main
Ray
Publish 0.1.0
460de9f
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295
{
"slug": "lm74930qrgerq1",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments Power Distribution Switches, VQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power management (pmic)",
"lm74930qrgerq1",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lm74930qrgerq1.kicad_sym",
"lm74930qrgerq1.kicad_mod",
"lm74930qrgerq1.glb",
"lm74930qrgerq1.step",
"lm74930qrgerq1.lbr",
"docs/hero.png",
"docs/lm74930qrgerq1-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lm74930qrgerq1-hero.glb",
"lm74930qrgerq1-hero.overlay.json"
],
"component": {
"mpn": "LM74930QRGERQ1",
"manufacturer": "Texas Instruments",
"package": "VQFN-24-EP(4x4)",
"pin_count": 25,
"category": "Power Management (PMIC)",
"subcategory": "Power Distribution Switches",
"datasheet": "https://www.ti.com/lit/ds/symlink/lm74930-q1.pdf",
"parts": {
"symbol": "lm74930qrgerq1.kicad_sym",
"footprint": "lm74930qrgerq1.kicad_mod",
"model_3d": "lm74930qrgerq1-hero.glb",
"model_3d_plain": "lm74930qrgerq1.glb",
"model_3d_step": "lm74930qrgerq1-etched.step",
"model_3d_step_plain": "lm74930qrgerq1.step",
"lbr": "lm74930qrgerq1.lbr"
},
"distributor_links": {
"digikey": "296-LM74930QRGERQ1CT-ND",
"mouser": "595-LM74930QRGERQ1"
},
"distributor_check": {
"checked_at": "2026-11-16T23:50:49Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-LM74930QRGERQ1CT-ND",
"status": "found"
},
"mouser": {
"pn": "595-LM74930QRGERQ1",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "DGATE",
"type": "output",
"description": "Diode controller gate drive output that connects to the gate of the external ideal diode MOSFET."
},
{
"number": "2",
"name": "A",
"type": "input",
"description": "Anode of the ideal diode that connects to the source of the external ideal diode MOSFET."
},
{
"number": "3",
"name": "SW",
"type": "input",
"description": "Voltage sensing disconnect switch terminal used as the top of the resistor ladder for the common source node, and the switch is OFF when EN is low."
},
{
"number": "4",
"name": "UVLO",
"type": "input",
"description": "Adjustable undervoltage threshold input that is pulled HGATE low when the voltage falls below the undervoltage cut-off, and should be tied to VS or EN when unused."
},
{
"number": "5",
"name": "OV",
"type": "input",
"description": "Adjustable overvoltage threshold input that pulls HGATE low when the sensed voltage exceeds the overvoltage cut-off, and should be tied to ground when unused."
},
{
"number": "6",
"name": "EN",
"type": "input",
"description": "Enable input that is connected to VS for always-on operation and enters low Iq shutdown when pulled below V(ENF)."
},
{
"number": "7",
"name": "MODE",
"type": "input",
"description": "MODE input that disables the reverse current blocking function of DGATE when pulled low, and can be tied to EN or VS when unused."
},
{
"number": "8",
"name": "N.C",
"type": "unconnected",
"description": "No connection pin that must be kept floating."
},
{
"number": "9",
"name": "TMR",
"type": "passive",
"description": "Fault timer input where a capacitor to GND sets the fault warning, fault turn-off and retry periods, and connecting it to GND disables overcurrent protection."
},
{
"number": "10",
"name": "IMON",
"type": "output",
"description": "Analog current monitor output that sources a scaled-down ratio of the current through RSENSE, converted to voltage by a resistor to GND."
},
{
"number": "11",
"name": "ILIM",
"type": "passive",
"description": "Overcurrent detection setting pin where a resistor to GND sets the overcurrent comparator threshold, and connecting to GND disables overcurrent protection."
},
{
"number": "12",
"name": "FLT",
"type": "output",
"description": "Open-drain fault output that is pulled low during undervoltage, overvoltage, overcurrent and short circuit events."
},
{
"number": "13",
"name": "GND",
"type": "power_in",
"description": "Ground pin that connects to the system ground plane."
},
{
"number": "14",
"name": "HGATE",
"type": "output",
"description": "GATE driver output for the HSFET that connects to the gate of the external load switch MOSFET."
},
{
"number": "15",
"name": "OUT",
"type": "input",
"description": "Connects to the common source rail, which is the source of the external load switch MOSFET."
},
{
"number": "16",
"name": "OVCLAMP",
"type": "input",
"description": "Overvoltage clamp input with circuit breaker (timer) functionality that connects to the OV pin, and is tied to ground when unused."
},
{
"number": "17",
"name": "N.C",
"type": "unconnected",
"description": "No connection pin that must be kept floating."
},
{
"number": "18",
"name": "ISCP",
"type": "input",
"description": "Short-circuit detection threshold setting pin, where connecting it to C sets an internal fixed 20 mV threshold for output short circuit detection."
},
{
"number": "19",
"name": "CS-",
"type": "input",
"description": "Current sense negative input."
},
{
"number": "20",
"name": "CS+",
"type": "input",
"description": "Current sense positive input that connects through a 50-Ω resistor to the external current sense resistor."
},
{
"number": "21",
"name": "N.C",
"type": "unconnected",
"description": "No connection pin that must be kept floating."
},
{
"number": "22",
"name": "VS",
"type": "power_in",
"description": "Input power supply to the IC that requires a 100-nF capacitor across VS and GND."
},
{
"number": "23",
"name": "CAP",
"type": "output",
"description": "Internal charge pump output that requires a 100-nF capacitor across CAP and VS."
},
{
"number": "24",
"name": "C",
"type": "input",
"description": "Cathode of the ideal diode that connects to the drain of the external ideal diode MOSFET."
},
{
"number": "25",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The exposed thermal pad is labeled RTN in the datasheet but is not a numbered pin, so it is omitted ",
"exposed pad 25 added from the footprint"
],
"pages_sent": 8,
"cost_usd": 0.0426,
"at": "2026-11-16T23:51:21"
},
"datasheet": {
"url": "https://www.ti.com/lit/ds/symlink/lm74930-q1.pdf",
"pages": 42,
"sha256": "d54d88498a76c31a",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 25,
"described": 25,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lm74930qrgerq1.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.0,
4.0,
0.77
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "096fc110543e6d324c5120c2d38e3dca87a389da9b6fac234f1fe40856295ef4",
"checked": "2026-11-16",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lm74930qrgerq1-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.0,
4.0,
0.77
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "906523c5ca790f3aee666f2597ed39eac6fdda7a965606320b5a939277f940aa",
"checked": "2026-11-16",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}