← Commit history

Initial commit: component/lm5010amhx

Ray ·34a02bdf86 ·
2 files changed +237
README.mdadded+51
@@ -0,0 +1,51 @@+# LM5010AMHX++**Texas Instruments** · DC-DC Converters · HTSSOP-14-EP++LM5010AMHX from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | NC | unconnected | No connection; can be connected to ground plane to improve heat dissipation. |+| 2 | SW | output | Switching node output internally connected to the buck switch source; connects to inductor, freewheeling diode, and bootstrap capacitor. |+| 3 | BST | input | Bootstrap capacitor pin charged from VCC through an internal diode during the buck switch OFF-time. |+| 4 | ISEN | input | Current sense input where inductor current flows through internal 50 mΩ sense resistor with 1.25 A typical threshold for current limiting. |+| 5 | SGND | power_in | Sense ground where recirculating inductor current flows into this pin through the internal sense resistor. |+| 6 | RTN | power_in | Circuit ground return for all internal circuitry other than the current sense resistor. |+| 7 | NC | unconnected | No connection; can be connected to ground plane to improve heat dissipation. |+| 8 | NC | unconnected | No connection; can be connected to ground plane to improve heat dissipation. |+| 9 | FB | input | Voltage feedback input to regulation and overvoltage comparators with 2.5 V regulation level and 2.9 V overvoltage threshold. |+| 10 | SS | input | Soft-start pin charged by an internal 11.5 µA current source to 2.5 V for gradual output voltage ramp during startup. |+| 11 | RON/SD | input | ON-time control and shutdown pin where external resistor from VIN to this pin sets buck switch ON-time; grounding shuts down regulator. |+| 12 | VCC | power_out | Bias regulator output nominally equal to VIN for VIN < 8.9 V and regulated at 7 V for VIN > 8.9 V; requires 0.47 µF minimum bypass capacitor. |+| 13 | VIN | power_in | Input supply pin with nominal range 6 V to 75 V; input bypass capacitors must be located as close as possible to VIN and RTN pins. |+| 14 | NC | unconnected | No connection; can be connected to ground plane to improve heat dissipation. |+| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-14-EP |+| Category | Power Management (PMIC) |+| Pins | 15 |++## CAD (KiCad official)++- Symbol: `LM5010AMHX`+- Footprint: `Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm`+- 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)+- 3D model files: `lm5010amhx-etched.step` / `lm5010amhx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm5010amhx.step` / `lm5010amhx.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm5010a) (36 pp, sha256 `1f25e7679e7d28d0`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm5010amhx-datasheet.pdf)
page.jsonadded+186
@@ -0,0 +1,186 @@+{+  "slug": "lm5010amhx",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments DC-DC Converters, HTSSOP-14-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "lm5010amhx",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lm5010amhx.kicad_sym",+    "lm5010amhx.kicad_mod",+    "lm5010amhx.glb",+    "lm5010amhx.step",+    "lm5010amhx.lbr",+    "docs/hero.png",+    "docs/lm5010amhx-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LM5010AMHX",+    "manufacturer": "Texas Instruments",+    "package": "HTSSOP-14-EP",+    "pin_count": 15,+    "category": "Power Management (PMIC)",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/cn/lit/gpn/lm5010a",+    "parts": {+      "symbol": "lm5010amhx.kicad_sym",+      "footprint": "lm5010amhx.kicad_mod",+      "model_3d": "lm5010amhx-etched.glb",+      "model_3d_plain": "lm5010amhx.glb",+      "model_3d_step": "lm5010amhx-etched.step",+      "model_3d_step_plain": "lm5010amhx.step",+      "lbr": "lm5010amhx.lbr"+    },+    "distributor_links": {+      "lcsc": "C412829"+    },+    "pins": [+      {+        "number": "1",+        "name": "NC",+        "type": "unconnected",+        "description": "No connection; can be connected to ground plane to improve heat dissipation."+      },+      {+        "number": "2",+        "name": "SW",+        "type": "output",+        "description": "Switching node output internally connected to the buck switch source; connects to inductor, freewheeling diode, and bootstrap capacitor."+      },+      {+        "number": "3",+        "name": "BST",+        "type": "input",+        "description": "Bootstrap capacitor pin charged from VCC through an internal diode during the buck switch OFF-time."+      },+      {+        "number": "4",+        "name": "ISEN",+        "type": "input",+        "description": "Current sense input where inductor current flows through internal 50 mΩ sense resistor with 1.25 A typical threshold for current limiting."+      },+      {+        "number": "5",+        "name": "SGND",+        "type": "power_in",+        "description": "Sense ground where recirculating inductor current flows into this pin through the internal sense resistor."+      },+      {+        "number": "6",+        "name": "RTN",+        "type": "power_in",+        "description": "Circuit ground return for all internal circuitry other than the current sense resistor."+      },+      {+        "number": "7",+        "name": "NC",+        "type": "unconnected",+        "description": "No connection; can be connected to ground plane to improve heat dissipation."+      },+      {+        "number": "8",+        "name": "NC",+        "type": "unconnected",+        "description": "No connection; can be connected to ground plane to improve heat dissipation."+      },+      {+        "number": "9",+        "name": "FB",+        "type": "input",+        "description": "Voltage feedback input to regulation and overvoltage comparators with 2.5 V regulation level and 2.9 V overvoltage threshold."+      },+      {+        "number": "10",+        "name": "SS",+        "type": "input",+        "description": "Soft-start pin charged by an internal 11.5 µA current source to 2.5 V for gradual output voltage ramp during startup."+      },+      {+        "number": "11",+        "name": "RON/SD",+        "type": "input",+        "description": "ON-time control and shutdown pin where external resistor from VIN to this pin sets buck switch ON-time; grounding shuts down regulator."+      },+      {+        "number": "12",+        "name": "VCC",+        "type": "power_out",+        "description": "Bias regulator output nominally equal to VIN for VIN < 8.9 V and regulated at 7 V for VIN > 8.9 V; requires 0.47 µF minimum bypass capacitor."+      },+      {+        "number": "13",+        "name": "VIN",+        "type": "power_in",+        "description": "Input supply pin with nominal range 6 V to 75 V; input bypass capacitors must be located as close as possible to VIN and RTN pins."+      },+      {+        "number": "14",+        "name": "NC",+        "type": "unconnected",+        "description": "No connection; can be connected to ground plane to improve heat dissipation."+      },+      {+        "number": "15",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 15 added from the footprint",+          "dropped thermal pad ['EP'] absent from footprint"+        ],+        "pages_sent": 36,+        "cost_usd": 0.4925,+        "at": "2026-09-22T22:36:26"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/lm5010a",+        "pages": 36,+        "sha256": "1f25e7679e7d28d0",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 15,+        "described": 15,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file