component
LM5010AMHX
Public Made by Adomby adom
Texas Instruments DC-DC Converters, HTSSOP-14-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/lm5010amhx
34a02bd
LM5010AMHX
Texas Instruments · DC-DC Converters · HTSSOP-14-EP
LM5010AMHX from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connection; can be connected to ground plane to improve heat dissipation. |
| 2 | SW | output | Switching node output internally connected to the buck switch source; connects to inductor, freewheeling diode, and bootstrap capacitor. |
| 3 | BST | input | Bootstrap capacitor pin charged from VCC through an internal diode during the buck switch OFF-time. |
| 4 | ISEN | input | Current sense input where inductor current flows through internal 50 mΩ sense resistor with 1.25 A typical threshold for current limiting. |
| 5 | SGND | power_in | Sense ground where recirculating inductor current flows into this pin through the internal sense resistor. |
| 6 | RTN | power_in | Circuit ground return for all internal circuitry other than the current sense resistor. |
| 7 | NC | unconnected | No connection; can be connected to ground plane to improve heat dissipation. |
| 8 | NC | unconnected | No connection; can be connected to ground plane to improve heat dissipation. |
| 9 | FB | input | Voltage feedback input to regulation and overvoltage comparators with 2.5 V regulation level and 2.9 V overvoltage threshold. |
| 10 | SS | input | Soft-start pin charged by an internal 11.5 µA current source to 2.5 V for gradual output voltage ramp during startup. |
| 11 | RON/SD | input | ON-time control and shutdown pin where external resistor from VIN to this pin sets buck switch ON-time; grounding shuts down regulator. |
| 12 | VCC | power_out | Bias regulator output nominally equal to VIN for VIN < 8.9 V and regulated at 7 V for VIN > 8.9 V; requires 0.47 µF minimum bypass capacitor. |
| 13 | VIN | power_in | Input supply pin with nominal range 6 V to 75 V; input bypass capacitors must be located as close as possible to VIN and RTN pins. |
| 14 | NC | unconnected | No connection; can be connected to ground plane to improve heat dissipation. |
| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-14-EP |
| Category | Power Management (PMIC) |
| Pins | 15 |
CAD (KiCad official)
- Symbol:
LM5010AMHX - Footprint:
Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm - 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)
- 3D model files:
lm5010amhx-etched.step/lm5010amhx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm5010amhx.step/lm5010amhx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (36 pp, sha256
1f25e7679e7d28d0, retrieved 2026-09-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM5010AMHX
**Texas Instruments** · DC-DC Converters · HTSSOP-14-EP
LM5010AMHX from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connection; can be connected to ground plane to improve heat dissipation. |
| 2 | SW | output | Switching node output internally connected to the buck switch source; connects to inductor, freewheeling diode, and bootstrap capacitor. |
| 3 | BST | input | Bootstrap capacitor pin charged from VCC through an internal diode during the buck switch OFF-time. |
| 4 | ISEN | input | Current sense input where inductor current flows through internal 50 mΩ sense resistor with 1.25 A typical threshold for current limiting. |
| 5 | SGND | power_in | Sense ground where recirculating inductor current flows into this pin through the internal sense resistor. |
| 6 | RTN | power_in | Circuit ground return for all internal circuitry other than the current sense resistor. |
| 7 | NC | unconnected | No connection; can be connected to ground plane to improve heat dissipation. |
| 8 | NC | unconnected | No connection; can be connected to ground plane to improve heat dissipation. |
| 9 | FB | input | Voltage feedback input to regulation and overvoltage comparators with 2.5 V regulation level and 2.9 V overvoltage threshold. |
| 10 | SS | input | Soft-start pin charged by an internal 11.5 µA current source to 2.5 V for gradual output voltage ramp during startup. |
| 11 | RON/SD | input | ON-time control and shutdown pin where external resistor from VIN to this pin sets buck switch ON-time; grounding shuts down regulator. |
| 12 | VCC | power_out | Bias regulator output nominally equal to VIN for VIN < 8.9 V and regulated at 7 V for VIN > 8.9 V; requires 0.47 µF minimum bypass capacitor. |
| 13 | VIN | power_in | Input supply pin with nominal range 6 V to 75 V; input bypass capacitors must be located as close as possible to VIN and RTN pins. |
| 14 | NC | unconnected | No connection; can be connected to ground plane to improve heat dissipation. |
| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-14-EP |
| Category | Power Management (PMIC) |
| Pins | 15 |
## CAD (KiCad official)
- Symbol: `LM5010AMHX`
- Footprint: `Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm`
- 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)
- 3D model files: `lm5010amhx-etched.step` / `lm5010amhx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm5010amhx.step` / `lm5010amhx.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm5010a) (36 pp, sha256 `1f25e7679e7d28d0`, retrieved 2026-09-22, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm5010amhx-datasheet.pdf)