main
Ray lm25141qrgerq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 213d90f
{
  "schema_version": 1,
  "type": "component",
  "slug": "lm25141qrgerq1",
  "title": "LM25141QRGERQ1",
  "brief": "Texas Instruments DC-DC Converters, VQFN-24(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "lm25141qrgerq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "LM25141QRGERQ1",
    "manufacturer": "Texas Instruments",
    "package": "VQFN-24(4x4)",
    "pin_count": 25,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lm25141-q1",
    "parts": {
      "symbol": "lm25141qrgerq1.kicad_sym",
      "footprint": "lm25141qrgerq1.kicad_mod",
      "model_3d": "lm25141qrgerq1-etched.glb",
      "model_3d_plain": "lm25141qrgerq1.glb",
      "model_3d_step": "lm25141qrgerq1-etched.step",
      "model_3d_step_plain": "lm25141qrgerq1.step",
      "lbr": "lm25141qrgerq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C3198174"
    },
    "pins": [
      {
        "number": "1",
        "name": "DEMB",
        "type": "input",
        "description": "Diode emulation pin; connect to AGND to enable diode emulation or to VDDA for Forced PWM mode; can also synchronize internal oscillator to external clock in 350-550 kHz (440 kHz mode) or 1.8-2.6 MHz range (2.2 MHz mode)."
      },
      {
        "number": "2",
        "name": "VDDA",
        "type": "power_out",
        "description": "Internal analog bias regulator output (typ. 5 V, UVLO 3.2 V); requires ceramic bypass capacitor (≥100 nF) from VDDA to AGND."
      },
      {
        "number": "3",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground connection and return for internal voltage reference and analog circuits; connect exposed thermal pad to AGND and PGND."
      },
      {
        "number": "4",
        "name": "RT",
        "type": "input",
        "description": "Oscillator frequency trim pin; resistor to ground shifts frequency from 2.2 MHz (1.8-2.53 MHz range) or 440 kHz (300-500 kHz range), or apply analog voltage (0-0.6 V) through resistor to modulate frequency."
      },
      {
        "number": "5",
        "name": "DITH",
        "type": "output",
        "description": "Dither/frequency modulation output; capacitor to AGND charged/discharged by internal 20-µA source creates triangular waveform (1.14-1.26 V) modulating oscillator ±5%; disabled by connecting to VDDA."
      },
      {
        "number": "6",
        "name": "OSC",
        "type": "input",
        "description": "Oscillator frequency selection pin; connect to VDDA for 2.2 MHz operation (2.1-2.3 kHz typ.) or to AGND for 440 kHz operation (420-460 kHz typ.); latched during VCC power-up."
      },
      {
        "number": "7",
        "name": "LOL",
        "type": "output",
        "description": "Low-side gate driver turnoff output (pulldown); drives low-side MOSFET gate with 100 mA sink current, 0.05 V low output, <3 ns fall time."
      },
      {
        "number": "8",
        "name": "LO",
        "type": "output",
        "description": "Low-side gate driver turnon output (pullup); drives low-side MOSFET gate with 3.25 A source current, 0.07 V high output, <4 ns rise time."
      },
      {
        "number": "9",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground connection for low-side NMOS gate driver; must connect to PCB power ground plane; PGND to AGND voltage range -0.3 to +0.3 V."
      },
      {
        "number": "10",
        "name": "VCC",
        "type": "power_out",
        "description": "VCC bias supply output (nom. 5 V, range 4.75-5.25 V, UVLO 3.4 V); requires 2.2-4.7 µF bypass capacitor to PGND with 75 mA source current limit."
      },
      {
        "number": "11",
        "name": "HB",
        "type": "power_out",
        "description": "High-side bootstrap supply pin (0-5.25 V from SW); external bootstrap capacitor (0.1-0.47 µF ceramic, low-ESR) charged through bootstrap diode from VCC when SW low; UVLO threshold 2.5 V."
      },
      {
        "number": "12",
        "name": "SW",
        "type": "passive",
        "description": "Switching node connection of buck regulator; connects to high-side MOSFET source, low-side MOSFET drain, and bootstrap capacitor between SW and HB; operates between GND and VIN (-0.3 to +47 V absolute maximum)."
      },
      {
        "number": "13",
        "name": "HO",
        "type": "output",
        "description": "High-side gate driver turnon output (pullup relative to SW); drives high-side MOSFET gate with 3.25 A peak source current, 0.07 V high output, <4 ns rise time."
      },
      {
        "number": "14",
        "name": "HOL",
        "type": "output",
        "description": "High-side gate driver turnoff output (pulldown from HB to SW); pulls high-side gate low with 4.25 A peak sink current, 0.05 V low output, <3 ns fall time."
      },
      {
        "number": "15",
        "name": "VIN",
        "type": "power_in",
        "description": "Supply voltage input (3.8-42 V steady-state, 47 V absolute maximum including transients); input to internal VCC regulator; requires high-quality bypass capacitor to minimize ringing."
      },
      {
        "number": "16",
        "name": "VCCX",
        "type": "power_in",
        "description": "Optional external bias supply input (0-6.5 V); if VCCX >4.5 V, internally connected to VCC and internal regulator disabled; must be grounded to PGND if unused."
      },
      {
        "number": "17",
        "name": "VOUT",
        "type": "input",
        "description": "Current sense amplifier noninverting input (1.5-15 V); connect to output side of external current sense resistor with low impedance Kelvin connection for <40 ns amplifier delay."
      },
      {
        "number": "18",
        "name": "CS",
        "type": "input",
        "description": "Current sense amplifier inverting input; make low-current Kelvin connection to inductor side of external current sense resistor; 75 mV threshold (±0.9%) for cycle-by-cycle current limit with 12 V/V gain."
      },
      {
        "number": "19",
        "name": "FB",
        "type": "input",
        "description": "Feedback voltage pin; connect to VDDA for fixed 3.3-V output (3.273-3.327 V), to AGND for fixed 5-V output (4.96-5.04 V), or to resistor divider for adjustable 1.5-15 V output with 1.2 V regulation threshold."
      },
      {
        "number": "20",
        "name": "COMP",
        "type": "input",
        "description": "Compensation amplifier output pin for external error amplifier feedback network; transconductance amplifier input with 1200 µS typical gain and 1 V full-scale input range."
      },
      {
        "number": "21",
        "name": "PG",
        "type": "output",
        "description": "Power good open-collector output; switches low (<0.4 V at 2 mA sink) when VOUT falls below 92% or rises above 110% of regulation voltage with 25-µs overvoltage and 30-µs undervoltage filter delays."
      },
      {
        "number": "22",
        "name": "SS",
        "type": "input",
        "description": "Soft-start programming pin; external capacitor and internal 20-µA current source control error amplifier ramp rate during startup; pulling below 80 mV disables gate driver outputs while maintaining other functions."
      },
      {
        "number": "23",
        "name": "EN",
        "type": "input",
        "description": "Active-high logic enable input (0-47 V range); controller enabled when >2 V, shutdown mode (<10 µA IQ) when <0.8 V; logic input leakage <1 µA."
      },
      {
        "number": "24",
        "name": "RES",
        "type": "output",
        "description": "Hiccup restart timer pin; external capacitor (20-µA source current, 1.2 V threshold, 4 Ω pulldown) sets recovery delay after 512 consecutive current-limit cycles; grounding to VDD during power-up disables hiccup protection."
      },
      {
        "number": "25",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: PIN 12 (SW) does not have an explicit TYPE designation in the datasheet pin functions table; classif; PIN 11 (HB) is a bootstrap supply connection with special handling; it transitions dynamically betwe",
          "exposed pad 25 added from the footprint"
        ],
        "pages_sent": 55,
        "cost_usd": 0.5694,
        "at": "2026-09-23T15:15:01"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lm25141-q1",
        "pages": 55,
        "sha256": "4e8600680b2accdb",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 25,
        "described": 25,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm25141qrgerq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          4,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "096fc110543e6d324c5120c2d38e3dca87a389da9b6fac234f1fe40856295ef4",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm25141qrgerq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          4,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "983c5551843f31f1e58c339a434f1a81055420bb4aee2cbb56e6d7d7154c8dca",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "VQFN-24(4x4)",
      "Category": "Power Management (PMIC)",
      "Pins": "25"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "lm25141qrgerq1"
  ],
  "discovery_pitch": "LM25141QRGERQ1 (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm25141qrgerq1.kicad_sym",
    "lm25141qrgerq1.kicad_mod",
    "lm25141qrgerq1.glb",
    "lm25141qrgerq1.step",
    "lm25141qrgerq1.lbr",
    "docs/hero.png",
    "docs/lm25141qrgerq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-25T00:08:25.225Z"
}