main
Ray
Publish 0.1.0
4a1581a
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216
{
"slug": "lis2hh12tr",
"version": "0.1.0",
"type": "component",
"description": "STMicroelectronics Accelerometers, LGA-12(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"sensors",
"lis2hh12tr",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lis2hh12tr.kicad_sym",
"lis2hh12tr.kicad_mod",
"lis2hh12tr.glb",
"lis2hh12tr.step",
"lis2hh12tr.lbr",
"docs/hero.png",
"docs/lis2hh12tr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lis2hh12tr-hero.glb",
"lis2hh12tr-hero.overlay.json",
"lis2hh12tr-etched.glb"
],
"component": {
"mpn": "LIS2HH12TR",
"manufacturer": "STMicroelectronics",
"package": "LGA-12(2x2)",
"pin_count": 12,
"category": "Sensors",
"subcategory": "Accelerometers",
"datasheet": "https://www.st.com/content/ccc/resource/technical/document/datasheet/c9/16/f2/79/ca/31/47/89/DM00096789.pdf/files/DM00096789.pdf/jcr:content/translations/en.DM00096789.pdf",
"parts": {
"symbol": "lis2hh12tr.kicad_sym",
"footprint": "lis2hh12tr.kicad_mod",
"model_3d": "lis2hh12tr-hero.glb",
"model_3d_plain": "lis2hh12tr-etched.glb",
"model_3d_step": "lis2hh12tr-etched.step",
"model_3d_step_plain": "lis2hh12tr.step",
"lbr": "lis2hh12tr.lbr"
},
"distributor_links": {
"lcsc": "C221446",
"mouser": "511-LIS2HH12TR"
},
"distributor_check": {
"checked_at": "2026-11-10T15:46:17Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "deferred",
"error": "shared DigiKey quota guard: 556 calls left today"
},
"mouser": {
"pn": "511-LIS2HH12TR",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "SCL/SPC",
"type": "input",
"description": "I2C serial clock (SCL) or SPI serial port clock (SPC), which must be pulled up to Vdd_IO through an external resistor when used for I2C."
},
{
"number": "2",
"name": "CS",
"type": "input",
"description": "Selects the interface mode: high (1) gives SPI idle mode with I2C enabled, low (0) gives SPI communication with I2C disabled, and it must be tied high to Vdd_IO to use I2C."
},
{
"number": "3",
"name": "SDO/SA0",
"type": "tri_state",
"description": "Serves as the I2C least significant bit of the device address (SA0) or the SPI serial data output (SDO), with the address 0011101b when tied to supply and 0011110b when tied to ground."
},
{
"number": "4",
"name": "SDA/SDI/SDO",
"type": "bidirectional",
"description": "Serves as the I2C serial data line (SDA), which must be pulled up to Vdd_IO through an external resistor, or as SPI serial data input (SDI) or 3-wire interface serial data output (SDO)."
},
{
"number": "5",
"name": "RES",
"type": "passive",
"description": "Reserved pin that must be connected to GND."
},
{
"number": "6",
"name": "GND",
"type": "power_in",
"description": "0 V supply ground pin."
},
{
"number": "7",
"name": "GND",
"type": "power_in",
"description": "0 V supply ground pin."
},
{
"number": "8",
"name": "GND",
"type": "power_in",
"description": "0 V supply ground pin."
},
{
"number": "9",
"name": "Vdd",
"type": "power_in",
"description": "Main power supply, with an operational range of 1.71 V to 3.6 V (2.5 V typical calibration point)."
},
{
"number": "10",
"name": "Vdd_IO",
"type": "power_in",
"description": "Power supply for the I/O pins, from 1.71 V up to Vdd+0.1 V, and it can remain powered while Vdd is removed without blocking the communication buses."
},
{
"number": "11",
"name": "INT2",
"type": "output",
"description": "Interrupt pin 2 output from the sensor's interrupt generator."
},
{
"number": "12",
"name": "INT1",
"type": "output",
"description": "Interrupt pin 1 output from the sensor's interrupt generator."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [],
"pages_sent": 19,
"cost_usd": 0.0481,
"at": "2026-11-10T15:46:10"
},
"datasheet": {
"url": "https://www.st.com/content/ccc/resource/technical/document/datasheet/c9/16/f2/79/ca/31/47/89/DM00096789.pdf/files/DM00096789.pdf/jcr:content/translations/en.DM00096789.pdf",
"pages": 47,
"sha256": "f73c1d52de1bf963",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 12,
"described": 12,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lis2hh12tr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.0,
2.0,
1.025
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "5e6c16287491528f89c09590e0d5dace14debf478226f74b45504eb906119145",
"checked": "2026-11-10",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lis2hh12tr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.0,
2.0,
1.025
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "6619f9af10dbf0ff059f594e4d6172050af3fe1a605176eb0c5457515ffbf7bc",
"checked": "2026-11-10",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}