main
Ray
Initial commit: component/lm5041bmtcx
30d63f2
LM5041BMTCX
Texas Instruments · DC-DC Converters · TSSOP-16
LM5041BMTCX from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input voltage to the start-up regulator operating over 15V to 100V range. |
| 2 | FB | input | Inverting input to the internal error amplifier with 0.75V reference on the non-inverting input. |
| 3 | COMP | output | Internal error amplifier output with active sink capability (10mA max), 5kΩ pull-up, and 0.1µF bypass capacitor requirement. |
| 4 | REF | power_out | Precision 5V regulated reference output (max 10mA current) staying low until VCC UVLO is satisfied. |
| 5 | HD | output | Main buck stage PWM control output with duty cycle clamp ensuring 240ns minimum off-time per cycle. |
| 6 | LD | output | Buck synchronous switch PWM control output providing HD inversion during normal operation. |
| 7 | VCC | power_out | Regulated 9V output from the internal high-voltage start-up regulator. |
| 8 | PUSH | output | Push-pull gate driver output with 1.5A peak capability. |
| 9 | PULL | output | Push-pull gate driver output with 1.5A peak capability. |
| 10 | PGND | power_in | Power ground connection. |
| 11 | AGND | power_in | Analog ground connection. |
| 12 | CS | input | Current sense input to the PWM comparator with 50ns leading edge blanking and 0.5V cycle-by-cycle current limit threshold. |
| 13 | SS | input | Soft-start control input with 10µA internal charge source that forces HD and LD low below 0.45V shutdown threshold. |
| 14 | TIME | input | Push-pull overlap/dead-time control pin with external resistor providing overlap when connected to GND or dead-time when connected to REF. |
| 15 | RT | input | Oscillator frequency timing pin with external resistor that accepts external clock signals (>3V peak, 15-150ns width) for synchronization. |
| 16 | UVLO | input | Line under-voltage lockout pin with external resistor divider setting 2.5V shutdown threshold and 20µA hysteresis current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Power Management (PMIC) |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
LM5041BMTCX - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
lm5041bmtcx-etched.step/lm5041bmtcx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm5041bmtcx.step/lm5041bmtcx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (23 pp, sha256
ac4162222a8569de, retrieved 2026-10-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM5041BMTCX
**Texas Instruments** · DC-DC Converters · TSSOP-16
LM5041BMTCX from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input voltage to the start-up regulator operating over 15V to 100V range. |
| 2 | FB | input | Inverting input to the internal error amplifier with 0.75V reference on the non-inverting input. |
| 3 | COMP | output | Internal error amplifier output with active sink capability (10mA max), 5kΩ pull-up, and 0.1µF bypass capacitor requirement. |
| 4 | REF | power_out | Precision 5V regulated reference output (max 10mA current) staying low until VCC UVLO is satisfied. |
| 5 | HD | output | Main buck stage PWM control output with duty cycle clamp ensuring 240ns minimum off-time per cycle. |
| 6 | LD | output | Buck synchronous switch PWM control output providing HD inversion during normal operation. |
| 7 | VCC | power_out | Regulated 9V output from the internal high-voltage start-up regulator. |
| 8 | PUSH | output | Push-pull gate driver output with 1.5A peak capability. |
| 9 | PULL | output | Push-pull gate driver output with 1.5A peak capability. |
| 10 | PGND | power_in | Power ground connection. |
| 11 | AGND | power_in | Analog ground connection. |
| 12 | CS | input | Current sense input to the PWM comparator with 50ns leading edge blanking and 0.5V cycle-by-cycle current limit threshold. |
| 13 | SS | input | Soft-start control input with 10µA internal charge source that forces HD and LD low below 0.45V shutdown threshold. |
| 14 | TIME | input | Push-pull overlap/dead-time control pin with external resistor providing overlap when connected to GND or dead-time when connected to REF. |
| 15 | RT | input | Oscillator frequency timing pin with external resistor that accepts external clock signals (>3V peak, 15-150ns width) for synchronization. |
| 16 | UVLO | input | Line under-voltage lockout pin with external resistor divider setting 2.5V shutdown threshold and 20µA hysteresis current. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Power Management (PMIC) |
| Pins | 16 |
## CAD (KiCad official)
- Symbol: `LM5041BMTCX`
- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`
- 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files: `lm5041bmtcx-etched.step` / `lm5041bmtcx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm5041bmtcx.step` / `lm5041bmtcx.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm5041b) (23 pp, sha256 `ac4162222a8569de`, retrieved 2026-10-01, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm5041bmtcx-datasheet.pdf)