main
Ray lm74910qrgerq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 1572733
{
  "schema_version": 1,
  "type": "component",
  "slug": "lm74910qrgerq1",
  "title": "LM74910QRGERQ1",
  "brief": "Texas Instruments Power Distribution Switches, VQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "lm74910qrgerq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "LM74910QRGERQ1",
    "manufacturer": "Texas Instruments",
    "package": "VQFN-24-EP(4x4)",
    "pin_count": 25,
    "category": "Power Management (PMIC)",
    "subcategory": "Power Distribution Switches",
    "datasheet": "https://www.ti.com.cn/cn/lit/ds/symlink/lm74910-q1.pdf?ts=1739432271354&ref_url=https%253A%252F%252Fwww.ti.com.cn%252Fsitesearch%252Fzh-cn%252Fdocs%252Funiversalsearch.tsp%253FlangPref%253Dzh-CN%2526nr%253D8%2526searchTerm%253DLM74910QRGERQ1",
    "parts": {
      "symbol": "lm74910qrgerq1.kicad_sym",
      "footprint": "lm74910qrgerq1.kicad_mod",
      "model_3d": "lm74910qrgerq1-etched.glb",
      "model_3d_plain": "lm74910qrgerq1.glb",
      "model_3d_step": "lm74910qrgerq1-etched.step",
      "model_3d_step_plain": "lm74910qrgerq1.step",
      "lbr": "lm74910qrgerq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C22427891"
    },
    "pins": [
      {
        "number": "1",
        "name": "DGATE",
        "type": "output",
        "description": "Diode controller gate-drive output that connects to the gate of the external ideal-diode MOSFET."
      },
      {
        "number": "2",
        "name": "A",
        "type": "input",
        "description": "Anode of the ideal diode; connects to the source of the external MOSFET (Q1) and is monitored for the AC-DC forward regulation and fast reverse-voltage comparator."
      },
      {
        "number": "3",
        "name": "SW",
        "type": "input",
        "description": "Voltage-sense disconnect switch terminal internally connected to VSNS; used as the top connection for the battery-detect or OV resistor ladder and disconnects when EN is pulled low; short to VS if the internal switch is unused."
      },
      {
        "number": "4",
        "name": "UVLO",
        "type": "input",
        "description": "Adjustable undervoltage threshold input; a resistor divider from SW to UVLO to GND sets the UVLO falling threshold that pulls HGATE low to turn off the HSFET."
      },
      {
        "number": "5",
        "name": "OV",
        "type": "input",
        "description": "Adjustable overvoltage threshold input; a resistor divider from SW to OV sets the OV cutoff threshold that pulls HGATE low to turn off the HSFET."
      },
      {
        "number": "6",
        "name": "EN",
        "type": "input",
        "description": "Enable input, typically tied to VS for always-on operation or driven externally; pulling it below V(ENF) places the device in the low-IQ shutdown mode."
      },
      {
        "number": "7",
        "name": "SLEEP",
        "type": "input",
        "description": "Active-low sleep-mode input driven by a microcontroller; pulling it low turns off the charge pump and gate drivers and powers the output through an internal current-limited bypass switch."
      },
      {
        "number": "8",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "9",
        "name": "TMR",
        "type": "input",
        "description": "Fault timer input; a capacitor from TMR to GND sets the overcurrent-warning, fault (FLT), and retry timing, leaving it open sets the fastest timing, and tying it to GND disables overcurrent protection."
      },
      {
        "number": "10",
        "name": "IMON",
        "type": "output",
        "description": "Analog current-monitor output that sources a scaled current through the external RSNS sense resistor; an external resistor to GND converts this current to a proportional voltage, and the pin should float if unused."
      },
      {
        "number": "11",
        "name": "ILIM",
        "type": "input",
        "description": "Overcurrent detection set pin; a resistor from ILIM to GND sets the overcurrent comparator threshold, and ILIM should be tied to GND if overcurrent protection is not needed."
      },
      {
        "number": "12",
        "name": "FLT",
        "type": "output",
        "description": "Open-drain fault output that is pulled low during a UVLO, OV, OCP, or SCP event."
      },
      {
        "number": "13",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection to the system ground plane."
      },
      {
        "number": "14",
        "name": "HGATE",
        "type": "output",
        "description": "Gate-drive output for the load-disconnect HSFET; connects to the gate of the external MOSFET (Q2)."
      },
      {
        "number": "15",
        "name": "OUT",
        "type": "input",
        "description": "Connection to the output power rail (external MOSFET source) used to sense the output voltage for load-disconnect control."
      },
      {
        "number": "16",
        "name": "SLEEP_OV",
        "type": "input",
        "description": "Sleep-mode overvoltage protection pin; connect to VS for OV cutoff behavior or to OUT for OV clamp behavior during sleep mode."
      },
      {
        "number": "17",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "18",
        "name": "ISCP",
        "type": "input",
        "description": "Short-circuit detection threshold set pin; leave floating if short-circuit protection is not needed, or tie to CS+ to set the internal fixed 20 mV threshold."
      },
      {
        "number": "19",
        "name": "CS-",
        "type": "input",
        "description": "Negative input of the current-sense amplifier."
      },
      {
        "number": "20",
        "name": "CS+",
        "type": "input",
        "description": "Positive input of the current-sense amplifier; connect a 50 to 100 mΩ resistor between CS+ and the external current-sense resistor."
      },
      {
        "number": "21",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "22",
        "name": "VS",
        "type": "power_in",
        "description": "IC input power supply; connect VS to the mid-point of the common-drain back-to-back MOSFET configuration and place a 100 nF capacitor between VS and GND."
      },
      {
        "number": "23",
        "name": "CAP",
        "type": "output",
        "description": "Charge-pump output; place a 100 nF capacitor between CAP and VS to supply the gate-drive charge pump."
      },
      {
        "number": "24",
        "name": "C",
        "type": "input",
        "description": "Cathode of the ideal diode; connects to the drain of the external MOSFET (Q1)."
      },
      {
        "number": "25",
        "name": "RTN",
        "type": "unconnected",
        "description": "Exposed thermal pad; keep it floating and do not connect it to the GND plane."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Thermal pad (RTN) is exposed on bottom and must be soldered to PCB but kept floating from GND plane ",
          "exposed pad 25 added from the footprint"
        ],
        "pages_sent": 50,
        "cost_usd": 0.5367,
        "at": "2026-09-23T03:05:20"
      },
      "datasheet": {
        "url": "https://www.ti.com.cn/cn/lit/ds/symlink/lm74910-q1.pdf?ts=1739432271354&ref_url=https%253A%252F%252Fwww.ti.com.cn%252Fsitesearch%252Fzh-cn%252Fdocs%252Funiversalsearch.tsp%253FlangPref%253Dzh-CN%2526nr%253D8%2526searchTerm%253DLM74910QRGERQ1",
        "pages": 50,
        "sha256": "0dec8e92d6d855bd",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 25,
        "described": 25,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm74910qrgerq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          4,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "096fc110543e6d324c5120c2d38e3dca87a389da9b6fac234f1fe40856295ef4",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm74910qrgerq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          4,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "1fd41aab667e68eb6e2955baf6807bb88e95f8bd0c82eb7ba4394d508ddf4942",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "VQFN-24-EP(4x4)",
      "Category": "Power Management (PMIC)",
      "Pins": "25"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "lm74910qrgerq1"
  ],
  "discovery_pitch": "LM74910QRGERQ1 (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm74910qrgerq1.kicad_sym",
    "lm74910qrgerq1.kicad_mod",
    "lm74910qrgerq1.glb",
    "lm74910qrgerq1.step",
    "lm74910qrgerq1.lbr",
    "docs/hero.png",
    "docs/lm74910qrgerq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-28T17:07:52.374Z"
}