component
LM211P
Public Made by Adomby adom
Texas Instruments Comparators, PDIP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLM211P
Texas Instruments · Comparators · PDIP-8
LM211P from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EMIT OUT | output | Open collector emitter output with isolated emitter from VCC− and maximum 30 V rating. |
| 2 | IN+ | input | Noninverting input for differential voltage comparison with common-mode range −14.7 V to 13.8 V. |
| 3 | IN− | input | Inverting input for differential voltage comparison with common-mode range −14.7 V to 13.8 V. |
| 4 | VCC− | power_in | Negative supply voltage connection for operation with 3.5 V to 30 V total supply relative to VCC+. |
| 5 | BALANCE | input | Balance adjustment input for offset voltage trimming; leave open or connect to VCC+ when not used. |
| 6 | BAL/STRB | input | Strobe control input to disable output; requires −3 mA to −5 mA current drive or open/VCC+ connection when not used. |
| 7 | COL OUT | output | Open collector output with maximum 50 V rating; produces 0.75 to 1.5 V collector-to-emitter voltage at 50 mA load. |
| 8 | VCC+ | power_in | Positive supply voltage connection for operation with 3.5 V to 30 V total supply relative to VCC−. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
LM211P - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
lm211p-etched.step/lm211p-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm211p.step/lm211p.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (42 pp, sha256
1877bb45737cb7e8, retrieved 2026-09-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).