component
LM25141QRGERQ1
Public Made by Adomby adom
Texas Instruments DC-DC Converters, VQFN-24(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
lm25141qrgerq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
213d90f
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280
{
"slug": "lm25141qrgerq1",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments DC-DC Converters, VQFN-24(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power management (pmic)",
"lm25141qrgerq1",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lm25141qrgerq1.kicad_sym",
"lm25141qrgerq1.kicad_mod",
"lm25141qrgerq1.glb",
"lm25141qrgerq1.step",
"lm25141qrgerq1.lbr",
"docs/hero.png",
"docs/lm25141qrgerq1-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"component": {
"mpn": "LM25141QRGERQ1",
"manufacturer": "Texas Instruments",
"package": "VQFN-24(4x4)",
"pin_count": 25,
"category": "Power Management (PMIC)",
"subcategory": "DC-DC Converters",
"datasheet": "https://www.ti.com/cn/lit/gpn/lm25141-q1",
"parts": {
"symbol": "lm25141qrgerq1.kicad_sym",
"footprint": "lm25141qrgerq1.kicad_mod",
"model_3d": "lm25141qrgerq1-etched.glb",
"model_3d_plain": "lm25141qrgerq1.glb",
"model_3d_step": "lm25141qrgerq1-etched.step",
"model_3d_step_plain": "lm25141qrgerq1.step",
"lbr": "lm25141qrgerq1.lbr"
},
"distributor_links": {
"lcsc": "C3198174"
},
"pins": [
{
"number": "1",
"name": "DEMB",
"type": "input",
"description": "Diode emulation pin; connect to AGND to enable diode emulation or to VDDA for Forced PWM mode; can also synchronize internal oscillator to external clock in 350-550 kHz (440 kHz mode) or 1.8-2.6 MHz range (2.2 MHz mode)."
},
{
"number": "2",
"name": "VDDA",
"type": "power_out",
"description": "Internal analog bias regulator output (typ. 5 V, UVLO 3.2 V); requires ceramic bypass capacitor (≥100 nF) from VDDA to AGND."
},
{
"number": "3",
"name": "AGND",
"type": "power_in",
"description": "Analog ground connection and return for internal voltage reference and analog circuits; connect exposed thermal pad to AGND and PGND."
},
{
"number": "4",
"name": "RT",
"type": "input",
"description": "Oscillator frequency trim pin; resistor to ground shifts frequency from 2.2 MHz (1.8-2.53 MHz range) or 440 kHz (300-500 kHz range), or apply analog voltage (0-0.6 V) through resistor to modulate frequency."
},
{
"number": "5",
"name": "DITH",
"type": "output",
"description": "Dither/frequency modulation output; capacitor to AGND charged/discharged by internal 20-µA source creates triangular waveform (1.14-1.26 V) modulating oscillator ±5%; disabled by connecting to VDDA."
},
{
"number": "6",
"name": "OSC",
"type": "input",
"description": "Oscillator frequency selection pin; connect to VDDA for 2.2 MHz operation (2.1-2.3 kHz typ.) or to AGND for 440 kHz operation (420-460 kHz typ.); latched during VCC power-up."
},
{
"number": "7",
"name": "LOL",
"type": "output",
"description": "Low-side gate driver turnoff output (pulldown); drives low-side MOSFET gate with 100 mA sink current, 0.05 V low output, <3 ns fall time."
},
{
"number": "8",
"name": "LO",
"type": "output",
"description": "Low-side gate driver turnon output (pullup); drives low-side MOSFET gate with 3.25 A source current, 0.07 V high output, <4 ns rise time."
},
{
"number": "9",
"name": "PGND",
"type": "power_in",
"description": "Power ground connection for low-side NMOS gate driver; must connect to PCB power ground plane; PGND to AGND voltage range -0.3 to +0.3 V."
},
{
"number": "10",
"name": "VCC",
"type": "power_out",
"description": "VCC bias supply output (nom. 5 V, range 4.75-5.25 V, UVLO 3.4 V); requires 2.2-4.7 µF bypass capacitor to PGND with 75 mA source current limit."
},
{
"number": "11",
"name": "HB",
"type": "power_out",
"description": "High-side bootstrap supply pin (0-5.25 V from SW); external bootstrap capacitor (0.1-0.47 µF ceramic, low-ESR) charged through bootstrap diode from VCC when SW low; UVLO threshold 2.5 V."
},
{
"number": "12",
"name": "SW",
"type": "passive",
"description": "Switching node connection of buck regulator; connects to high-side MOSFET source, low-side MOSFET drain, and bootstrap capacitor between SW and HB; operates between GND and VIN (-0.3 to +47 V absolute maximum)."
},
{
"number": "13",
"name": "HO",
"type": "output",
"description": "High-side gate driver turnon output (pullup relative to SW); drives high-side MOSFET gate with 3.25 A peak source current, 0.07 V high output, <4 ns rise time."
},
{
"number": "14",
"name": "HOL",
"type": "output",
"description": "High-side gate driver turnoff output (pulldown from HB to SW); pulls high-side gate low with 4.25 A peak sink current, 0.05 V low output, <3 ns fall time."
},
{
"number": "15",
"name": "VIN",
"type": "power_in",
"description": "Supply voltage input (3.8-42 V steady-state, 47 V absolute maximum including transients); input to internal VCC regulator; requires high-quality bypass capacitor to minimize ringing."
},
{
"number": "16",
"name": "VCCX",
"type": "power_in",
"description": "Optional external bias supply input (0-6.5 V); if VCCX >4.5 V, internally connected to VCC and internal regulator disabled; must be grounded to PGND if unused."
},
{
"number": "17",
"name": "VOUT",
"type": "input",
"description": "Current sense amplifier noninverting input (1.5-15 V); connect to output side of external current sense resistor with low impedance Kelvin connection for <40 ns amplifier delay."
},
{
"number": "18",
"name": "CS",
"type": "input",
"description": "Current sense amplifier inverting input; make low-current Kelvin connection to inductor side of external current sense resistor; 75 mV threshold (±0.9%) for cycle-by-cycle current limit with 12 V/V gain."
},
{
"number": "19",
"name": "FB",
"type": "input",
"description": "Feedback voltage pin; connect to VDDA for fixed 3.3-V output (3.273-3.327 V), to AGND for fixed 5-V output (4.96-5.04 V), or to resistor divider for adjustable 1.5-15 V output with 1.2 V regulation threshold."
},
{
"number": "20",
"name": "COMP",
"type": "input",
"description": "Compensation amplifier output pin for external error amplifier feedback network; transconductance amplifier input with 1200 µS typical gain and 1 V full-scale input range."
},
{
"number": "21",
"name": "PG",
"type": "output",
"description": "Power good open-collector output; switches low (<0.4 V at 2 mA sink) when VOUT falls below 92% or rises above 110% of regulation voltage with 25-µs overvoltage and 30-µs undervoltage filter delays."
},
{
"number": "22",
"name": "SS",
"type": "input",
"description": "Soft-start programming pin; external capacitor and internal 20-µA current source control error amplifier ramp rate during startup; pulling below 80 mV disables gate driver outputs while maintaining other functions."
},
{
"number": "23",
"name": "EN",
"type": "input",
"description": "Active-high logic enable input (0-47 V range); controller enabled when >2 V, shutdown mode (<10 µA IQ) when <0.8 V; logic input leakage <1 µA."
},
{
"number": "24",
"name": "RES",
"type": "output",
"description": "Hiccup restart timer pin; external capacitor (20-µA source current, 1.2 V threshold, 4 Ω pulldown) sets recovery delay after 512 consecutive current-limit cycles; grounding to VDD during power-up disables hiccup protection."
},
{
"number": "25",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.2",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.2",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: PIN 12 (SW) does not have an explicit TYPE designation in the datasheet pin functions table; classif; PIN 11 (HB) is a bootstrap supply connection with special handling; it transitions dynamically betwe",
"exposed pad 25 added from the footprint"
],
"pages_sent": 55,
"cost_usd": 0.5694,
"at": "2026-09-23T15:15:01"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/lm25141-q1",
"pages": 55,
"sha256": "4e8600680b2accdb",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 25,
"described": 25,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lm25141qrgerq1.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.0,
4.0,
0.77
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "096fc110543e6d324c5120c2d38e3dca87a389da9b6fac234f1fe40856295ef4",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lm25141qrgerq1-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.0,
4.0,
0.77
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "983c5551843f31f1e58c339a434f1a81055420bb4aee2cbb56e6d7d7154c8dca",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}