main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lis2hh12tr: viewers rendered from the public page · Ray
lis2hh12tr-etched.glb Publish 0.1.0 · Ray
lis2hh12tr-etched.step lis2hh12tr: factory component page (tier=mfr) · Ray
lis2hh12tr-hero.glb lis2hh12tr: hero GLB from the etched model (keeps the MPN mark) · Ray
lis2hh12tr-hero.overlay.json Publish 0.1.0 · Ray
lis2hh12tr.glb Publish 0.1.0 · Ray
lis2hh12tr.kicad_mod Publish 0.1.0 · Ray
lis2hh12tr.kicad_sym Publish 0.1.0 · Ray
lis2hh12tr.lbr Publish 0.1.0 · Ray
lis2hh12tr.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 12 pins · Ray

LIS2HH12TR

STMicroelectronics · Accelerometers · LGA-12(2x2)

LIS2HH12TR from STMicroelectronics, in a LGA-12(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SCL/SPC input I2C serial clock (SCL) or SPI serial port clock (SPC), which must be pulled up to Vdd_IO through an external resistor when used for I2C.
2 CS input Selects the interface mode: high (1) gives SPI idle mode with I2C enabled, low (0) gives SPI communication with I2C disabled, and it must be tied high to Vdd_IO to use I2C.
3 SDO/SA0 tri_state Serves as the I2C least significant bit of the device address (SA0) or the SPI serial data output (SDO), with the address 0011101b when tied to supply and 0011110b when tied to ground.
4 SDA/SDI/SDO bidirectional Serves as the I2C serial data line (SDA), which must be pulled up to Vdd_IO through an external resistor, or as SPI serial data input (SDI) or 3-wire interface serial data output (SDO).
5 RES passive Reserved pin that must be connected to GND.
6 GND power_in 0 V supply ground pin.
7 GND power_in 0 V supply ground pin.
8 GND power_in 0 V supply ground pin.
9 Vdd power_in Main power supply, with an operational range of 1.71 V to 3.6 V (2.5 V typical calibration point).
10 Vdd_IO power_in Power supply for the I/O pins, from 1.71 V up to Vdd+0.1 V, and it can remain powered while Vdd is removed without blocking the communication buses.
11 INT2 output Interrupt pin 2 output from the sensor's interrupt generator.
12 INT1 output Interrupt pin 1 output from the sensor's interrupt generator.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LGA-12(2x2)
Category Sensors
Pins 12

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Self-test positive difference ST 70 1500 mg OUTPUT(ST2,ST1=01) - OUTPUT(ST2,ST1=00) 10
Operating temperature range Top -40 85 °C 11
Supply voltage Vdd 1.71 2.5 3.6 V 11
I/O pins supply voltage Vdd_IO 1.71 V maximum printed as Vdd+0.1 V 11
Zero-g level offset accuracy TyOff -30 30 mg Typical zero-g level offset accuracy 10
Zero-g level change vs. temperature TCOff -0.25 0.25 mg/°C Delta from 25 °C 10
SPI SPC clock cycle tc(SPC) 100 ns 12
SPI SPC clock frequency fc(SPC) 10 MHz 12
SPI CS setup time tsu(CS) 6 ns 12
SPI CS hold time th(CS) 8 ns 12
SPI SDI input setup time tsu(SI) 5 ns 12
SPI SDI input hold time th(SI) 15 ns 12
SPI SDO valid output time tv(SO) 50 ns 12
SPI SDO output hold time th(SO) 9 ns 12
SPI SDO output disable time tdis(SO) 50 ns 12
SCL clock frequency f(SCL) 0 100 kHz I2C standard mode 13
SCL clock frequency f(SCL) 0 400 kHz I2C fast mode 13
SCL clock low time tw(SCLL) 4.7 µs I2C standard mode 13
SCL clock low time tw(SCLL) 1.3 µs I2C fast mode 13
SCL clock high time tw(SCLH) 4 µs I2C standard mode 13
SCL clock high time tw(SCLH) 0.6 µs I2C fast mode 13
SDA setup time tsu(SDA) 250 ns I2C standard mode 13
SDA setup time tsu(SDA) 100 ns I2C fast mode 13
SDA data hold time th(SDA) 0.01 3.45 µs I2C standard mode 13
SDA data hold time th(SDA) 0.01 0.9 µs I2C fast mode 13
START condition hold time th(ST) 4 µs I2C standard mode 13
START condition hold time th(ST) 0.6 µs I2C fast mode 13
Repeated START condition setup time tsu(SR) 4.7 µs I2C standard mode 13
Repeated START condition setup time tsu(SR) 0.6 µs I2C fast mode 13
STOP condition setup time tsu(SP) 4 µs I2C standard mode 13
STOP condition setup time tsu(SP) 0.6 µs I2C fast mode 13
Bus free time between STOP and START condition tw(SP:SR) 4.7 µs I2C standard mode 13
Bus free time between STOP and START condition tw(SP:SR) 1.3 µs I2C fast mode 13
Supply voltage Vdd -0.3 4.8 V 14
I/O pins supply voltage Vdd_IO -0.3 4.8 V 14
Input voltage on any control pin Vin -0.3 V CS, SCL/SPC, SDA/SDI/SDO, SDO/SA0; maximum printed as Vdd_IO +0.3 V 14
Acceleration (powered) APOW 3000 g any axis, powered, Vdd = 2.5 V, 0.5 ms 14
Acceleration (powered) APOW 10000 g any axis, powered, Vdd = 2.5 V, 0.2 ms 14
Acceleration (unpowered) AUNP 3000 g any axis, unpowered, 0.5 ms 14
Acceleration (unpowered) AUNP 10000 g any axis, unpowered, 0.2 ms 14
Operating temperature range TOP -40 85 °C 14
Storage temperature range TSTG -40 125 °C 14
Electrostatic discharge protection ESD 2 kV HBM 14
Sensitivity So 0.061 mg/digit @ FS ±2.0 g 10
Sensitivity So 0.122 mg/digit @ FS ±4.0 g 10
Sensitivity So 0.244 mg/digit @ FS ±8.0 g 10
Sensitivity change vs. temperature TCSo 0.01 %/°C 10
Turn-on time, samples discarded Ton 1 # of samples CTRL4 (23h) (BW_SCALE_ODR) = 0 10
Current consumption in active mode IddA 180 µA ODR 100-800 Hz 11
Current consumption in active mode IddA 110 µA ODR 50 Hz 11
Current consumption in active mode IddA 50 µA ODR 10 Hz 11
Current consumption in power-down mode IddPdn 5 µA 11
Boot time Tboot 20 ms Time from Vdd on until all configuration and calibration parameters are loaded 11
Temperature sensor output change vs. temperature TSDr 8 digit/°C 11-bit resolution 11
Temperature refresh rate TODR 10 Hz 11

CAD (KiCad official)

  • Symbol: LIS2HH12TR
  • Footprint: Package_LGA:LGA-12_2x2mm_P0.5mm
  • 3D model: LGA-12(2x2) (KiCad packages3D, STEP)
  • 3D model files: lis2hh12tr-etched.step / lis2hh12tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lis2hh12tr.step / lis2hh12tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (47 pp, sha256 f73c1d52de1bf963, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF