← Commit history

Initial commit: component/lm5041bmtcx

Ray ·30d63f2041 ·
2 files changed +253
README.mdadded+52
@@ -0,0 +1,52 @@+# LM5041BMTCX++**Texas Instruments** · DC-DC Converters · TSSOP-16++LM5041BMTCX from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VIN | power_in | Input voltage to the start-up regulator operating over 15V to 100V range. |+| 2 | FB | input | Inverting input to the internal error amplifier with 0.75V reference on the non-inverting input. |+| 3 | COMP | output | Internal error amplifier output with active sink capability (10mA max), 5kΩ pull-up, and 0.1µF bypass capacitor requirement. |+| 4 | REF | power_out | Precision 5V regulated reference output (max 10mA current) staying low until VCC UVLO is satisfied. |+| 5 | HD | output | Main buck stage PWM control output with duty cycle clamp ensuring 240ns minimum off-time per cycle. |+| 6 | LD | output | Buck synchronous switch PWM control output providing HD inversion during normal operation. |+| 7 | VCC | power_out | Regulated 9V output from the internal high-voltage start-up regulator. |+| 8 | PUSH | output | Push-pull gate driver output with 1.5A peak capability. |+| 9 | PULL | output | Push-pull gate driver output with 1.5A peak capability. |+| 10 | PGND | power_in | Power ground connection. |+| 11 | AGND | power_in | Analog ground connection. |+| 12 | CS | input | Current sense input to the PWM comparator with 50ns leading edge blanking and 0.5V cycle-by-cycle current limit threshold. |+| 13 | SS | input | Soft-start control input with 10µA internal charge source that forces HD and LD low below 0.45V shutdown threshold. |+| 14 | TIME | input | Push-pull overlap/dead-time control pin with external resistor providing overlap when connected to GND or dead-time when connected to REF. |+| 15 | RT | input | Oscillator frequency timing pin with external resistor that accepts external clock signals (>3V peak, 15-150ns width) for synchronization. |+| 16 | UVLO | input | Line under-voltage lockout pin with external resistor divider setting 2.5V shutdown threshold and 20µA hysteresis current. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-16 |+| Category | Power Management (PMIC) |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `LM5041BMTCX`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16 (KiCad packages3D, STEP)+- 3D model files: `lm5041bmtcx-etched.step` / `lm5041bmtcx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm5041bmtcx.step` / `lm5041bmtcx.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm5041b) (23 pp, sha256 `ac4162222a8569de`, retrieved 2026-10-01, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm5041bmtcx-datasheet.pdf)
page.jsonadded+201
@@ -0,0 +1,201 @@+{+  "slug": "lm5041bmtcx",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments DC-DC Converters, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "lm5041bmtcx",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lm5041bmtcx.kicad_sym",+    "lm5041bmtcx.kicad_mod",+    "lm5041bmtcx.glb",+    "lm5041bmtcx.step",+    "lm5041bmtcx.lbr",+    "docs/hero.png",+    "docs/lm5041bmtcx-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LM5041BMTCX",+    "manufacturer": "Texas Instruments",+    "package": "TSSOP-16",+    "pin_count": 16,+    "category": "Power Management (PMIC)",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/cn/lit/gpn/lm5041b",+    "parts": {+      "symbol": "lm5041bmtcx.kicad_sym",+      "footprint": "lm5041bmtcx.kicad_mod",+      "model_3d": "lm5041bmtcx-etched.glb",+      "model_3d_plain": "lm5041bmtcx.glb",+      "model_3d_step": "lm5041bmtcx-etched.step",+      "model_3d_step_plain": "lm5041bmtcx.step",+      "lbr": "lm5041bmtcx.lbr"+    },+    "distributor_links": {+      "lcsc": "C2658505"+    },+    "distributor_check": {+      "checked_at": "2026-10-01T04:49:29Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": null,+        "status": "no match"+      },+      "mouser": {+        "pn": null,+        "status": "no match"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "VIN",+        "type": "power_in",+        "description": "Input voltage to the start-up regulator operating over 15V to 100V range."+      },+      {+        "number": "2",+        "name": "FB",+        "type": "input",+        "description": "Inverting input to the internal error amplifier with 0.75V reference on the non-inverting input."+      },+      {+        "number": "3",+        "name": "COMP",+        "type": "output",+        "description": "Internal error amplifier output with active sink capability (10mA max), 5kΩ pull-up, and 0.1µF bypass capacitor requirement."+      },+      {+        "number": "4",+        "name": "REF",+        "type": "power_out",+        "description": "Precision 5V regulated reference output (max 10mA current) staying low until VCC UVLO is satisfied."+      },+      {+        "number": "5",+        "name": "HD",+        "type": "output",+        "description": "Main buck stage PWM control output with duty cycle clamp ensuring 240ns minimum off-time per cycle."+      },+      {+        "number": "6",+        "name": "LD",+        "type": "output",+        "description": "Buck synchronous switch PWM control output providing HD inversion during normal operation."+      },+      {+        "number": "7",+        "name": "VCC",+        "type": "power_out",+        "description": "Regulated 9V output from the internal high-voltage start-up regulator."+      },+      {+        "number": "8",+        "name": "PUSH",+        "type": "output",+        "description": "Push-pull gate driver output with 1.5A peak capability."+      },+      {+        "number": "9",+        "name": "PULL",+        "type": "output",+        "description": "Push-pull gate driver output with 1.5A peak capability."+      },+      {+        "number": "10",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground connection."+      },+      {+        "number": "11",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground connection."+      },+      {+        "number": "12",+        "name": "CS",+        "type": "input",+        "description": "Current sense input to the PWM comparator with 50ns leading edge blanking and 0.5V cycle-by-cycle current limit threshold."+      },+      {+        "number": "13",+        "name": "SS",+        "type": "input",+        "description": "Soft-start control input with 10µA internal charge source that forces HD and LD low below 0.45V shutdown threshold."+      },+      {+        "number": "14",+        "name": "TIME",+        "type": "input",+        "description": "Push-pull overlap/dead-time control pin with external resistor providing overlap when connected to GND or dead-time when connected to REF."+      },+      {+        "number": "15",+        "name": "RT",+        "type": "input",+        "description": "Oscillator frequency timing pin with external resistor that accepts external clock signals (>3V peak, 15-150ns width) for synchronization."+      },+      {+        "number": "16",+        "name": "UVLO",+        "type": "input",+        "description": "Line under-voltage lockout pin with external resistor divider setting 2.5V shutdown threshold and 20µA hysteresis current."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 23,+        "cost_usd": 0.152,+        "at": "2026-10-01T04:49:13"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/lm5041b",+        "pages": 23,+        "sha256": "ac4162222a8569de",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file