main
Ray Initial commit: component/lm74900qrgerq1 ddfed87

LM74900QRGERQ1

Texas Instruments · Power Distribution Switches · VQFN-24(4x4)

LM74900QRGERQ1 from Texas Instruments, in a VQFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DGATE output Ideal-diode MOSFET Q1 gate drive output; V(DGATE)-V(A) = 9.2-14 V for VS 5-65 V, peak source 18.5 mA, peak sink 2.6 A; connect to GATE of external N-channel MOSFET.
2 A input Ideal-diode anode; connects to SOURCE of external MOSFET Q1; forward drop regulated at 10.5 mV (typ), fast reverse-blocking threshold -10.5 mV (typ); withstands -60 V to 65 V.
3 SW input Battery sensing disconnect switch terminal; top node of OV/UVLO resistor ladder; internal switch resistance 10-46 Ω (3-65 V) disconnects ladder when EN or SLEEP is low to eliminate leakage.
4 UVLO input Adjustable undervoltage threshold input; resistor ladder from SW through UVLO to GND; rising threshold 0.585-0.630 V, falling 0.533-0.573 V; HGATE pulled low on undervoltage event; leakage 50-200 nA.
5 OV input Adjustable overvoltage threshold input; resistor ladder from SW through OV to GND; rising threshold 0.585-0.630 V, falling 0.533-0.573 V; HGATE pulled low on overvoltage event; leakage 50-200 nA.
6 EN input Enable input; logic high enables charge pump and gate drivers; falling below V(ENF) 0.41-0.98 V places device in shutdown at 2.5-5 µA; connect to VS for always-ON; withstands 0-65 V, leakage 55-200 nA.
7 SLEEP input Active-low SLEEP mode input; when low with EN high, disables charge pump and both gate drives, device draws 5.5-10 µA; internal bypass switch supports up to 100 mA peak to always-ON loads.
8 NC unconnected No internal connection; leave unconnected.
9 TMR passive Fault timer node; capacitor from TMR to GND sets circuit-breaker turn-off delay (CTMR charged at 65-97 µA source, discharged at 2-3.15 µA sink) and auto-retry period; leave open for fastest response or tie to GND to disable OCP.
10 IMON output Analog current monitor output; sources scaled replica of sense voltage per VIMON = (RIMON/0.9) × (VSENSE/RSET); accuracy ±12.5% at VSENSE = 20 mV; output range 0-5 V; leave floating if unused.
11 ILIM input Overcurrent threshold setting input; resistor RILIM from ILIM to GND programs OCP comparator (V(SNS_TH) rising 1.08-1.32 V); connect to GND to disable overcurrent protection.
12 FLT output Open-drain fault output; pulled low on UVLO, OV, OCP, or SCP events; pull-down resistance 11-60 Ω; withstands 0-65 V; leakage -100 to +400 nA; requires external pull-up resistor.
13 GND power_in Ground reference; connect to system ground plane.
14 HGATE output Load-disconnect MOSFET Q2 gate drive output; V(HGATE)-V(OUT) = 10-14.5 V for VS 5-65 V; source current 39-75 µA, sink current 128-180 mA during OV event; connect to GATE of external N-channel MOSFET.
15 OUT input Output rail sense input; connect to SOURCE of external MOSFET Q2; serves as reference for HGATE driver; absolute maximum OUT to VS = -65 V to +5 V.
16 SLEEP_OV input SLEEP-mode overvoltage protection pin; connect to VS (or C) for OV cut-off functionality or to OUT for OV clamp; default SLEEP-mode OV rising threshold 19.3-23 V; leave floating when SLEEP mode not used.
17 NC unconnected No internal connection; leave unconnected.
18 ISCP input Short-circuit protection threshold setting; leave floating to disable SCP; short to CS+ for 20 mV (typ) internal threshold; external series RISCP shifts threshold by 10.5 µA × RISCP + 20 mV; bias current 9.5-12 µA.
19 CS- input Current sense amplifier negative input; connect to negative terminal of external sense resistor RSNS; differential range CS+ to CS- limited to -0.3 V to +0.3 V absolute maximum.
20 CS+ input Current sense amplifier positive input; connect to positive terminal of external sense resistor RSNS; RSET (50-100 Ω) from CS+ to VS scales OCP threshold; differential range CS+ to CS- limited to -0.3 V to +0.3 V absolute maximum.
21 NC unconnected No internal connection; leave unconnected.
22 VS power_in IC power supply input; connect to common-drain midpoint of back-to-back MOSFET configuration; operating range 3-65 V; decouple with 100-nF capacitor to GND; quiescent current 630-750 µA (EN high, 12 V).
23 CAP output Charge pump capacitor output; connect 100-nF capacitor between CAP and VS; charge pump cycles V(CAP)-V(VS) between 12.2 V (enable) and 13.2 V (disable) typ; V(CAP)-V(A) absolute maximum 85 V.
24 C input Ideal-diode cathode; connect to DRAIN of external MOSFET Q1; V(A)-V(C) monitored to regulate forward drop at 10.5 mV and trigger fast turn-off below -10.5 mV; C to A absolute maximum 85 V.
25 RTN unconnected Exposed thermal pad (RTN); datasheet explicitly states leave floating and do not connect to GND plane; absolute maximum RTN to GND = -65 V to +0.3 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-24(4x4)
Category Power Management (PMIC)
Pins 25

CAD (KiCad official)

  • Symbol: LM74900QRGERQ1
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm
  • 3D model: VQFN-24(4x4) (KiCad packages3D, STEP)
  • 3D model files: lm74900qrgerq1-etched.step / lm74900qrgerq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm74900qrgerq1.step / lm74900qrgerq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (48 pp, sha256 fc650de4293fb2b1, retrieved 2026-09-25, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF