← Commit history

Initial commit: component/lm74900qrgerq1

Ray ·ddfed87d9f ·
2 files changed +322
README.mdadded+61
@@ -0,0 +1,61 @@+# LM74900QRGERQ1++**Texas Instruments** · Power Distribution Switches · VQFN-24(4x4)++LM74900QRGERQ1 from Texas Instruments, in a VQFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | DGATE | output | Ideal-diode MOSFET Q1 gate drive output; V(DGATE)-V(A) = 9.2-14 V for VS 5-65 V, peak source 18.5 mA, peak sink 2.6 A; connect to GATE of external N-channel MOSFET. |+| 2 | A | input | Ideal-diode anode; connects to SOURCE of external MOSFET Q1; forward drop regulated at 10.5 mV (typ), fast reverse-blocking threshold -10.5 mV (typ); withstands -60 V to 65 V. |+| 3 | SW | input | Battery sensing disconnect switch terminal; top node of OV/UVLO resistor ladder; internal switch resistance 10-46 Ω (3-65 V) disconnects ladder when EN or SLEEP is low to eliminate leakage. |+| 4 | UVLO | input | Adjustable undervoltage threshold input; resistor ladder from SW through UVLO to GND; rising threshold 0.585-0.630 V, falling 0.533-0.573 V; HGATE pulled low on undervoltage event; leakage 50-200 nA. |+| 5 | OV | input | Adjustable overvoltage threshold input; resistor ladder from SW through OV to GND; rising threshold 0.585-0.630 V, falling 0.533-0.573 V; HGATE pulled low on overvoltage event; leakage 50-200 nA. |+| 6 | EN | input | Enable input; logic high enables charge pump and gate drivers; falling below V(ENF) 0.41-0.98 V places device in shutdown at 2.5-5 µA; connect to VS for always-ON; withstands 0-65 V, leakage 55-200 nA. |+| 7 | SLEEP | input | Active-low SLEEP mode input; when low with EN high, disables charge pump and both gate drives, device draws 5.5-10 µA; internal bypass switch supports up to 100 mA peak to always-ON loads. |+| 8 | NC | unconnected | No internal connection; leave unconnected. |+| 9 | TMR | passive | Fault timer node; capacitor from TMR to GND sets circuit-breaker turn-off delay (CTMR charged at 65-97 µA source, discharged at 2-3.15 µA sink) and auto-retry period; leave open for fastest response or tie to GND to disable OCP. |+| 10 | IMON | output | Analog current monitor output; sources scaled replica of sense voltage per VIMON = (RIMON/0.9) × (VSENSE/RSET); accuracy ±12.5% at VSENSE = 20 mV; output range 0-5 V; leave floating if unused. |+| 11 | ILIM | input | Overcurrent threshold setting input; resistor RILIM from ILIM to GND programs OCP comparator (V(SNS_TH) rising 1.08-1.32 V); connect to GND to disable overcurrent protection. |+| 12 | FLT | output | Open-drain fault output; pulled low on UVLO, OV, OCP, or SCP events; pull-down resistance 11-60 Ω; withstands 0-65 V; leakage -100 to +400 nA; requires external pull-up resistor. |+| 13 | GND | power_in | Ground reference; connect to system ground plane. |+| 14 | HGATE | output | Load-disconnect MOSFET Q2 gate drive output; V(HGATE)-V(OUT) = 10-14.5 V for VS 5-65 V; source current 39-75 µA, sink current 128-180 mA during OV event; connect to GATE of external N-channel MOSFET. |+| 15 | OUT | input | Output rail sense input; connect to SOURCE of external MOSFET Q2; serves as reference for HGATE driver; absolute maximum OUT to VS = -65 V to +5 V. |+| 16 | SLEEP_OV | input | SLEEP-mode overvoltage protection pin; connect to VS (or C) for OV cut-off functionality or to OUT for OV clamp; default SLEEP-mode OV rising threshold 19.3-23 V; leave floating when SLEEP mode not used. |+| 17 | NC | unconnected | No internal connection; leave unconnected. |+| 18 | ISCP | input | Short-circuit protection threshold setting; leave floating to disable SCP; short to CS+ for 20 mV (typ) internal threshold; external series RISCP shifts threshold by 10.5 µA × RISCP + 20 mV; bias current 9.5-12 µA. |+| 19 | CS- | input | Current sense amplifier negative input; connect to negative terminal of external sense resistor RSNS; differential range CS+ to CS- limited to -0.3 V to +0.3 V absolute maximum. |+| 20 | CS+ | input | Current sense amplifier positive input; connect to positive terminal of external sense resistor RSNS; RSET (50-100 Ω) from CS+ to VS scales OCP threshold; differential range CS+ to CS- limited to -0.3 V to +0.3 V absolute maximum. |+| 21 | NC | unconnected | No internal connection; leave unconnected. |+| 22 | VS | power_in | IC power supply input; connect to common-drain midpoint of back-to-back MOSFET configuration; operating range 3-65 V; decouple with 100-nF capacitor to GND; quiescent current 630-750 µA (EN high, 12 V). |+| 23 | CAP | output | Charge pump capacitor output; connect 100-nF capacitor between CAP and VS; charge pump cycles V(CAP)-V(VS) between 12.2 V (enable) and 13.2 V (disable) typ; V(CAP)-V(A) absolute maximum 85 V. |+| 24 | C | input | Ideal-diode cathode; connect to DRAIN of external MOSFET Q1; V(A)-V(C) monitored to regulate forward drop at 10.5 mV and trigger fast turn-off below -10.5 mV; C to A absolute maximum 85 V. |+| 25 | RTN | unconnected | Exposed thermal pad (RTN); datasheet explicitly states leave floating and do not connect to GND plane; absolute maximum RTN to GND = -65 V to +0.3 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-24(4x4) |+| Category | Power Management (PMIC) |+| Pins | 25 |++## CAD (KiCad official)++- Symbol: `LM74900QRGERQ1`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm`+- 3D model: VQFN-24(4x4) (KiCad packages3D, STEP)+- 3D model files: `lm74900qrgerq1-etched.step` / `lm74900qrgerq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm74900qrgerq1.step` / `lm74900qrgerq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603384185638182912) (48 pp, sha256 `fc650de4293fb2b1`, retrieved 2026-09-25, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm74900qrgerq1-datasheet.pdf)
page.jsonadded+261
@@ -0,0 +1,261 @@+{+  "slug": "lm74900qrgerq1",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Power Distribution Switches, VQFN-24(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "lm74900qrgerq1",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lm74900qrgerq1.kicad_sym",+    "lm74900qrgerq1.kicad_mod",+    "lm74900qrgerq1.glb",+    "lm74900qrgerq1.step",+    "lm74900qrgerq1.lbr",+    "docs/hero.png",+    "docs/lm74900qrgerq1-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LM74900QRGERQ1",+    "manufacturer": "Texas Instruments",+    "package": "VQFN-24(4x4)",+    "pin_count": 25,+    "category": "Power Management (PMIC)",+    "subcategory": "Power Distribution Switches",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603384185638182912",+    "parts": {+      "symbol": "lm74900qrgerq1.kicad_sym",+      "footprint": "lm74900qrgerq1.kicad_mod",+      "model_3d": "lm74900qrgerq1-etched.glb",+      "model_3d_plain": "lm74900qrgerq1.glb",+      "model_3d_step": "lm74900qrgerq1-etched.step",+      "model_3d_step_plain": "lm74900qrgerq1.step",+      "lbr": "lm74900qrgerq1.lbr"+    },+    "distributor_links": {+      "lcsc": "C20345498",+      "digikey": "296-LM74900QRGERQ1TR-ND",+      "mouser": "595-LM74900QRGERQ1"+    },+    "distributor_check": {+      "checked_at": "2026-09-25T13:54:08Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-LM74900QRGERQ1TR-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-LM74900QRGERQ1",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "DGATE",+        "type": "output",+        "description": "Ideal-diode MOSFET Q1 gate drive output; V(DGATE)-V(A) = 9.2-14 V for VS 5-65 V, peak source 18.5 mA, peak sink 2.6 A; connect to GATE of external N-channel MOSFET."+      },+      {+        "number": "2",+        "name": "A",+        "type": "input",+        "description": "Ideal-diode anode; connects to SOURCE of external MOSFET Q1; forward drop regulated at 10.5 mV (typ), fast reverse-blocking threshold -10.5 mV (typ); withstands -60 V to 65 V."+      },+      {+        "number": "3",+        "name": "SW",+        "type": "input",+        "description": "Battery sensing disconnect switch terminal; top node of OV/UVLO resistor ladder; internal switch resistance 10-46 Ω (3-65 V) disconnects ladder when EN or SLEEP is low to eliminate leakage."+      },+      {+        "number": "4",+        "name": "UVLO",+        "type": "input",+        "description": "Adjustable undervoltage threshold input; resistor ladder from SW through UVLO to GND; rising threshold 0.585-0.630 V, falling 0.533-0.573 V; HGATE pulled low on undervoltage event; leakage 50-200 nA."+      },+      {+        "number": "5",+        "name": "OV",+        "type": "input",+        "description": "Adjustable overvoltage threshold input; resistor ladder from SW through OV to GND; rising threshold 0.585-0.630 V, falling 0.533-0.573 V; HGATE pulled low on overvoltage event; leakage 50-200 nA."+      },+      {+        "number": "6",+        "name": "EN",+        "type": "input",+        "description": "Enable input; logic high enables charge pump and gate drivers; falling below V(ENF) 0.41-0.98 V places device in shutdown at 2.5-5 µA; connect to VS for always-ON; withstands 0-65 V, leakage 55-200 nA."+      },+      {+        "number": "7",+        "name": "SLEEP",+        "type": "input",+        "description": "Active-low SLEEP mode input; when low with EN high, disables charge pump and both gate drives, device draws 5.5-10 µA; internal bypass switch supports up to 100 mA peak to always-ON loads."+      },+      {+        "number": "8",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection; leave unconnected."+      },+      {+        "number": "9",+        "name": "TMR",+        "type": "passive",+        "description": "Fault timer node; capacitor from TMR to GND sets circuit-breaker turn-off delay (CTMR charged at 65-97 µA source, discharged at 2-3.15 µA sink) and auto-retry period; leave open for fastest response or tie to GND to disable OCP."+      },+      {+        "number": "10",+        "name": "IMON",+        "type": "output",+        "description": "Analog current monitor output; sources scaled replica of sense voltage per VIMON = (RIMON/0.9) × (VSENSE/RSET); accuracy ±12.5% at VSENSE = 20 mV; output range 0-5 V; leave floating if unused."+      },+      {+        "number": "11",+        "name": "ILIM",+        "type": "input",+        "description": "Overcurrent threshold setting input; resistor RILIM from ILIM to GND programs OCP comparator (V(SNS_TH) rising 1.08-1.32 V); connect to GND to disable overcurrent protection."+      },+      {+        "number": "12",+        "name": "FLT",+        "type": "output",+        "description": "Open-drain fault output; pulled low on UVLO, OV, OCP, or SCP events; pull-down resistance 11-60 Ω; withstands 0-65 V; leakage -100 to +400 nA; requires external pull-up resistor."+      },+      {+        "number": "13",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference; connect to system ground plane."+      },+      {+        "number": "14",+        "name": "HGATE",+        "type": "output",+        "description": "Load-disconnect MOSFET Q2 gate drive output; V(HGATE)-V(OUT) = 10-14.5 V for VS 5-65 V; source current 39-75 µA, sink current 128-180 mA during OV event; connect to GATE of external N-channel MOSFET."+      },+      {+        "number": "15",+        "name": "OUT",+        "type": "input",+        "description": "Output rail sense input; connect to SOURCE of external MOSFET Q2; serves as reference for HGATE driver; absolute maximum OUT to VS = -65 V to +5 V."+      },+      {+        "number": "16",+        "name": "SLEEP_OV",+        "type": "input",+        "description": "SLEEP-mode overvoltage protection pin; connect to VS (or C) for OV cut-off functionality or to OUT for OV clamp; default SLEEP-mode OV rising threshold 19.3-23 V; leave floating when SLEEP mode not used."+      },+      {+        "number": "17",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection; leave unconnected."+      },+      {+        "number": "18",+        "name": "ISCP",+        "type": "input",+        "description": "Short-circuit protection threshold setting; leave floating to disable SCP; short to CS+ for 20 mV (typ) internal threshold; external series RISCP shifts threshold by 10.5 µA × RISCP + 20 mV; bias current 9.5-12 µA."+      },+      {+        "number": "19",+        "name": "CS-",+        "type": "input",+        "description": "Current sense amplifier negative input; connect to negative terminal of external sense resistor RSNS; differential range CS+ to CS- limited to -0.3 V to +0.3 V absolute maximum."+      },+      {+        "number": "20",+        "name": "CS+",+        "type": "input",+        "description": "Current sense amplifier positive input; connect to positive terminal of external sense resistor RSNS; RSET (50-100 Ω) from CS+ to VS scales OCP threshold; differential range CS+ to CS- limited to -0.3 V to +0.3 V absolute maximum."+      },+      {+        "number": "21",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection; leave unconnected."+      },+      {+        "number": "22",+        "name": "VS",+        "type": "power_in",+        "description": "IC power supply input; connect to common-drain midpoint of back-to-back MOSFET configuration; operating range 3-65 V; decouple with 100-nF capacitor to GND; quiescent current 630-750 µA (EN high, 12 V)."+      },+      {+        "number": "23",+        "name": "CAP",+        "type": "output",+        "description": "Charge pump capacitor output; connect 100-nF capacitor between CAP and VS; charge pump cycles V(CAP)-V(VS) between 12.2 V (enable) and 13.2 V (disable) typ; V(CAP)-V(A) absolute maximum 85 V."+      },+      {+        "number": "24",+        "name": "C",+        "type": "input",+        "description": "Ideal-diode cathode; connect to DRAIN of external MOSFET Q1; V(A)-V(C) monitored to regulate forward drop at 10.5 mV and trigger fast turn-off below -10.5 mV; C to A absolute maximum 85 V."+      },+      {+        "number": "25",+        "name": "RTN",+        "type": "unconnected",+        "description": "Exposed thermal pad (RTN); datasheet explicitly states leave floating and do not connect to GND plane; absolute maximum RTN to GND = -65 V to +0.3 V."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Thermal pad (RTN) is listed in the pin functions table (page 4) without an explicit pin number, thou",+          "exposed pad 25 added from the footprint"+        ],+        "pages_sent": 48,+        "cost_usd": 0.4906,+        "at": "2026-09-25T13:53:42"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603384185638182912",+        "pages": 48,+        "sha256": "fc650de4293fb2b1",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 25,+        "described": 25,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file