main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lm74930qrgerq1: viewers · Ray
lm74930qrgerq1-etched.glb lm74930qrgerq1: factory component page (tier=mfr) · Ray
lm74930qrgerq1-etched.step lm74930qrgerq1: factory component page (tier=mfr) · Ray
lm74930qrgerq1-hero.glb lm74930qrgerq1: hero GLB from the etched model (keeps the MPN mark) · Ray
lm74930qrgerq1-hero.overlay.json lm74930qrgerq1: hero GLB from the etched model (keeps the MPN mark) · Ray
lm74930qrgerq1.glb Publish 0.1.0 · Ray
lm74930qrgerq1.kicad_mod Publish 0.1.0 · Ray
lm74930qrgerq1.kicad_sym Publish 0.1.0 · Ray
lm74930qrgerq1.lbr Publish 0.1.0 · Ray
lm74930qrgerq1.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 25 pins · Ray

LM74930QRGERQ1

Texas Instruments · Power Distribution Switches · VQFN-24-EP(4x4)

LM74930QRGERQ1 from Texas Instruments, in a VQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DGATE output Diode controller gate drive output that connects to the gate of the external ideal diode MOSFET.
2 A input Anode of the ideal diode that connects to the source of the external ideal diode MOSFET.
3 SW input Voltage sensing disconnect switch terminal used as the top of the resistor ladder for the common source node, and the switch is OFF when EN is low.
4 UVLO input Adjustable undervoltage threshold input that is pulled HGATE low when the voltage falls below the undervoltage cut-off, and should be tied to VS or EN when unused.
5 OV input Adjustable overvoltage threshold input that pulls HGATE low when the sensed voltage exceeds the overvoltage cut-off, and should be tied to ground when unused.
6 EN input Enable input that is connected to VS for always-on operation and enters low Iq shutdown when pulled below V(ENF).
7 MODE input MODE input that disables the reverse current blocking function of DGATE when pulled low, and can be tied to EN or VS when unused.
8 N.C unconnected No connection pin that must be kept floating.
9 TMR passive Fault timer input where a capacitor to GND sets the fault warning, fault turn-off and retry periods, and connecting it to GND disables overcurrent protection.
10 IMON output Analog current monitor output that sources a scaled-down ratio of the current through RSENSE, converted to voltage by a resistor to GND.
11 ILIM passive Overcurrent detection setting pin where a resistor to GND sets the overcurrent comparator threshold, and connecting to GND disables overcurrent protection.
12 FLT output Open-drain fault output that is pulled low during undervoltage, overvoltage, overcurrent and short circuit events.
13 GND power_in Ground pin that connects to the system ground plane.
14 HGATE output GATE driver output for the HSFET that connects to the gate of the external load switch MOSFET.
15 OUT input Connects to the common source rail, which is the source of the external load switch MOSFET.
16 OVCLAMP input Overvoltage clamp input with circuit breaker (timer) functionality that connects to the OV pin, and is tied to ground when unused.
17 N.C unconnected No connection pin that must be kept floating.
18 ISCP input Short-circuit detection threshold setting pin, where connecting it to C sets an internal fixed 20 mV threshold for output short circuit detection.
19 CS- input Current sense negative input.
20 CS+ input Current sense positive input that connects through a 50-Ω resistor to the external current sense resistor.
21 N.C unconnected No connection pin that must be kept floating.
22 VS power_in Input power supply to the IC that requires a 100-nF capacitor across VS and GND.
23 CAP output Internal charge pump output that requires a 100-nF capacitor across CAP and VS.
24 C input Cathode of the ideal diode that connects to the drain of the external ideal diode MOSFET.
25 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-24-EP(4x4)
Category Power Management (PMIC)
Pins 25

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input pins: A to GND -65 70 V 5
C, VS, CS+, CS-, ISCP to GND -1 70 V 5
SW, EN, MODE, UVLO, OV, OVCLAMP to GND -0.3 70 V V(A) > 0 V 5
RTN to GND -65 0.3 V 5
ISW, IFLT -1 10 mA 5
TMR, ILIM -0.3 5.5 V 5
ISCP, CS+ to CS- -0.3 0.3 V 5
OUT to VS -65 16.5 V 5
CAP to VS -0.3 15 V 5
CAP to A, OUT -0.3 85 V 5
DGATE to A -0.3 15 V 5
FLT to GND -1 70 V 5
IMON -0.3 5.5 5
HGATE to OUT -0.3 15 V 5
Output to input pins C to A -5 85 V 5
Operating junction temperature Tj -40 150 °C 5
Storage temperature Tstg -40 150 °C 5
Input pins: A to GND (recommended) -60 65 V 5
VS, SW, CS+, CS-, ISCP to GND 0 65 V 5
EN, UVLO, OV, MODE to GND 0 65 V 5
External capacitance CAP to VS, VS to GND 0.1 µF 5
External MOSFET max VGS rating DGATE to A and HGATE to OUT 15 V 6
Operating junction temperature (recommended) Tj -40 150 °C 6
Junction-to-ambient thermal resistance RθJA 44 °C/W RGE (VQFN) 24 pins 6
Junction-to-case (top) thermal resistance RθJC(top) 38.3 °C/W RGE (VQFN) 24 pins 6
Junction-to-board thermal resistance RθJB 21.3 °C/W RGE (VQFN) 24 pins 6
Junction-to-case (bottom) thermal resistance RθJC(bot) 5.9 °C/W RGE (VQFN) 24 pins 6
Operating input voltage V(VS) 4 65 V 6
VS POR threshold, rising V(VS_PORR) 2.4 2.6 2.9 V 6
VS POR threshold, falling V(VS_PORF) 2.2 2.1 2.7 V 6
Shutdown current, I(GND) I(SHDN) 2.5 5 µA V(EN) = 0 V 6
Total system quiescent current, I(GND) I(Q) 665 780 µA V(EN) = 2 V 6
I(A) leakage current during reverse polarity I(REV) -100 -35 µA 0 V ≤ V(A) ≤, 65 V 6
Enable threshold voltage for low Iq shutdown, rising V(ENR) 0.8 1.05 V 6
Enable falling threshold voltage for low Iq shutdown V(ENF) 0.41 0.7 V 6
Enable input current I(EN/UVLO) 55 200 nA 0 V ≤ V(EN) ≤ 65 V 6
UVLO threshold voltage, rising V(UVLOR) 0.585 0.6 0.63 V 6
UVLO threshold voltage, falling V(UVLOF) 0.533 0.55 0.573 V 7
Battery sensing disconnect switch resistance R(SW) 10 19.5 46 Ω 7
Overvoltage threshold input, rising V(OVR) 0.585 0.6 0.63 V 7
Overvoltage threshold input, falling V(OVF) 0.533 0.55 0.573 V 7
OVCLAMP threshold input, rising V(OVCLAMPR) 0.57 0.59 0.61 V 7
Input referred offset V(OFFSET) -2.1 2.1 mV RSET = 50Ω RIMON = 5 kΩ (corresponds to VSNS = 6 mV to 30 mV) 7
OCP comparator rising threshold V(SNS_TH) 1.08 1.22 1.32 V 7
OCP comparator falling threshold V(SNS_TH) 1.02 1.15 1.25 V 7
ISCP SCP input bias current 9.5 11 12 µA 7
HV SCP comparator threshold V(HV_SCP) 17.4 20 22 mV VCS- > 3V 7
Current monitor output accuracy -12.5 12.5 % VSENSE = 20 mV, RIMON = 5kΩ 7
LV SCP comparator threshold V(LV_SCP) 16.5 20 24 mV VCS- < 3V 7
FLT pull-down resistance R(FLT) 10 22 60 Ω 7
TMR source current during overcurrent I(TMR_SRC_OCP) 65 85 97 µA 7
Voltage at TMR pin for FLT trigger V(TMR_FLT) 1.04 1.1 1.2 V 7
Regulated forward V(A)-V(C) threshold V(AC_REG) 3.6 10.4 13.7 mV 8
V(A)-V(C) threshold for fast reverse current blocking V(AC_REV) -16 -10.5 -5 mV 8
V(A)-V(C) threshold for reverse to forward transition V(AC_FWD) 150 177 200 mV 8
Gate drive voltage V(DGATE)-V(A) V(DGATE) - V(A) 9.2 11.5 14 V 5 V < V(S) < 65 V 8
Gate drive voltage V(HGATE)-V(OUT) V(HGATE) - V(OUT) 10 11.1 14.5 V 5 V < V(S) < 65 V 8
HGATE source current I(HGATE) 39 55 75 µA 8
Charge pump source current I(CAP) 1.3 2.7 mA V(CAP), V(A) = 7 V, 6 V ≤ V(S) ≤ 65 V 7
Charge pump turn-on voltage 11 12.2 13.2 V VCAP, VS 7

CAD (KiCad official)

  • Symbol: LM74930QRGERQ1
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm
  • 3D model: VQFN-24-EP(4x4) (KiCad packages3D, STEP)
  • 3D model files: lm74930qrgerq1-etched.step / lm74930qrgerq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm74930qrgerq1.step / lm74930qrgerq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (42 pp, sha256 d54d88498a76c31a, retrieved 2026-11-16, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF