "30",
        "name": "INA+",
        "type": "input",
        "description": "Channel A amplifier noninverting input, internally biased to mid supply; input voltage must not exceed V+ or go below GND by more than 0.5 V."
      },
      {
        "number": "31",
        "name": "A1/SDO/S0A",
        "type": "bidirectional",
        "description": "Channel A attenuation bit one (1-dB step) in parallel mode, serial data out (SPI, tri-stated unless chip select asserted) in serial mode, or step size bit 0 in pulse mode ((0,0) = 0.5 dB; (0,1) = 1 dB; (1,0) = 2 dB; (1,1) = 6 dB)."
      },
      {
        "number": "32",
        "name": "A2/CS/S1A",
        "type": "input",
        "description": "Channel A attenuation bit two (2-dB step) in parallel mode, active-low serial chip select in SPI mode, or step size bit 1 in pulse mode ((0,0) = 0.5 dB; (0,1) = 1 dB; (1,0) = 2 dB; (1,1) = 6 dB)."
      },
      {
        "number": "33",
        "name": "GND",
        "type": "power_in",
        "description": "Exposed thermal pad, connect to a low impedance ground plane; it is internally bonded to the ground pins and must be soldered to the PCB for thermal performance."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Package match: the orderable addendum (page 31) lists LMH6521SQE/NOPB as WQFN (RTV), 32 pins, 250-un; The exposed thermal pad is listed as GND on the datasheet but has no pin number, so it is not includ; The datasheet classifies every pin as I (input). SDO on pin 31 is an open-collector output in serial",
          "exposed pad 33 added from the footprint"
        ],
        "pages_sent": 38,
        "cost_usd": 0.0427,
        "at": "2026-11-11T04:28:38"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/lmh6521.pdf",
        "pages": 38,
        "sha256": "40eceba984bf50bf",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "model_3d_generated": {
        "generator": "factory/gen_pkg3d.py",
        "family": "QFN",
        "height_mm": 0.75,
        "height_basis": "datasheet A, midpoint of min and max",
        "standoff_mm": 0.0
      },
      "pins": {
        "total": 33,
        "described": 33,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lmh6521sqe.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.02,
          5.02,
          0.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a0c24ac9fd5a692b619122db8b616bf77b23758e22751ad9098085c1d601b07f",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lmh6521sqe-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.02,
          5.02,
          0.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "04fb387a25612188db380a5804d06c0380f8837b68a48d7d02144de4ea22b80e",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "RTV0032A",
      "source_page": 35,
      "D": {
        "nom_mm": 5.0,
        "range_mm": [
          4.85,
          5.15
        ]
      },
      "E1": {
        "nom_mm": 5.0,
        "range_mm": [
          4.85,
          5.15
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 0.75,
        "range_mm": [
          0.7,
          0.8
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "lmh6521sqe.step",
        "verdict": "PASS",
        "reasons": [
          "height within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}