main
Ray
Publish 0.1.0
9f517de
LMH6521SQE
Texas Instruments · Special Purpose Amplifiers · WQFN-32-EP(5x5)
LMH6521SQE from Texas Instruments, in a WQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A3/SDI/DNA | input | Channel A attenuation bit three (4-dB step) in parallel mode, serial data in in SPI mode, or down pulse (logic 0 pulse decreases gain one step) in pulse mode; pulsing with pin 2 resets gain to maximum. |
| 2 | A4/CLK/UPA | input | Channel A attenuation bit four (8-dB step) in parallel mode, serial clock in SPI mode, or up pulse (logic 0 pulse increases gain one step) in pulse mode; pulsing with pin 1 resets gain to maximum. |
| 3 | A5 | input | Attenuation bit five (16-dB step) in parallel mode; unused in serial and pulse modes, where it is connected to DC ground. |
| 4 | MOD0 | input | Digital mode control pin that floats to logic high if left unconnected; unused in serial mode, connect to DC ground. |
| 5 | MOD1 | input | Digital mode control pin that floats to logic high if left unconnected; unused in pulse mode, connect to DC ground. |
| 6 | B5 | input | Attenuation bit five (16-dB step) in parallel mode; unused in serial and pulse modes, connect to DC ground. |
| 7 | B4/UPB | input | Channel B attenuation bit four (8-dB step) in parallel mode or up pulse (logic 0 pulse increases gain one step) in pulse mode; pulsing with pin 8 resets gain to maximum, unused in serial mode (connect to DC ground). |
| 8 | B3/DNB | input | Channel B attenuation bit three (4-dB step) in parallel mode or down pulse (logic 0 pulse decreases gain one step) in pulse mode; pulsing with pin 7 resets gain to maximum, unused in serial mode (connect to DC ground). |
| 9 | B2/S1B | input | Channel B attenuation bit two (2-dB step) in parallel mode or step size bit 1 in pulse mode ((0,0) = 0.5 dB; (0,1) = 1 dB; (1,0) = 2 dB; (1,1) = 6 dB); unused in serial mode, connect to DC ground. |
| 10 | B1/S0B | input | Channel B attenuation bit one (1-dB step) in parallel mode or step size bit 0 in pulse mode ((0,0) = 0.5 dB; (0,1) = 1 dB; (1,0) = 2 dB; (1,1) = 6 dB); unused in serial mode, connect to DC ground. |
| 11 | INB+ | input | Channel B amplifier noninverting input, internally biased to mid supply; input voltage must not exceed V+ or go below GND by more than 0.5 V. |
| 12 | INB- | input | Channel B amplifier inverting input, internally biased to mid supply; input voltage must not exceed V+ or go below GND by more than 0.5 V. |
| 13 | GND | power_in | Ground pin to connect to a low impedance ground plane; all pin voltages are specified with respect to these pins and the exposed pad is internally bonded to them. |
| 14 | +5V | power_in | Power supply pin with a valid supply range of 4.75 V to 5.25 V. |
| 15 | GND | power_in | Ground pin to connect to a low impedance ground plane; all pin voltages are specified with respect to these pins and the exposed pad is internally bonded to them. |
| 16 | B0 | input | Channel B attenuation bit zero (0.5-dB step, 000000 = maximum gain) in parallel mode; unused in serial and pulse modes, connect to DC ground. |
| 17 | OUTB+ | output | Channel B amplifier noninverting output, externally biased to 0 V. |
| 18 | OUTB- | output | Channel B amplifier inverting output, externally biased to 0 V. |
| 19 | ENB | input | Channel B enable pin, logic 1 = enabled state (floats high if unconnected). |
| 20 | LATB | input | Channel B latch pin (logic 0 = active, logic 1 = latched, gain does not change once high) used in parallel mode; connect to ground if latch is not desired or in serial mode. |
| 21 | LATA | input | Channel A latch pin (logic 0 = active, logic 1 = latched, gain does not change once high) used in parallel mode; connect to ground if latch is not desired or in serial mode. |
| 22 | ENA | input | Channel A enable pin, logic 1 = enabled state (floats high if unconnected). |
| 23 | OUTA- | output | Channel A amplifier inverting output, externally biased to 0 V. |
| 24 | OUTA+ | output | Channel A amplifier noninverting output, externally biased to 0 V. |
| 25 | A0 | input | Channel A attenuation bit zero (0.5-dB step, 000000 = maximum gain) in parallel mode; unused in serial and pulse modes, connect to DC ground. |
| 26 | GND | power_in | Ground pin to connect to a low impedance ground plane; all pin voltages are specified with respect to these pins and the exposed pad is internally bonded to them. |
| 27 | +5V | power_in | Power supply pin with a valid supply range of 4.75 V to 5.25 V. |
| 28 | GND | power_in | Ground pin to connect to a low impedance ground plane; all pin voltages are specified with respect to these pins and the exposed pad is internally bonded to them. |
| 29 | INA- | input | Channel A amplifier inverting input, internally biased to mid supply; input voltage must not exceed V+ or go below GND by more than 0.5 V. |
| 30 | INA+ | input | Channel A amplifier noninverting input, internally biased to mid supply; input voltage must not exceed V+ or go below GND by more than 0.5 V. |
| 31 | A1/SDO/S0A | bidirectional | Channel A attenuation bit one (1-dB step) in parallel mode, serial data out (SPI, tri-stated unless chip select asserted) in serial mode, or step size bit 0 in pulse mode ((0,0) = 0.5 dB; (0,1) = 1 dB; (1,0) = 2 dB; (1,1) = 6 dB). |
| 32 | A2/CS/S1A | input | Channel A attenuation bit two (2-dB step) in parallel mode, active-low serial chip select in SPI mode, or step size bit 1 in pulse mode ((0,0) = 0.5 dB; (0,1) = 1 dB; (1,0) = 2 dB; (1,1) = 6 dB). |
| 33 | GND | power_in | Exposed thermal pad, connect to a low impedance ground plane; it is internally bonded to the ground pins and must be soldered to the PCB for thermal performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-32-EP(5x5) |
| Category | Operational Amplifier/Comparator |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Positive supply voltage (pin 14 and 27) | -0.6 | 5.5 | V | 6 | |||
| Differential voltage between any two grounds | 200 | mV | printed as < 200 mV | 6 | |||
| Analog input voltage | -0.6 | V | upper limit printed as V+ | 6 | |||
| Digital input voltage | -0.6 | 5.5 | V | 6 | |||
| Soldering temperature, infrared or convection | 260 | °C | 30 s | 6 | |||
| Junction temperature | TJ | 150 | °C | 6 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 6 | ||
| Supply voltage (pin 14 and 27) | 4.75 | 5.25 | V | 6 | |||
| Differential voltage between any two grounds | 10 | mV | printed as < 10 mV | 6 | |||
| Analog input voltage, AC coupled | 0 | V | AC coupled; upper limit printed as V+ | 6 | |||
| TA Ambient temperature | TA | -40 | 85 | °C | 6 | ||
| VCC Supply voltage | VCC | 4.75 | 5 | 5.25 | V | 8 | |
| Input common mode voltage range | 2 | 3 | V | Externally driven (DC coupled) | 7 | ||
| Channel gain matching | -0.04 | 0.04 | dB | ChA, ChB, any gain setting | 7 | ||
| Channel phase matching | -0.45 | 0.45 | ° | ChA, ChB, any gain setting | 7 | ||
| Cumulative gain error | -0.1 | 0.1 | dB | 0 to 12 dB attenuation setting | 7 | ||
| Cumulative gain error | -0.3 | 0.3 | dB | 0 to 24 dB attenuation setting | 7 | ||
| Cumulative gain error | -0.5 | 0.5 | dB | 0 to 31 dB attenuation setting | 7 | ||
| Cumulative phase shift | -0.6 | 0.6 | ° | 0 to 12 dB attenuation setting | 7 | ||
| Cumulative phase shift | -5.3 | 5.3 | ° | 0 to 24 dB attenuation setting | 7 | ||
| Cumulative phase shift | -16.5 | 16.5 | ° | 0 to 31 dB attenuation setting | 7 | ||
| Junction-to-ambient thermal resistance | RθJA | 45 | °C/W | 6 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 23.7 | °C/W | 6 | |||
| Junction-to-board thermal resistance | RθJB | 9.1 | °C/W | 6 | |||
| Junction-to-top characterization parameter | ψJT | 0.3 | °C/W | 6 | |||
| Junction-to-board characterization parameter | ψJB | 9.1 | °C/W | 6 | |||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 3.6 | °C/W | 6 |
CAD (KiCad official)
- Symbol:
LMH6521SQE - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: WQFN-32-EP(5x5), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lmh6521sqe-etched.step/lmh6521sqe-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmh6521sqe.step/lmh6521sqe.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
40eceba984bf50bf, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LMH6521SQE
**Texas Instruments** · Special Purpose Amplifiers · WQFN-32-EP(5x5)
LMH6521SQE from Texas Instruments, in a WQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A3/SDI/DNA | input | Channel A attenuation bit three (4-dB step) in parallel mode, serial data in in SPI mode, or down pulse (logic 0 pulse decreases gain one step) in pulse mode; pulsing with pin 2 resets gain to maximum. |
| 2 | A4/CLK/UPA | input | Channel A attenuation bit four (8-dB step) in parallel mode, serial clock in SPI mode, or up pulse (logic 0 pulse increases gain one step) in pulse mode; pulsing with pin 1 resets gain to maximum. |
| 3 | A5 | input | Attenuation bit five (16-dB step) in parallel mode; unused in serial and pulse modes, where it is connected to DC ground. |
| 4 | MOD0 | input | Digital mode control pin that floats to logic high if left unconnected; unused in serial mode, connect to DC ground. |
| 5 | MOD1 | input | Digital mode control pin that floats to logic high if left unconnected; unused in pulse mode, connect to DC ground. |
| 6 | B5 | input | Attenuation bit five (16-dB step) in parallel mode; unused in serial and pulse modes, connect to DC ground. |
| 7 | B4/UPB | input | Channel B attenuation bit four (8-dB step) in parallel mode or up pulse (logic 0 pulse increases gain one step) in pulse mode; pulsing with pin 8 resets gain to maximum, unused in serial mode (connect to DC ground). |
| 8 | B3/DNB | input | Channel B attenuation bit three (4-dB step) in parallel mode or down pulse (logic 0 pulse decreases gain one step) in pulse mode; pulsing with pin 7 resets gain to maximum, unused in serial mode (connect to DC ground). |
| 9 | B2/S1B | input | Channel B attenuation bit two (2-dB step) in parallel mode or step size bit 1 in pulse mode ((0,0) = 0.5 dB; (0,1) = 1 dB; (1,0) = 2 dB; (1,1) = 6 dB); unused in serial mode, connect to DC ground. |
| 10 | B1/S0B | input | Channel B attenuation bit one (1-dB step) in parallel mode or step size bit 0 in pulse mode ((0,0) = 0.5 dB; (0,1) = 1 dB; (1,0) = 2 dB; (1,1) = 6 dB); unused in serial mode, connect to DC ground. |
| 11 | INB+ | input | Channel B amplifier noninverting input, internally biased to mid supply; input voltage must not exceed V+ or go below GND by more than 0.5 V. |
| 12 | INB- | input | Channel B amplifier inverting input, internally biased to mid supply; input voltage must not exceed V+ or go below GND by more than 0.5 V. |
| 13 | GND | power_in | Ground pin to connect to a low impedance ground plane; all pin voltages are specified with respect to these pins and the exposed pad is internally bonded to them. |
| 14 | +5V | power_in | Power supply pin with a valid supply range of 4.75 V to 5.25 V. |
| 15 | GND | power_in | Ground pin to connect to a low impedance ground plane; all pin voltages are specified with respect to these pins and the exposed pad is internally bonded to them. |
| 16 | B0 | input | Channel B attenuation bit zero (0.5-dB step, 000000 = maximum gain) in parallel mode; unused in serial and pulse modes, connect to DC ground. |
| 17 | OUTB+ | output | Channel B amplifier noninverting output, externally biased to 0 V. |
| 18 | OUTB- | output | Channel B amplifier inverting output, externally biased to 0 V. |
| 19 | ENB | input | Channel B enable pin, logic 1 = enabled state (floats high if unconnected). |
| 20 | LATB | input | Channel B latch pin (logic 0 = active, logic 1 = latched, gain does not change once high) used in parallel mode; connect to ground if latch is not desired or in serial mode. |
| 21 | LATA | input | Channel A latch pin (logic 0 = active, logic 1 = latched, gain does not change once high) used in parallel mode; connect to ground if latch is not desired or in serial mode. |
| 22 | ENA | input | Channel A enable pin, logic 1 = enabled state (floats high if unconnected). |
| 23 | OUTA- | output | Channel A amplifier inverting output, externally biased to 0 V. |
| 24 | OUTA+ | output | Channel A amplifier noninverting output, externally biased to 0 V. |
| 25 | A0 | input | Channel A attenuation bit zero (0.5-dB step, 000000 = maximum gain) in parallel mode; unused in serial and pulse modes, connect to DC ground. |
| 26 | GND | power_in | Ground pin to connect to a low impedance ground plane; all pin voltages are specified with respect to these pins and the exposed pad is internally bonded to them. |
| 27 | +5V | power_in | Power supply pin with a valid supply range of 4.75 V to 5.25 V. |
| 28 | GND | power_in | Ground pin to connect to a low impedance ground plane; all pin voltages are specified with respect to these pins and the exposed pad is internally bonded to them. |
| 29 | INA- | input | Channel A amplifier inverting input, internally biased to mid supply; input voltage must not exceed V+ or go below GND by more than 0.5 V. |
| 30 | INA+ | input | Channel A amplifier noninverting input, internally biased to mid supply; input voltage must not exceed V+ or go below GND by more than 0.5 V. |
| 31 | A1/SDO/S0A | bidirectional | Channel A attenuation bit one (1-dB step) in parallel mode, serial data out (SPI, tri-stated unless chip select asserted) in serial mode, or step size bit 0 in pulse mode ((0,0) = 0.5 dB; (0,1) = 1 dB; (1,0) = 2 dB; (1,1) = 6 dB). |
| 32 | A2/CS/S1A | input | Channel A attenuation bit two (2-dB step) in parallel mode, active-low serial chip select in SPI mode, or step size bit 1 in pulse mode ((0,0) = 0.5 dB; (0,1) = 1 dB; (1,0) = 2 dB; (1,1) = 6 dB). |
| 33 | GND | power_in | Exposed thermal pad, connect to a low impedance ground plane; it is internally bonded to the ground pins and must be soldered to the PCB for thermal performance. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-32-EP(5x5) |
| Category | Operational Amplifier/Comparator |
| Pins | 33 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Positive supply voltage (pin 14 and 27) | | -0.6 | | 5.5 | V | | 6 |
| Differential voltage between any two grounds | | | | 200 | mV | printed as < 200 mV | 6 |
| Analog input voltage | | -0.6 | | | V | upper limit printed as V+ | 6 |
| Digital input voltage | | -0.6 | | 5.5 | V | | 6 |
| Soldering temperature, infrared or convection | | | | 260 | °C | 30 s | 6 |
| Junction temperature | TJ | | | 150 | °C | | 6 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 6 |
| Supply voltage (pin 14 and 27) | | 4.75 | | 5.25 | V | | 6 |
| Differential voltage between any two grounds | | | | 10 | mV | printed as < 10 mV | 6 |
| Analog input voltage, AC coupled | | 0 | | | V | AC coupled; upper limit printed as V+ | 6 |
| TA Ambient temperature | TA | -40 | | 85 | °C | | 6 |
| VCC Supply voltage | VCC | 4.75 | 5 | 5.25 | V | | 8 |
| Input common mode voltage range | | 2 | | 3 | V | Externally driven (DC coupled) | 7 |
| Channel gain matching | | -0.04 | | 0.04 | dB | ChA, ChB, any gain setting | 7 |
| Channel phase matching | | -0.45 | | 0.45 | ° | ChA, ChB, any gain setting | 7 |
| Cumulative gain error | | -0.1 | | 0.1 | dB | 0 to 12 dB attenuation setting | 7 |
| Cumulative gain error | | -0.3 | | 0.3 | dB | 0 to 24 dB attenuation setting | 7 |
| Cumulative gain error | | -0.5 | | 0.5 | dB | 0 to 31 dB attenuation setting | 7 |
| Cumulative phase shift | | -0.6 | | 0.6 | ° | 0 to 12 dB attenuation setting | 7 |
| Cumulative phase shift | | -5.3 | | 5.3 | ° | 0 to 24 dB attenuation setting | 7 |
| Cumulative phase shift | | -16.5 | | 16.5 | ° | 0 to 31 dB attenuation setting | 7 |
| Junction-to-ambient thermal resistance | RθJA | | 45 | | °C/W | | 6 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 23.7 | | °C/W | | 6 |
| Junction-to-board thermal resistance | RθJB | | 9.1 | | °C/W | | 6 |
| Junction-to-top characterization parameter | ψJT | | 0.3 | | °C/W | | 6 |
| Junction-to-board characterization parameter | ψJB | | 9.1 | | °C/W | | 6 |
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | | 3.6 | | °C/W | | 6 |
## CAD (KiCad official)
- Symbol: `LMH6521SQE`
- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`
- 3D model: WQFN-32-EP(5x5), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `lmh6521sqe-etched.step` / `lmh6521sqe-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lmh6521sqe.step` / `lmh6521sqe.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lmh6521.pdf) (38 pp, sha256 `40eceba984bf50bf`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lmh6521sqe-datasheet.pdf)