component
LM74910QRGERQ1
Public Made by Adomby adom
Texas Instruments Power Distribution Switches, VQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
lm74910qrgerq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
1572733
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280
{
"slug": "lm74910qrgerq1",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments Power Distribution Switches, VQFN-24-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power management (pmic)",
"lm74910qrgerq1",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lm74910qrgerq1.kicad_sym",
"lm74910qrgerq1.kicad_mod",
"lm74910qrgerq1.glb",
"lm74910qrgerq1.step",
"lm74910qrgerq1.lbr",
"docs/hero.png",
"docs/lm74910qrgerq1-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"component": {
"mpn": "LM74910QRGERQ1",
"manufacturer": "Texas Instruments",
"package": "VQFN-24-EP(4x4)",
"pin_count": 25,
"category": "Power Management (PMIC)",
"subcategory": "Power Distribution Switches",
"datasheet": "https://www.ti.com.cn/cn/lit/ds/symlink/lm74910-q1.pdf?ts=1739432271354&ref_url=https%253A%252F%252Fwww.ti.com.cn%252Fsitesearch%252Fzh-cn%252Fdocs%252Funiversalsearch.tsp%253FlangPref%253Dzh-CN%2526nr%253D8%2526searchTerm%253DLM74910QRGERQ1",
"parts": {
"symbol": "lm74910qrgerq1.kicad_sym",
"footprint": "lm74910qrgerq1.kicad_mod",
"model_3d": "lm74910qrgerq1-etched.glb",
"model_3d_plain": "lm74910qrgerq1.glb",
"model_3d_step": "lm74910qrgerq1-etched.step",
"model_3d_step_plain": "lm74910qrgerq1.step",
"lbr": "lm74910qrgerq1.lbr"
},
"distributor_links": {
"lcsc": "C22427891"
},
"pins": [
{
"number": "1",
"name": "DGATE",
"type": "output",
"description": "Diode controller gate-drive output that connects to the gate of the external ideal-diode MOSFET."
},
{
"number": "2",
"name": "A",
"type": "input",
"description": "Anode of the ideal diode; connects to the source of the external MOSFET (Q1) and is monitored for the AC-DC forward regulation and fast reverse-voltage comparator."
},
{
"number": "3",
"name": "SW",
"type": "input",
"description": "Voltage-sense disconnect switch terminal internally connected to VSNS; used as the top connection for the battery-detect or OV resistor ladder and disconnects when EN is pulled low; short to VS if the internal switch is unused."
},
{
"number": "4",
"name": "UVLO",
"type": "input",
"description": "Adjustable undervoltage threshold input; a resistor divider from SW to UVLO to GND sets the UVLO falling threshold that pulls HGATE low to turn off the HSFET."
},
{
"number": "5",
"name": "OV",
"type": "input",
"description": "Adjustable overvoltage threshold input; a resistor divider from SW to OV sets the OV cutoff threshold that pulls HGATE low to turn off the HSFET."
},
{
"number": "6",
"name": "EN",
"type": "input",
"description": "Enable input, typically tied to VS for always-on operation or driven externally; pulling it below V(ENF) places the device in the low-IQ shutdown mode."
},
{
"number": "7",
"name": "SLEEP",
"type": "input",
"description": "Active-low sleep-mode input driven by a microcontroller; pulling it low turns off the charge pump and gate drivers and powers the output through an internal current-limited bypass switch."
},
{
"number": "8",
"name": "NC",
"type": "unconnected",
"description": "No internal connection."
},
{
"number": "9",
"name": "TMR",
"type": "input",
"description": "Fault timer input; a capacitor from TMR to GND sets the overcurrent-warning, fault (FLT), and retry timing, leaving it open sets the fastest timing, and tying it to GND disables overcurrent protection."
},
{
"number": "10",
"name": "IMON",
"type": "output",
"description": "Analog current-monitor output that sources a scaled current through the external RSNS sense resistor; an external resistor to GND converts this current to a proportional voltage, and the pin should float if unused."
},
{
"number": "11",
"name": "ILIM",
"type": "input",
"description": "Overcurrent detection set pin; a resistor from ILIM to GND sets the overcurrent comparator threshold, and ILIM should be tied to GND if overcurrent protection is not needed."
},
{
"number": "12",
"name": "FLT",
"type": "output",
"description": "Open-drain fault output that is pulled low during a UVLO, OV, OCP, or SCP event."
},
{
"number": "13",
"name": "GND",
"type": "power_in",
"description": "Ground connection to the system ground plane."
},
{
"number": "14",
"name": "HGATE",
"type": "output",
"description": "Gate-drive output for the load-disconnect HSFET; connects to the gate of the external MOSFET (Q2)."
},
{
"number": "15",
"name": "OUT",
"type": "input",
"description": "Connection to the output power rail (external MOSFET source) used to sense the output voltage for load-disconnect control."
},
{
"number": "16",
"name": "SLEEP_OV",
"type": "input",
"description": "Sleep-mode overvoltage protection pin; connect to VS for OV cutoff behavior or to OUT for OV clamp behavior during sleep mode."
},
{
"number": "17",
"name": "NC",
"type": "unconnected",
"description": "No internal connection."
},
{
"number": "18",
"name": "ISCP",
"type": "input",
"description": "Short-circuit detection threshold set pin; leave floating if short-circuit protection is not needed, or tie to CS+ to set the internal fixed 20 mV threshold."
},
{
"number": "19",
"name": "CS-",
"type": "input",
"description": "Negative input of the current-sense amplifier."
},
{
"number": "20",
"name": "CS+",
"type": "input",
"description": "Positive input of the current-sense amplifier; connect a 50 to 100 mΩ resistor between CS+ and the external current-sense resistor."
},
{
"number": "21",
"name": "NC",
"type": "unconnected",
"description": "No internal connection."
},
{
"number": "22",
"name": "VS",
"type": "power_in",
"description": "IC input power supply; connect VS to the mid-point of the common-drain back-to-back MOSFET configuration and place a 100 nF capacitor between VS and GND."
},
{
"number": "23",
"name": "CAP",
"type": "output",
"description": "Charge-pump output; place a 100 nF capacitor between CAP and VS to supply the gate-drive charge pump."
},
{
"number": "24",
"name": "C",
"type": "input",
"description": "Cathode of the ideal diode; connects to the drain of the external MOSFET (Q1)."
},
{
"number": "25",
"name": "RTN",
"type": "unconnected",
"description": "Exposed thermal pad; keep it floating and do not connect it to the GND plane."
}
],
"provenance": {
"extractor": "extract_pins 0.2",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.2",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Thermal pad (RTN) is exposed on bottom and must be soldered to PCB but kept floating from GND plane ",
"exposed pad 25 added from the footprint"
],
"pages_sent": 50,
"cost_usd": 0.5367,
"at": "2026-09-23T03:05:20"
},
"datasheet": {
"url": "https://www.ti.com.cn/cn/lit/ds/symlink/lm74910-q1.pdf?ts=1739432271354&ref_url=https%253A%252F%252Fwww.ti.com.cn%252Fsitesearch%252Fzh-cn%252Fdocs%252Funiversalsearch.tsp%253FlangPref%253Dzh-CN%2526nr%253D8%2526searchTerm%253DLM74910QRGERQ1",
"pages": 50,
"sha256": "0dec8e92d6d855bd",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 25,
"described": 25,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lm74910qrgerq1.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.0,
4.0,
0.77
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "096fc110543e6d324c5120c2d38e3dca87a389da9b6fac234f1fe40856295ef4",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lm74910qrgerq1-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.0,
4.0,
0.77
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "1fd41aab667e68eb6e2955baf6807bb88e95f8bd0c82eb7ba4394d508ddf4942",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}