main
History Download
Ray lm211p: specified limits as data (metadata.characteristics, 37 rows from the datasheet) d2829e4

LM211P

Texas Instruments · Comparators · PDIP-8

LM211P from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EMIT OUT output Open collector emitter output with isolated emitter from VCC− and maximum 30 V rating.
2 IN+ input Noninverting input for differential voltage comparison with common-mode range −14.7 V to 13.8 V.
3 IN− input Inverting input for differential voltage comparison with common-mode range −14.7 V to 13.8 V.
4 VCC− power_in Negative supply voltage connection for operation with 3.5 V to 30 V total supply relative to VCC+.
5 BALANCE input Balance adjustment input for offset voltage trimming; leave open or connect to VCC+ when not used.
6 BAL/STRB input Strobe control input to disable output; requires −3 mA to −5 mA current drive or open/VCC+ connection when not used.
7 COL OUT output Open collector output with maximum 50 V rating; produces 0.75 to 1.5 V collector-to-emitter voltage at 50 mA load.
8 VCC+ power_in Positive supply voltage connection for operation with 3.5 V to 30 V total supply relative to VCC−.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package PDIP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (positive, absolute maximum) VCC+ 18 V 4
Supply voltage (negative, absolute maximum) VCC– -18 V 4
Supply voltage VCC+ – VCC– (absolute maximum) VCC+ – VCC– 36 V 4
Differential input voltage VID -30 30 V 4
Input voltage (either input) VI -15 15 V 4
Voltage from emitter output to VCC– 30 V 4
Voltage from collector output to VCC– (LM211) 50 V LM211 4
Duration of output short circuit to ground 10 s 4
Operating virtual-junction temperature TJ 150 °C 4
Lead temperature (1,6 mm from case, 60 s) 260 °C D, P, PS, or PW package 4
Storage temperature Tstg -65 150 °C 4
Electrostatic discharge, human body model (HBM) V(ESD) -500 500 V ANSI/ESDA/JEDEC JS-001 4
Electrostatic discharge, charged-device model (CDM) V(ESD) -750 750 V JESD22-C101 4
Supply voltage VCC+ – VCC– VCC+ – VCC– 3.5 30 V 4
Operating free-air temperature range (LM211) TA -40 85 °C LM211 4
Input offset voltage VIO 2 7.5 mV See (3), 25°C 6
Input offset voltage VIO 10 mV Full range 6
Input offset current IIO 6 50 nA See (3), 25°C 6
Input offset current IIO 70 nA Full range 6
Input bias current IIB 100 250 nA 1 V ≤ VO ≤ 14 V, 25°C 6
Input bias current IIB 300 nA 1 V ≤ VO ≤ 14 V, Full range 6
Low-level strobe current IIL(S) -3 mA V(strobe) = 0.3 V, VID ≤ –10 mV, 25°C 6
Common-mode input-voltage range (lower range) VICR -14.7 -14.5 V Lower range, full range 6
Common-mode input-voltage range (upper range) VICR 13 13.8 V Upper range, full range 6
Large-signal differential-voltage amplification AVD 40 200 V/mV 5 V ≤ VO ≤ 35 V, RL = 1 kΩ, 25°C 6
High-level (collector) output leakage current IOH 0.2 10 nA I(strobe) = –3 mA, VID = 5 mV, VOH = 35 V, 25°C 6
High-level (collector) output leakage current IOH 0.5 μA I(strobe) = –3 mA, VID = 5 mV, VOH = 35 V, Full range 6
High-level (collector) output leakage current IOH 0.2 50 nA VID = 5 mV, VOH = 35 V, 25°C 6
Low-level (collector-to-emitter) output voltage VOL 0.75 1.5 V IOL = 50 mA, VID = –5 mV, 25°C 6
Low-level (collector-to-emitter) output voltage VOL 0.23 0.4 V VCC+ = 4.5 V, VCC– = 0 V, IOL = 8 mA, VID = –6 mV, Full range 6
Supply current from VCC+ (output low) ICC+ 5.1 7.5 mA VID = –10 mV, No load, 25°C 6
Supply current from VCC– (output high) ICC– -4.1 -5 mA VID = 10 mV, No load, 25°C 6
Junction-to-ambient thermal resistance (P, PDIP-8) RθJA 57.5 °C/W P (PDIP) 8-pin package 5
Junction-to-case (top) thermal resistance (P, PDIP-8) RθJC(top) 47.3 °C/W P (PDIP) 8-pin package 5
Junction-to-board thermal resistance (P, PDIP-8) RθJB 34.6 °C/W P (PDIP) 8-pin package 5
Junction-to-top characterization parameter (P, PDIP-8) ψJT 24.9 °C/W P (PDIP) 8-pin package 5
Junction-to-board characterization parameter (P, PDIP-8) ψJB 34.5 °C/W P (PDIP) 8-pin package 5

CAD (KiCad official)

  • Symbol: LM211P
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: PDIP-8 (KiCad packages3D, STEP)
  • 3D model files: lm211p-etched.step / lm211p-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm211p.step / lm211p.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (42 pp, sha256 1877bb45737cb7e8, retrieved 2026-09-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF