main
Ray
Publish 0.2.0
5294131
LD1117S25CTR
STMicroelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223
LD1117S25CTR from STMicroelectronics, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJ/GND | input | ADJ/GND |
| 2 | VOUT | power_out | Regulated 2.5 V output pin. Delivers up to 800 mA. Requires a minimum 10 uF capacitor to ground for loop stability. Electrically tied to the SOT-223 TAB (heatsink pad). KiCad's SOT-223-3_TabPin2 joins the tab to this pad (Note: The TAB is connected to the VOUT). |
| 3 | VIN | power_in | Unregulated DC input. Absolute maximum 15 V (18 V when IOUT < 20 mA). Dropout is ~1 V typical, so VIN must exceed VOUT + 1 V under full load. A local input decoupling capacitor is recommended. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-223 |
| Category | PMIC |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VO | 2.45 | 2.5 | 2.55 | V | Vin = 4.5 V, IO = 10 mA, TJ = 25 °C | 17 |
| Output voltage | VO | 2.4 | 2.6 | V | IO = 0 to 800 mA, Vin = 3.9 to 10 V | 17 | |
| Line regulation | ∆VO | 1 | 30 | mV | Vin = 3.9 to 10 V, IO = 0 mA | 17 | |
| Load regulation | ∆VO | 1 | 30 | mV | Vin = 3.9 V, IO = 0 to 800 mA | 17 | |
| Temperature stability | ∆VO | 0.5 | % | 17 | |||
| Long term stability | ∆VO | 0.3 | % | 1000 hrs, TJ = 125 °C | 17 | ||
| Operating input voltage | Vin | 15 | V | IO = 100 mA | 17 | ||
| Quiescent current | Id | 5 | 10 | mA | Vin ≤ 10 V | 17 | |
| Output current | IO | 800 | 950 | 1300 | mA | Vin = 7.5 V TJ = 25 °C | 17 |
| Supply voltage rejection | SVR | 60 | 75 | dB | IO = 40 mA, f = 120 Hz, TJ = 25 °C, Vin = 5.5 V, Vripple = 1 VPP | 17 | |
| Dropout voltage | Vd | 1 | 1.1 | V | IO = 100 mA, TJ = 0 to 125 °C | 17 | |
| Dropout voltage | Vd | 1.05 | 1.15 | V | IO = 500 mA, TJ = 0 to 125 °C | 17 | |
| Dropout voltage | Vd | 1.1 | 1.2 | V | IO = 800 mA, TJ = 0 to 125 °C | 17 | |
| Dropout voltage | Vd | 1.1 | V | IO = 100 mA | 17 | ||
| Dropout voltage | Vd | 1.2 | V | IO = 500 mA | 17 | ||
| Dropout voltage | Vd | 1.3 | V | IO = 800 mA | 17 | ||
| Thermal regulation | 0.01 | 0.1 | %/W | Ta = 25 °C, 30 ms Pulse | 17 | ||
| Storage temperature range | TSTG | -40 | 150 | °C | 7 | ||
| DC input voltage | VIN | 15 | V | 7 | |||
| Power dissipation | PTOT | 12 | W | 7 | |||
| Operating junction temperature range | TOP | -40 | 125 | °C | for C version | 7 | |
| Output noise voltage | eN | 100 | µV | B = 10 Hz to 10 kHz, TJ = 25 °C | 17 | ||
| Thermal resistance junction-case | RthJC | 15 | °C/W | SOT-223 package | 7 | ||
| Thermal resistance junction-ambient | RthJA | 110 | °C/W | SOT-223 package | 7 |
CAD (KiCad official)
- Symbol:
LD1117S25CTR - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223 (KiCad packages3D, STEP)
- 3D model files:
ld1117s25ctr-etched.step/ld1117s25ctr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ld1117s25ctr.step/ld1117s25ctr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (46 pp, sha256
4fd8415a20d932fd, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LD1117S25CTR
**STMicroelectronics** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223
LD1117S25CTR from STMicroelectronics, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJ/GND | input | ADJ/GND |
| 2 | VOUT | power_out | Regulated 2.5 V output pin. Delivers up to 800 mA. Requires a minimum 10 uF capacitor to ground for loop stability. Electrically tied to the SOT-223 TAB (heatsink pad). KiCad's SOT-223-3_TabPin2 joins the tab to this pad (Note: The TAB is connected to the VOUT). |
| 3 | VIN | power_in | Unregulated DC input. Absolute maximum 15 V (18 V when IOUT < 20 mA). Dropout is ~1 V typical, so VIN must exceed VOUT + 1 V under full load. A local input decoupling capacitor is recommended. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-223 |
| Category | PMIC |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VO | 2.45 | 2.5 | 2.55 | V | Vin = 4.5 V, IO = 10 mA, TJ = 25 °C | 17 |
| Output voltage | VO | 2.4 | | 2.6 | V | IO = 0 to 800 mA, Vin = 3.9 to 10 V | 17 |
| Line regulation | ∆VO | | 1 | 30 | mV | Vin = 3.9 to 10 V, IO = 0 mA | 17 |
| Load regulation | ∆VO | | 1 | 30 | mV | Vin = 3.9 V, IO = 0 to 800 mA | 17 |
| Temperature stability | ∆VO | | | 0.5 | % | | 17 |
| Long term stability | ∆VO | | | 0.3 | % | 1000 hrs, TJ = 125 °C | 17 |
| Operating input voltage | Vin | | | 15 | V | IO = 100 mA | 17 |
| Quiescent current | Id | | 5 | 10 | mA | Vin ≤ 10 V | 17 |
| Output current | IO | 800 | 950 | 1300 | mA | Vin = 7.5 V TJ = 25 °C | 17 |
| Supply voltage rejection | SVR | 60 | 75 | | dB | IO = 40 mA, f = 120 Hz, TJ = 25 °C, Vin = 5.5 V, Vripple = 1 VPP | 17 |
| Dropout voltage | Vd | | 1 | 1.1 | V | IO = 100 mA, TJ = 0 to 125 °C | 17 |
| Dropout voltage | Vd | | 1.05 | 1.15 | V | IO = 500 mA, TJ = 0 to 125 °C | 17 |
| Dropout voltage | Vd | | 1.1 | 1.2 | V | IO = 800 mA, TJ = 0 to 125 °C | 17 |
| Dropout voltage | Vd | | | 1.1 | V | IO = 100 mA | 17 |
| Dropout voltage | Vd | | | 1.2 | V | IO = 500 mA | 17 |
| Dropout voltage | Vd | | | 1.3 | V | IO = 800 mA | 17 |
| Thermal regulation | | | 0.01 | 0.1 | %/W | Ta = 25 °C, 30 ms Pulse | 17 |
| Storage temperature range | TSTG | -40 | | 150 | °C | | 7 |
| DC input voltage | VIN | | | 15 | V | | 7 |
| Power dissipation | PTOT | | | 12 | W | | 7 |
| Operating junction temperature range | TOP | -40 | | 125 | °C | for C version | 7 |
| Output noise voltage | eN | | 100 | | µV | B = 10 Hz to 10 kHz, TJ = 25 °C | 17 |
| Thermal resistance junction-case | RthJC | | 15 | | °C/W | SOT-223 package | 7 |
| Thermal resistance junction-ambient | RthJA | | 110 | | °C/W | SOT-223 package | 7 |
## CAD (KiCad official)
- Symbol: `LD1117S25CTR`
- Footprint: `Package_TO_SOT_SMD:SOT-223-3_TabPin2`
- 3D model: SOT-223 (KiCad packages3D, STEP)
- 3D model files: `ld1117s25ctr-etched.step` / `ld1117s25ctr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ld1117s25ctr.step` / `ld1117s25ctr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/ld1117.pdf) (46 pp, sha256 `4fd8415a20d932fd`, retrieved 2026-11-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ld1117s25ctr-datasheet.pdf)