← Commit history
README.md+36−18
@@ -2,16 +2,15 @@  **STMicroelectronics** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223 -LD1117S25CTR from STMicroelectronics, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.+LD1117S25CTR from STMicroelectronics, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.  ## Pinout  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | GND | power_in | Ground reference for the fixed-voltage LD1117 (this pin is labeled ADJ/GND in the datasheet; on fixed-output versions such as the LD1117#25 it is the ground return). Connect to system ground; the output-capacitor return should share this node. |-| 2 | VOUT | power_out | Regulated 2.5 V output pin. Delivers up to 800 mA. Requires a minimum 10 uF capacitor to ground for loop stability. Electrically tied to the SOT-223 TAB (heatsink pad). |+| 1 | ADJ/GND | input | ADJ/GND |+| 2 | VOUT | power_out | Regulated 2.5 V output pin. Delivers up to 800 mA. Requires a minimum 10 uF capacitor to ground for loop stability. Electrically tied to the SOT-223 TAB (heatsink pad). KiCad's SOT-223-3_TabPin2 joins the tab to this pad (Note: The TAB is connected to the VOUT). | | 3 | VIN | power_in | Unregulated DC input. Absolute maximum 15 V (18 V when IOUT < 20 mA). Dropout is ~1 V typical, so VIN must exceed VOUT + 1 V under full load. A local input decoupling capacitor is recommended. |-| TAB | VOUT | power_out | Thermal/heatsink tab on the SOT-223 package. Electrically connected internally to VOUT (pin 2). Solder to a copper pour that also serves as the VOUT trace to spread heat (RthJC = 15 degC/W, RthJA = 110 degC/W for SOT-223). |  ## Key specifications @@ -20,19 +19,38 @@ LD1117S25CTR from STMicroelectronics, in a SOT-223. Pinout and pin descriptions | Manufacturer | STMicroelectronics | | Package | SOT-223 | | Category | PMIC |-| Pins | 4 |--## Ordering variants--Same part, different packaging or reel option.--- `LD1117S25TR`-- `LD1117S25CTR`-- `LD1117S25CTR-DG13`-- `LD1117DT25TR`-- `LD1117DT25CTR`-- `LD1117V25`-- `LD1117V25C`+| Pins | 3 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Output voltage | VO | 2.45 | 2.5 | 2.55 | V | Vin = 4.5 V, IO = 10 mA, TJ = 25 °C | 17 |+| Output voltage | VO | 2.4 |  | 2.6 | V | IO = 0 to 800 mA, Vin = 3.9 to 10 V | 17 |+| Line regulation | ∆VO |  | 1 | 30 | mV | Vin = 3.9 to 10 V, IO = 0 mA | 17 |+| Load regulation | ∆VO |  | 1 | 30 | mV | Vin = 3.9 V, IO = 0 to 800 mA | 17 |+| Temperature stability | ∆VO |  |  | 0.5 | % |  | 17 |+| Long term stability | ∆VO |  |  | 0.3 | % | 1000 hrs, TJ = 125 °C | 17 |+| Operating input voltage | Vin |  |  | 15 | V | IO = 100 mA | 17 |+| Quiescent current | Id |  | 5 | 10 | mA | Vin ≤ 10 V | 17 |+| Output current | IO | 800 | 950 | 1300 | mA | Vin = 7.5 V TJ = 25 °C | 17 |+| Supply voltage rejection | SVR | 60 | 75 |  | dB | IO = 40 mA, f = 120 Hz, TJ = 25 °C, Vin = 5.5 V, Vripple = 1 VPP | 17 |+| Dropout voltage | Vd |  | 1 | 1.1 | V | IO = 100 mA, TJ = 0 to 125 °C | 17 |+| Dropout voltage | Vd |  | 1.05 | 1.15 | V | IO = 500 mA, TJ = 0 to 125 °C | 17 |+| Dropout voltage | Vd |  | 1.1 | 1.2 | V | IO = 800 mA, TJ = 0 to 125 °C | 17 |+| Dropout voltage | Vd |  |  | 1.1 | V | IO = 100 mA | 17 |+| Dropout voltage | Vd |  |  | 1.2 | V | IO = 500 mA | 17 |+| Dropout voltage | Vd |  |  | 1.3 | V | IO = 800 mA | 17 |+| Thermal regulation |  |  | 0.01 | 0.1 | %/W | Ta = 25 °C, 30 ms Pulse | 17 |+| Storage temperature range | TSTG | -40 |  | 150 | °C |  | 7 |+| DC input voltage | VIN |  |  | 15 | V |  | 7 |+| Power dissipation | PTOT |  |  | 12 | W |  | 7 |+| Operating junction temperature range | TOP | -40 |  | 125 | °C | for C version | 7 |+| Output noise voltage | eN |  | 100 |  | µV | B = 10 Hz to 10 kHz, TJ = 25 °C | 17 |+| Thermal resistance junction-case | RthJC |  | 15 |  | °C/W | SOT-223 package | 7 |+| Thermal resistance junction-ambient | RthJA |  | 110 |  | °C/W | SOT-223 package | 7 |  ## CAD (KiCad official) @@ -45,7 +63,7 @@ Same part, different packaging or reel option.  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [STMicroelectronics datasheet](docs/ld1117s25ctr-datasheet.pdf) (46 pp, sha256 `eb9bdaeee6a99a12`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/ld1117.pdf) (46 pp, sha256 `4fd8415a20d932fd`, retrieved 2026-11-17, tier: manufacturer) - **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
docs/ld1117s25ctr-datasheet.pdf
⋯ 1 unchanged line ⋯
ld1117s25ctr-hero.glbadded
⋯ 1 unchanged line ⋯
ld1117s25ctr-hero.overlay.jsonadded+168
@@ -0,0 +1,168 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "LD1117S25CTR",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 4,+   "span_mm": 8.4,+   "dash_mm": 0.21,+   "gap_mm": 0.126,+   "pad_stroke_mm": 0.0504+  },+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 5,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }+  },+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 3,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "board_underside": false,+  "electrical_pads_without_contact": [],+  "mounting_pads_left_out": [],+  "centre_offset_mm": 0.0,+  "over_pads": true,+  "tolerance_mm": 0.664,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -3.5,+   3.5,+   -2.684,+   2.684+  ],+  "pads_bbox_mm": [+   -4.15,+   4.15,+   -3.05,+   3.05+  ],+  "seating_z_mm": 0.0+ },+ "sources": {+  "glb": "ld1117s25ctr-etched.glb",+  "glb_sha256": "fa2fdd7315a97ba03f45ecfc6ee5e35767fad3cacb9a705e30e7b73eeb92bccf",+  "footprint": "ld1117s25ctr.kicad_mod",+  "footprint_sha256": "5f6cad94d6c821d01d360a4a09cca4b89e63ae0ce12c33d1dd0ba4e30e86c523",+  "pins": "page.json component.pins",+  "pins_sha256": "da523e88a63da62721bb995a4f0d25f47bb7a10c614c01277fde98f6ce1ab8fb"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "ADJ/GND",+   "x": -4.3,+   "y": -2.3,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "2",+   "text": "VOUT",+   "x": -4.3,+   "y": 0.0,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "3",+   "text": "VIN",+   "x": -4.3,+   "y": 2.3,+   "align": "right",+   "vertical": false,+   "h": 0.6+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -3.15,+    -2.3+   ],+   "size_mm": [+    2.0,+    1.5+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    -3.15,+    0.0+   ],+   "size_mm": [+    2.0,+    1.5+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    3.15,+    0.0+   ],+   "size_mm": [+    2.0,+    3.8+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    -3.15,+    2.3+   ],+   "size_mm": [+    2.0,+    1.5+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file
ld1117s25ctr.kicad_mod+6−40
@@ -107,46 +107,6 @@ 		(layer "F.SilkS") 		(uuid "27420593-f422-495a-9e17-88a99bcd8a3d") 	)-	(fp_line-		(start -4.4 -3.6)-		(end -4.4 3.6)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-		(uuid "2d708b29-208a-4760-a2c5-6626e4d03d29")-	)-	(fp_line-		(start -4.4 3.6)-		(end 4.4 3.6)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-		(uuid "ffe8efb3-9432-4dfe-8e3a-faf2eb064270")-	)-	(fp_line-		(start 4.4 -3.6)-		(end -4.4 -3.6)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-		(uuid "d963e7fb-b321-4298-bcd6-9650f5938938")-	)-	(fp_line-		(start 4.4 3.6)-		(end 4.4 -3.6)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-		(uuid "18839f08-10e9-4a73-9312-8be172f09091")-	) 	(fp_line 		(start -1.85 -2.35) 		(end -1.85 3.35)@@ -248,4 +208,10 @@ 			(xyz 0 0 0) 		) 	)+	(fp_poly+		(pts (xy -4.40 -3.30) (xy -2.10 -3.30) (xy -2.10 -3.60) (xy 2.10 -3.60) (xy 2.10 -2.15) (xy 4.40 -2.15) (xy 4.40 2.15) (xy 2.10 2.15) (xy 2.10 3.60) (xy -2.10 3.60) (xy -2.10 3.30) (xy -4.40 3.30))+		(stroke (width 0.05) (type solid))+		(fill no)+		(layer "F.CrtYd")+	) )
ld1117s25ctr.kicad_sym+2−2
@@ -8,8 +8,8 @@       (stroke (width 0.254) (type default)) (fill (type background)))     )     (symbol "LD1117S25CTR_1_1"-    (pin power_in line (at -17.78 0.00 0) (length 5.08)-      (name "GND" (effects (font (size 1.27 1.27))))+    (pin input line (at -17.78 0.00 0) (length 5.08)+      (name "ADJ/GND" (effects (font (size 1.27 1.27))))       (number "1" (effects (font (size 1.27 1.27))))     )     (pin power_out line (at -17.78 -2.54 0) (length 5.08)
ld1117s25ctr.lbr+2−2
@@ -85,7 +85,7 @@   <wire x1="-12.7" y1="-5.08" x2="-12.7" y2="2.54" width="0.254" layer="94"/>   <text x="0.0000" y="5.0800" size="1.27" layer="95" align="center">&gt;NAME</text>   <text x="0.0000" y="-7.6200" size="1.27" layer="96" align="center">&gt;VALUE</text>-  <pin name="GND" x="-17.78" y="0" length="middle" direction="pwr"/>+  <pin name="ADJ/GND" x="-17.78" y="0" length="middle" direction="in"/>   <pin name="VOUT" x="-17.78" y="-2.54" length="middle" direction="out"/>   <pin name="VIN" x="17.78" y="0" length="middle" direction="pwr" rot="R180"/> </symbol>@@ -99,7 +99,7 @@   <devices>     <device name="" package="SOT-223-3_TabPin2">       <connects>-        <connect gate="G$1" pin="GND" pad="1"/>+        <connect gate="G$1" pin="ADJ/GND" pad="1"/>         <connect gate="G$1" pin="VOUT" pad="2 2@2"/>         <connect gate="G$1" pin="VIN" pad="3"/>       </connects>
package.json+173−6
@@ -1,12 +1,14 @@ {   "slug": "ld1117s25ctr",-  "version": "0.1.0",+  "version": "0.2.0",   "type": "component",-  "description": "STMicroelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "description": "STMicroelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",   "tags": [     "component",     "pmic",-    "ld1117s25ctr"+    "ld1117s25ctr",+    "factory-2.0.0",+    "extractor-text"   ],   "dependencies": {},   "hero": {@@ -24,6 +26,171 @@     "docs/hero.png",     "docs/ld1117s25ctr-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"-  ]-}\ No newline at end of file+    "viewers/footprint.html",+    "ld1117s25ctr-hero.glb",+    "ld1117s25ctr-hero.overlay.json"+  ],+  "component": {+    "mpn": "LD1117S25CTR",+    "manufacturer": "STMicroelectronics",+    "package": "SOT-223",+    "pin_count": 3,+    "category": "PMIC",+    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "datasheet": "https://www.st.com/resource/en/datasheet/ld1117.pdf",+    "parts": {+      "symbol": "ld1117s25ctr.kicad_sym",+      "footprint": "ld1117s25ctr.kicad_mod",+      "model_3d": "ld1117s25ctr-hero.glb",+      "model_3d_plain": "ld1117s25ctr.glb",+      "model_3d_step": "ld1117s25ctr-etched.step",+      "model_3d_step_plain": "ld1117s25ctr.step",+      "lbr": "ld1117s25ctr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2802527",+      "digikey": "497-1240-2-ND",+      "mouser": "511-LD1117S25C"+    },+    "distributor_check": {+      "checked_at": "2026-11-17T06:40:26Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "497-1240-2-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "511-LD1117S25C",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "ADJ/GND",+        "type": "input",+        "description": "ADJ/GND"+      },+      {+        "number": "2",+        "name": "VOUT",+        "type": "power_out",+        "description": "Regulated 2.5 V output pin. Delivers up to 800 mA. Requires a minimum 10 uF capacitor to ground for loop stability. Electrically tied to the SOT-223 TAB (heatsink pad). KiCad's SOT-223-3_TabPin2 joins the tab to this pad (Note: The TAB is connected to the VOUT)."+      },+      {+        "number": "3",+        "name": "VIN",+        "type": "power_in",+        "description": "Unregulated DC input. Absolute maximum 15 V (18 V when IOUT < 20 mA). Dropout is ~1 V typical, so VIN must exceed VOUT + 1 V under full load. A local input decoupling capacitor is recommended."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.st.com/resource/en/datasheet/ld1117.pdf",+        "pages": 46,+        "sha256": "4fd8415a20d932fd",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 3,+        "described": 3,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "ld1117s25ctr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          7.0,+          6.5,+          1.7+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "77ad6dbacc493cb619c728f26d2ddcf461eb0feb6b977b47d01d51e67016f654",+        "checked": "2026-11-17",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ld1117s25ctr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          7.0,+          6.5,+          1.7+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "f25c738402c26e18303be7762411be1b1c82a349a2b574fae52093c50ed98be2",+        "checked": "2026-11-17",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ],+    "package_dims": {+      "package_code": "SOT-223",+      "source_page": 29,+      "D": {+        "nom_mm": 6.5,+        "range_mm": [+          6.3,+          6.7+        ]+      },+      "E1": {+        "nom_mm": 3.5,+        "range_mm": [+          3.3,+          3.7+        ]+      },+      "E": {+        "nom_mm": 7.0,+        "range_mm": [+          6.7,+          7.3+        ]+      },+      "e": {+        "nom_mm": 2.3,+        "range_mm": [+          null,+          null+        ]+      },+      "A": {+        "nom_mm": 1.8,+        "range_mm": [+          null,+          1.8+        ]+      },+      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",+      "model_check": {+        "file": "ld1117s25ctr.step",+        "verdict": "PASS",+        "reasons": [+          "height and body within the datasheet's package drawing"+        ],+        "by": "factory/package_fit.py"+      }+    }+  }+}
page.json+98−37
@@ -4,69 +4,81 @@   "slug": "ld1117s25ctr",   "title": "LD1117S25CTR",   "brief": "STMicroelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.2.0",   "license": "CC-BY-SA-4.0",   "tags": [     "component",     "pmic",-    "ld1117s25ctr"+    "ld1117s25ctr",+    "factory-2.0.0",+    "extractor-text"   ],   "component": {     "mpn": "LD1117S25CTR",     "manufacturer": "STMicroelectronics",     "package": "SOT-223",-    "pin_count": 4,+    "pin_count": 3,     "category": "PMIC",     "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",-    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2106031741_STMicroelectronics-LD1117S25CTR_C2802527.pdf",+    "datasheet": "https://www.st.com/resource/en/datasheet/ld1117.pdf",     "parts": {       "symbol": "ld1117s25ctr.kicad_sym",       "footprint": "ld1117s25ctr.kicad_mod",-      "model_3d": "ld1117s25ctr-etched.glb",+      "model_3d": "ld1117s25ctr-hero.glb",       "model_3d_plain": "ld1117s25ctr.glb",       "model_3d_step": "ld1117s25ctr-etched.step",       "model_3d_step_plain": "ld1117s25ctr.step",       "lbr": "ld1117s25ctr.lbr"     },-    "distributor_links": {},+    "distributor_links": {+      "lcsc": "C2802527",+      "digikey": "497-1240-2-ND",+      "mouser": "511-LD1117S25C"+    },+    "distributor_check": {+      "checked_at": "2026-11-17T06:40:26Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "497-1240-2-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "511-LD1117S25C",+        "status": "found"+      }+    },     "pins": [       {         "number": "1",-        "name": "GND",-        "type": "power_in",-        "description": "Ground reference for the fixed-voltage LD1117 (this pin is labeled ADJ/GND in the datasheet; on fixed-output versions such as the LD1117#25 it is the ground return). Connect to system ground; the output-capacitor return should share this node."+        "name": "ADJ/GND",+        "type": "input",+        "description": "ADJ/GND"       },       {         "number": "2",         "name": "VOUT",         "type": "power_out",-        "description": "Regulated 2.5 V output pin. Delivers up to 800 mA. Requires a minimum 10 uF capacitor to ground for loop stability. Electrically tied to the SOT-223 TAB (heatsink pad)."+        "description": "Regulated 2.5 V output pin. Delivers up to 800 mA. Requires a minimum 10 uF capacitor to ground for loop stability. Electrically tied to the SOT-223 TAB (heatsink pad). KiCad's SOT-223-3_TabPin2 joins the tab to this pad (Note: The TAB is connected to the VOUT)."       },       {         "number": "3",         "name": "VIN",         "type": "power_in",         "description": "Unregulated DC input. Absolute maximum 15 V (18 V when IOUT < 20 mA). Dropout is ~1 V typical, so VIN must exceed VOUT + 1 V under full load. A local input decoupling capacitor is recommended."-      },-      {-        "number": "TAB",-        "name": "VOUT",-        "type": "power_out",-        "description": "Thermal/heatsink tab on the SOT-223 package. Electrically connected internally to VOUT (pin 2). Solder to a copper pour that also serves as the VOUT trace to spread heat (RthJC = 15 degC/W, RthJA = 110 degC/W for SOT-223)."       }     ],     "provenance": {       "extractor": "ds2sf",       "datasheet": {-        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2106031741_STMicroelectronics-LD1117S25CTR_C2802527.pdf",+        "url": "https://www.st.com/resource/en/datasheet/ld1117.pdf",         "pages": 46,-        "sha256": "eb9bdaeee6a99a12",-        "source_tier": "lcsc"+        "sha256": "4fd8415a20d932fd",+        "source_tier": "mfr"       },       "cad": "KiCad official (CC-BY-SA 4.0)",       "pins": {-        "total": 4,-        "described": 4,+        "total": 3,+        "described": 3,         "cites_pages": true,         "refuses_to_fabricate": true       }@@ -84,15 +96,15 @@         "origin": "footprint origin = pad-pattern centre",         "seat": "z = 0",         "extents_mm": [-          7.0,+          7,           6.5,           1.7         ],-        "zmin_mm": -0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "77ad6dbacc493cb619c728f26d2ddcf461eb0feb6b977b47d01d51e67016f654",-        "checked": "2026-10-07",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -103,18 +115,66 @@         "origin": "footprint origin = pad-pattern centre",         "seat": "z = 0",         "extents_mm": [-          7.0,+          7,           6.5,           1.7         ],-        "zmin_mm": -0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "530eb7e0f0b1b6cc9297bf2904f2d2b00a9a63f69afda5e95c743e3843f9d47f",-        "checked": "2026-10-16",+        "sha256": "f25c738402c26e18303be7762411be1b1c82a349a2b574fae52093c50ed98be2",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }-    ]+    ],+    "package_dims": {+      "package_code": "SOT-223",+      "source_page": 29,+      "D": {+        "nom_mm": 6.5,+        "range_mm": [+          6.3,+          6.7+        ]+      },+      "E1": {+        "nom_mm": 3.5,+        "range_mm": [+          3.3,+          3.7+        ]+      },+      "E": {+        "nom_mm": 7,+        "range_mm": [+          6.7,+          7.3+        ]+      },+      "e": {+        "nom_mm": 2.3,+        "range_mm": [+          null,+          null+        ]+      },+      "A": {+        "nom_mm": 1.8,+        "range_mm": [+          null,+          1.8+        ]+      },+      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",+      "model_check": {+        "file": "ld1117s25ctr.step",+        "verdict": "PASS",+        "reasons": [+          "height and body within the datasheet's package drawing"+        ],+        "by": "factory/package_fit.py"+      }+    }   },   "metadata": {     "specs": {@@ -156,11 +216,10 @@     "docs/ld1117s25ctr-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html",-    "ld1117s25ctr-etched.step"+    "ld1117s25ctr-hero.glb",+    "ld1117s25ctr-hero.overlay.json"   ],-  "visibility": {-    "public": true-  },+  "visibility": "public",   "variants": [     {       "mpn": "LD1117S25TR",@@ -191,5 +250,7 @@       "kind": "unknown"     }   ],-  "updated_at": "2026-09-24T23:48:25.502Z"-}+  "updated_at": "2026-09-24T23:48:25.502Z",+  "description": "STMicroelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",+  "org": "adom"+}\ No newline at end of file
viewers/footprint.html+1−65
@@ -1,65 +1 @@-<!doctype html><html lang=en><head><meta charset=utf-8>-<meta name=viewport content="width=device-width,initial-scale=1"><title>RAY/LD1117S25CTR footprint</title>-<style>-:root{--bg:#0d1117;--panel:#161b22;--edge:#30363d;--ink:#e6edf3;--mut:#8b949e;--acc:#00b8b0;--accb:#00e6dc;--hi:#6ea8fe}-*{box-sizing:border-box;margin:0}html,body{height:100%}-body{background:var(--bg);color:var(--ink);font-family:'Satoshi',system-ui,sans-serif;display:flex;flex-direction:column}-.bar{display:flex;flex-wrap:wrap;align-items:center;gap:8px;padding:8px 11px;border-bottom:1px solid var(--edge);flex:none}-.bar .h{font-size:11px;text-transform:uppercase;letter-spacing:.06em;color:var(--mut);font-weight:700}-.bar .sp{flex:1}-.lyrtog{display:inline-flex;align-items:center;gap:6px;font-size:11px;color:var(--mut);background:#1a2130;border:1px solid var(--edge);border-radius:999px;padding:3px 9px;cursor:pointer;user-select:none}-.lyrtog.on{color:var(--ink);border-color:#485162}.lyrtog:not(.on){opacity:.5}-.lyrtog .d{width:8px;height:8px;border-radius:50%;background:#485162}-.stage{flex:1;min-height:0;position:relative;overflow:hidden;background:var(--bg);cursor:grab;touch-action:none}-.stage.drag{cursor:grabbing}-.stage svg{position:absolute;inset:0;width:100%;height:100%}-.pingroup,.pad{cursor:pointer}-.pingroup.hi .pinvis{stroke:var(--hi)!important;stroke-width:7}-rect.pad.hi{stroke:var(--hi);stroke-width:.15;paint-order:stroke}-.lyr-off{display:none}-#tip{position:fixed;z-index:99;pointer-events:none;display:none;max-width:250px;background:#0d1117;border:1px solid var(--acc);border-radius:8px;padding:7px 10px;box-shadow:0 8px 26px #000a}-#tip .tn{font:700 12px ui-monospace,monospace;color:var(--accb)}-#tip .tt{font-size:10px;text-transform:uppercase;letter-spacing:.04em;color:var(--mut);margin-top:1px}-#tip .td{font-size:11px;color:var(--ink);margin-top:5px;line-height:1.4}-</style></head><body>-<div class=bar><span class=h>PCB footprint</span><span class=sp></span><button class="lyrtog on" data-lyr="copper"><span class="d" style="background:#e35d5d"></span>Copper</button><button class="lyrtog on" data-lyr="silk"><span class="d" style="background:#e6edf3"></span>Silkscreen</button><button class="lyrtog" data-lyr="fab"><span class="d" style="background:#8b949e"></span>Fab</button><button class="lyrtog" data-lyr="courtyard"><span class="d" style="background:#bc8cff"></span>Courtyard</button></div>-<div class=stage id=stage><svg xmlns='http://www.w3.org/2000/svg' viewBox='-4.800 -4.000 9.600 8.000' style='width:100%;height:100%'><line class='ly-silk' x1='-1.850' y1='-3.410' x2='1.910' y2='-3.410' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='-1.850' y1='3.410' x2='1.910' y2='3.410' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='1.910' y1='-3.410' x2='1.910' y2='-2.150' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='1.910' y1='3.410' x2='1.910' y2='2.150' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-courtyard' x1='-4.400' y1='-3.600' x2='-4.400' y2='3.600' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-4.400' y1='3.600' x2='4.400' y2='3.600' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='4.400' y1='-3.600' x2='-4.400' y2='-3.600' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='4.400' y1='3.600' x2='4.400' y2='-3.600' stroke='#4ade80' stroke-width='0.050'/><line class='ly-fab' x1='-1.850' y1='-2.350' x2='-1.850' y2='3.350' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-1.850' y1='-2.350' x2='-0.850' y2='-3.350' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-1.850' y1='3.350' x2='1.850' y2='3.350' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-0.850' y1='-3.350' x2='1.850' y2='-3.350' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='1.850' y1='-3.350' x2='1.850' y2='3.350' stroke='#f472b6' stroke-width='0.100'/><rect class='ly-copper pad' data-num='1' data-name='GND' x='-4.150' y='-3.050' width='2.000' height='1.500' rx='0.375' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-3.150' y='-2.300' font-size='0.900' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>1</text><rect class='ly-copper pad' data-num='2' data-name='VOUT' x='-4.150' y='-0.750' width='2.000' height='1.500' rx='0.375' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-3.150' y='0.000' font-size='0.900' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>2</text><rect class='ly-copper pad' data-num='2' data-name='VOUT' x='2.150' y='-1.900' width='2.000' height='3.800' rx='0.500' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='3.150' y='0.000' font-size='1.100' transform='rotate(-90 3.150 0.000)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>2</text><rect class='ly-copper pad' data-num='3' data-name='VIN' x='-4.150' y='1.550' width='2.000' height='1.500' rx='0.375' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-3.150' y='2.300' font-size='0.900' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>3</text></svg></div>-<div id=tip></div>-<script>-var KIND="footprint", MPN="RAY/LD1117S25CTR", PINS=[{"desc":"","name":"GND","number":"1","type":""},{"desc":"","name":"VOUT","number":"2","type":""},{"desc":"","name":"VIN","number":"3","type":""}];-var byNum={}; PINS.forEach(function(p){byNum[String(p.number)]=p;});-var stage=document.getElementById('stage'), svg=stage.querySelector('svg'), tip=document.getElementById('tip');-// ---- pan/zoom -----var vb=(svg.getAttribute('viewBox')||'0 0 100 100').split(/\s+/).map(Number), base=vb.slice();-function setVB(){svg.setAttribute('viewBox',vb.join(' '));}-stage.addEventListener('wheel',function(e){e.preventDefault();var r=stage.getBoundingClientRect();var mx=(e.clientX-r.left)/r.width,my=(e.clientY-r.top)/r.height;var f=e.deltaY<0?0.88:1.14;var nw=vb[2]*f,nh=vb[3]*f;vb[0]+=(vb[2]-nw)*mx;vb[1]+=(vb[3]-nh)*my;vb[2]=nw;vb[3]=nh;setVB();},{passive:false});-var pan=null;-stage.addEventListener('pointerdown',function(e){pan={x:e.clientX,y:e.clientY};stage.classList.add('drag');stage.setPointerCapture(e.pointerId);});-stage.addEventListener('pointermove',function(e){if(!pan)return;var r=stage.getBoundingClientRect();vb[0]-=(e.clientX-pan.x)/r.width*vb[2];vb[1]-=(e.clientY-pan.y)/r.height*vb[3];pan={x:e.clientX,y:e.clientY};setVB();});-function endPan(){pan=null;stage.classList.remove('drag');}-stage.addEventListener('pointerup',endPan);stage.addEventListener('pointerleave',endPan);-stage.addEventListener('dblclick',function(){vb=base.slice();setVB();});-// ---- cross-highlight bus -----function els(n){return [].slice.call(document.querySelectorAll('[data-num="'+n+'"]'));}-function clearHi(){[].slice.call(document.querySelectorAll('.hi')).forEach(function(e){e.classList.remove('hi');});}-function hi(n){els(n).forEach(function(e){e.classList.add('hi');});}-function post(n){try{parent.postMessage({type:'lbr-hover',pin:n===null?null:String(n),mpn:MPN},'*');}catch(_){}}-function showTip(n,x,y){var p=byNum[String(n)];if(!p)return;tip.innerHTML='<span class=tn></span><div class=tt></div><div class=td></div>';tip.querySelector('.tn').textContent=n+'  '+(p.name||'');tip.querySelector('.tt').textContent=p.type||'';var d=p.desc||'';if(d)tip.querySelector('.td').textContent=d;else tip.querySelector('.td').style.display='none';tip.style.display='block';tip.style.left=(x+14)+'px';tip.style.top=(y+12)+'px';}-[].slice.call(document.querySelectorAll('.pingroup,.pad')).forEach(function(g){-  var n=g.getAttribute('data-num');-  g.addEventListener('mouseenter',function(e){clearHi();hi(n);post(n);showTip(n,e.clientX,e.clientY);});-  g.addEventListener('mousemove',function(e){tip.style.left=(e.clientX+14)+'px';tip.style.top=(e.clientY+12)+'px';});-  g.addEventListener('mouseleave',function(){clearHi();post(null);tip.style.display='none';});-});-window.addEventListener('message',function(e){var d=e.data||{};if(d.type!=='lbr-hover')return;clearHi();if(d.pin!=null)hi(d.pin);});-// ---- footprint layer toggles -----[].slice.call(document.querySelectorAll('.lyrtog')).forEach(function(b){-  function apply(on){[].slice.call(document.querySelectorAll('.ly-'+b.getAttribute('data-lyr'))).forEach(function(el){el.classList.toggle('lyr-off',!on);});}-  apply(b.classList.contains('on'));-  b.addEventListener('click',function(){apply(b.classList.toggle('on'));});-});-// ---- auto-grow the host readme iframe -----function ph(){var h=Math.max(360,Math.min(16000,document.body.scrollHeight||420));parent.postMessage({type:'readme-height',height:h},'*');}-window.addEventListener('load',ph);setTimeout(ph,300);-</script>-</body></html>+<!doctype html><title>ld1117s25ctr</title>\ No newline at end of file
viewers/symbol.html+1−65
@@ -1,65 +1 @@-<!doctype html><html lang=en><head><meta charset=utf-8>-<meta name=viewport content="width=device-width,initial-scale=1"><title>RAY/LD1117S25CTR symbol</title>-<style>-:root{--bg:#0d1117;--panel:#161b22;--edge:#30363d;--ink:#e6edf3;--mut:#8b949e;--acc:#00b8b0;--accb:#00e6dc;--hi:#6ea8fe}-*{box-sizing:border-box;margin:0}html,body{height:100%}-body{background:var(--bg);color:var(--ink);font-family:'Satoshi',system-ui,sans-serif;display:flex;flex-direction:column}-.bar{display:flex;flex-wrap:wrap;align-items:center;gap:8px;padding:8px 11px;border-bottom:1px solid var(--edge);flex:none}-.bar .h{font-size:11px;text-transform:uppercase;letter-spacing:.06em;color:var(--mut);font-weight:700}-.bar .sp{flex:1}-.lyrtog{display:inline-flex;align-items:center;gap:6px;font-size:11px;color:var(--mut);background:#1a2130;border:1px solid var(--edge);border-radius:999px;padding:3px 9px;cursor:pointer;user-select:none}-.lyrtog.on{color:var(--ink);border-color:#485162}.lyrtog:not(.on){opacity:.5}-.lyrtog .d{width:8px;height:8px;border-radius:50%;background:#485162}-.stage{flex:1;min-height:0;position:relative;overflow:hidden;background:var(--bg);cursor:grab;touch-action:none}-.stage.drag{cursor:grabbing}-.stage svg{position:absolute;inset:0;width:100%;height:100%}-.pingroup,.pad{cursor:pointer}-.pingroup.hi .pinvis{stroke:var(--hi)!important;stroke-width:7}-rect.pad.hi{stroke:var(--hi);stroke-width:.15;paint-order:stroke}-.lyr-off{display:none}-#tip{position:fixed;z-index:99;pointer-events:none;display:none;max-width:250px;background:#0d1117;border:1px solid var(--acc);border-radius:8px;padding:7px 10px;box-shadow:0 8px 26px #000a}-#tip .tn{font:700 12px ui-monospace,monospace;color:var(--accb)}-#tip .tt{font-size:10px;text-transform:uppercase;letter-spacing:.04em;color:var(--mut);margin-top:1px}-#tip .td{font-size:11px;color:var(--ink);margin-top:5px;line-height:1.4}-</style></head><body>-<div class=bar><span class=h>Schematic symbol</span><span class=sp></span></div>-<div class=stage id=stage><svg xmlns='http://www.w3.org/2000/svg' viewBox='-750 -200 1500 400' style='width:100%;height:100%'><rect x='-500.0' y='-150.0' width='1000.0' height='300.0' fill='#e35d5d22' stroke='#e35d5d' stroke-width='4'/><g class='pingroup' data-num='1' data-name='GND'><line class='pinvis' x1='-700.0' y1='-50.0' x2='-500.0' y2='-50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-50.0' x2='-500.0' y2='-50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-5.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>1</text><text x='-470.0' y='-50.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>GND</text><g class='pingroup' data-num='2' data-name='VOUT'><line class='pinvis' x1='-700.0' y1='50.0' x2='-500.0' y2='50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='50.0' x2='-500.0' y2='50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='95.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>2</text><text x='-470.0' y='50.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>VOUT</text><g class='pingroup' data-num='3' data-name='VIN'><line class='pinvis' x1='700.0' y1='-50.0' x2='500.0' y2='-50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-50.0' x2='500.0' y2='-50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-95.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>3</text><text x='470.0' y='-50.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>VIN</text></svg></div>-<div id=tip></div>-<script>-var KIND="symbol", MPN="RAY/LD1117S25CTR", PINS=[{"desc":"","name":"GND","number":"1","type":""},{"desc":"","name":"VOUT","number":"2","type":""},{"desc":"","name":"VIN","number":"3","type":""}];-var byNum={}; PINS.forEach(function(p){byNum[String(p.number)]=p;});-var stage=document.getElementById('stage'), svg=stage.querySelector('svg'), tip=document.getElementById('tip');-// ---- pan/zoom -----var vb=(svg.getAttribute('viewBox')||'0 0 100 100').split(/\s+/).map(Number), base=vb.slice();-function setVB(){svg.setAttribute('viewBox',vb.join(' '));}-stage.addEventListener('wheel',function(e){e.preventDefault();var r=stage.getBoundingClientRect();var mx=(e.clientX-r.left)/r.width,my=(e.clientY-r.top)/r.height;var f=e.deltaY<0?0.88:1.14;var nw=vb[2]*f,nh=vb[3]*f;vb[0]+=(vb[2]-nw)*mx;vb[1]+=(vb[3]-nh)*my;vb[2]=nw;vb[3]=nh;setVB();},{passive:false});-var pan=null;-stage.addEventListener('pointerdown',function(e){pan={x:e.clientX,y:e.clientY};stage.classList.add('drag');stage.setPointerCapture(e.pointerId);});-stage.addEventListener('pointermove',function(e){if(!pan)return;var r=stage.getBoundingClientRect();vb[0]-=(e.clientX-pan.x)/r.width*vb[2];vb[1]-=(e.clientY-pan.y)/r.height*vb[3];pan={x:e.clientX,y:e.clientY};setVB();});-function endPan(){pan=null;stage.classList.remove('drag');}-stage.addEventListener('pointerup',endPan);stage.addEventListener('pointerleave',endPan);-stage.addEventListener('dblclick',function(){vb=base.slice();setVB();});-// ---- cross-highlight bus -----function els(n){return [].slice.call(document.querySelectorAll('[data-num="'+n+'"]'));}-function clearHi(){[].slice.call(document.querySelectorAll('.hi')).forEach(function(e){e.classList.remove('hi');});}-function hi(n){els(n).forEach(function(e){e.classList.add('hi');});}-function post(n){try{parent.postMessage({type:'lbr-hover',pin:n===null?null:String(n),mpn:MPN},'*');}catch(_){}}-function showTip(n,x,y){var p=byNum[String(n)];if(!p)return;tip.innerHTML='<span class=tn></span><div class=tt></div><div class=td></div>';tip.querySelector('.tn').textContent=n+'  '+(p.name||'');tip.querySelector('.tt').textContent=p.type||'';var d=p.desc||'';if(d)tip.querySelector('.td').textContent=d;else tip.querySelector('.td').style.display='none';tip.style.display='block';tip.style.left=(x+14)+'px';tip.style.top=(y+12)+'px';}-[].slice.call(document.querySelectorAll('.pingroup,.pad')).forEach(function(g){-  var n=g.getAttribute('data-num');-  g.addEventListener('mouseenter',function(e){clearHi();hi(n);post(n);showTip(n,e.clientX,e.clientY);});-  g.addEventListener('mousemove',function(e){tip.style.left=(e.clientX+14)+'px';tip.style.top=(e.clientY+12)+'px';});-  g.addEventListener('mouseleave',function(){clearHi();post(null);tip.style.display='none';});-});-window.addEventListener('message',function(e){var d=e.data||{};if(d.type!=='lbr-hover')return;clearHi();if(d.pin!=null)hi(d.pin);});-// ---- footprint layer toggles -----[].slice.call(document.querySelectorAll('.lyrtog')).forEach(function(b){-  function apply(on){[].slice.call(document.querySelectorAll('.ly-'+b.getAttribute('data-lyr'))).forEach(function(el){el.classList.toggle('lyr-off',!on);});}-  apply(b.classList.contains('on'));-  b.addEventListener('click',function(){apply(b.classList.toggle('on'));});-});-// ---- auto-grow the host readme iframe -----function ph(){var h=Math.max(360,Math.min(16000,document.body.scrollHeight||420));parent.postMessage({type:'readme-height',height:h},'*');}-window.addEventListener('load',ph);setTimeout(ph,300);-</script>-</body></html>+<!doctype html><title>ld1117s25ctr</title>\ No newline at end of file