Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | |
| viewers | |
| lm211p-etched.fit.json | |
| lm211p-etched.glb | |
| lm211p-etched.step | |
| lm211p.glb | |
| lm211p.kicad_mod | |
| lm211p.kicad_sym | |
| lm211p.lbr | |
| lm211p.step | |
| package.json | |
| page.json | |
| README.md |
LM211P
Texas Instruments · Comparators · PDIP-8
LM211P from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EMIT OUT | output | Open collector emitter output with isolated emitter from VCC− and maximum 30 V rating. |
| 2 | IN+ | input | Noninverting input for differential voltage comparison with common-mode range −14.7 V to 13.8 V. |
| 3 | IN− | input | Inverting input for differential voltage comparison with common-mode range −14.7 V to 13.8 V. |
| 4 | VCC− | power_in | Negative supply voltage connection for operation with 3.5 V to 30 V total supply relative to VCC+. |
| 5 | BALANCE | input | Balance adjustment input for offset voltage trimming; leave open or connect to VCC+ when not used. |
| 6 | BAL/STRB | input | Strobe control input to disable output; requires −3 mA to −5 mA current drive or open/VCC+ connection when not used. |
| 7 | COL OUT | output | Open collector output with maximum 50 V rating; produces 0.75 to 1.5 V collector-to-emitter voltage at 50 mA load. |
| 8 | VCC+ | power_in | Positive supply voltage connection for operation with 3.5 V to 30 V total supply relative to VCC−. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (positive, absolute maximum) | VCC+ | 18 | V | 4 | |||
| Supply voltage (negative, absolute maximum) | VCC– | -18 | V | 4 | |||
| Supply voltage VCC+ – VCC– (absolute maximum) | VCC+ – VCC– | 36 | V | 4 | |||
| Differential input voltage | VID | -30 | 30 | V | 4 | ||
| Input voltage (either input) | VI | -15 | 15 | V | 4 | ||
| Voltage from emitter output to VCC– | 30 | V | 4 | ||||
| Voltage from collector output to VCC– (LM211) | 50 | V | LM211 | 4 | |||
| Duration of output short circuit to ground | 10 | s | 4 | ||||
| Operating virtual-junction temperature | TJ | 150 | °C | 4 | |||
| Lead temperature (1,6 mm from case, 60 s) | 260 | °C | D, P, PS, or PW package | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Electrostatic discharge, human body model (HBM) | V(ESD) | -500 | 500 | V | ANSI/ESDA/JEDEC JS-001 | 4 | |
| Electrostatic discharge, charged-device model (CDM) | V(ESD) | -750 | 750 | V | JESD22-C101 | 4 | |
| Supply voltage VCC+ – VCC– | VCC+ – VCC– | 3.5 | 30 | V | 4 | ||
| Operating free-air temperature range (LM211) | TA | -40 | 85 | °C | LM211 | 4 | |
| Input offset voltage | VIO | 2 | 7.5 | mV | See (3), 25°C | 6 | |
| Input offset voltage | VIO | 10 | mV | Full range | 6 | ||
| Input offset current | IIO | 6 | 50 | nA | See (3), 25°C | 6 | |
| Input offset current | IIO | 70 | nA | Full range | 6 | ||
| Input bias current | IIB | 100 | 250 | nA | 1 V ≤ VO ≤ 14 V, 25°C | 6 | |
| Input bias current | IIB | 300 | nA | 1 V ≤ VO ≤ 14 V, Full range | 6 | ||
| Low-level strobe current | IIL(S) | -3 | mA | V(strobe) = 0.3 V, VID ≤ –10 mV, 25°C | 6 | ||
| Common-mode input-voltage range (lower range) | VICR | -14.7 | -14.5 | V | Lower range, full range | 6 | |
| Common-mode input-voltage range (upper range) | VICR | 13 | 13.8 | V | Upper range, full range | 6 | |
| Large-signal differential-voltage amplification | AVD | 40 | 200 | V/mV | 5 V ≤ VO ≤ 35 V, RL = 1 kΩ, 25°C | 6 | |
| High-level (collector) output leakage current | IOH | 0.2 | 10 | nA | I(strobe) = –3 mA, VID = 5 mV, VOH = 35 V, 25°C | 6 | |
| High-level (collector) output leakage current | IOH | 0.5 | μA | I(strobe) = –3 mA, VID = 5 mV, VOH = 35 V, Full range | 6 | ||
| High-level (collector) output leakage current | IOH | 0.2 | 50 | nA | VID = 5 mV, VOH = 35 V, 25°C | 6 | |
| Low-level (collector-to-emitter) output voltage | VOL | 0.75 | 1.5 | V | IOL = 50 mA, VID = –5 mV, 25°C | 6 | |
| Low-level (collector-to-emitter) output voltage | VOL | 0.23 | 0.4 | V | VCC+ = 4.5 V, VCC– = 0 V, IOL = 8 mA, VID = –6 mV, Full range | 6 | |
| Supply current from VCC+ (output low) | ICC+ | 5.1 | 7.5 | mA | VID = –10 mV, No load, 25°C | 6 | |
| Supply current from VCC– (output high) | ICC– | -4.1 | -5 | mA | VID = 10 mV, No load, 25°C | 6 | |
| Junction-to-ambient thermal resistance (P, PDIP-8) | RθJA | 57.5 | °C/W | P (PDIP) 8-pin package | 5 | ||
| Junction-to-case (top) thermal resistance (P, PDIP-8) | RθJC(top) | 47.3 | °C/W | P (PDIP) 8-pin package | 5 | ||
| Junction-to-board thermal resistance (P, PDIP-8) | RθJB | 34.6 | °C/W | P (PDIP) 8-pin package | 5 | ||
| Junction-to-top characterization parameter (P, PDIP-8) | ψJT | 24.9 | °C/W | P (PDIP) 8-pin package | 5 | ||
| Junction-to-board characterization parameter (P, PDIP-8) | ψJB | 34.5 | °C/W | P (PDIP) 8-pin package | 5 |
CAD (KiCad official)
- Symbol:
LM211P - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
lm211p-etched.step/lm211p-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm211p.step/lm211p.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (42 pp, sha256
1877bb45737cb7e8, retrieved 2026-09-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).