main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs ld1117s25ctr: rebuilt as a full factory component page (was a placeholder) · Ray
viewers ld1117s25ctr: one-pass backfill (courtyard 63.36 -> 57.13 mm2 (margin 0.25, default), hero: page declares one already) · Ray
ld1117s25ctr-etched.fit.json ld1117s25ctr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ld1117s25ctr-etched.glb ld1117s25ctr: etch along the lead row, tab up; full MPN text (service-occt 1.9.3) (service-occt 1.6.0, from the plain S… · Ray
ld1117s25ctr-etched.step ld1117s25ctr: rebuilt as a full factory component page (was a placeholder) · Ray
ld1117s25ctr-hero.glb Publish 0.2.1 · Ray
ld1117s25ctr-hero.overlay.json Publish 0.2.1 · Ray
ld1117s25ctr.glb Publish 0.1.0 · Ray
ld1117s25ctr.kicad_mod ld1117s25ctr: one-pass backfill (courtyard 63.36 -> 57.13 mm2 (margin 0.25, default), hero: page declares one already) · Ray
ld1117s25ctr.kicad_sym Publish 0.2.0 · Ray
ld1117s25ctr.lbr ld1117s25ctr: one-pass backfill (courtyard 63.36 -> 57.13 mm2 (margin 0.25, default), hero: page declares one already) · Ray
ld1117s25ctr.step Publish 0.1.0 · Ray
package.json Publish 0.2.1 · Ray
page.json Publish 0.2.1 · Ray
README.md Publish 0.2.0 · Ray

LD1117S25CTR

STMicroelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223

LD1117S25CTR from STMicroelectronics, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ADJ/GND input ADJ/GND
2 VOUT power_out Regulated 2.5 V output pin. Delivers up to 800 mA. Requires a minimum 10 uF capacitor to ground for loop stability. Electrically tied to the SOT-223 TAB (heatsink pad). KiCad's SOT-223-3_TabPin2 joins the tab to this pad (Note: The TAB is connected to the VOUT).
3 VIN power_in Unregulated DC input. Absolute maximum 15 V (18 V when IOUT < 20 mA). Dropout is ~1 V typical, so VIN must exceed VOUT + 1 V under full load. A local input decoupling capacitor is recommended.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOT-223
Category PMIC
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage VO 2.45 2.5 2.55 V Vin = 4.5 V, IO = 10 mA, TJ = 25 °C 17
Output voltage VO 2.4 2.6 V IO = 0 to 800 mA, Vin = 3.9 to 10 V 17
Line regulation ∆VO 1 30 mV Vin = 3.9 to 10 V, IO = 0 mA 17
Load regulation ∆VO 1 30 mV Vin = 3.9 V, IO = 0 to 800 mA 17
Temperature stability ∆VO 0.5 % 17
Long term stability ∆VO 0.3 % 1000 hrs, TJ = 125 °C 17
Operating input voltage Vin 15 V IO = 100 mA 17
Quiescent current Id 5 10 mA Vin ≤ 10 V 17
Output current IO 800 950 1300 mA Vin = 7.5 V TJ = 25 °C 17
Supply voltage rejection SVR 60 75 dB IO = 40 mA, f = 120 Hz, TJ = 25 °C, Vin = 5.5 V, Vripple = 1 VPP 17
Dropout voltage Vd 1 1.1 V IO = 100 mA, TJ = 0 to 125 °C 17
Dropout voltage Vd 1.05 1.15 V IO = 500 mA, TJ = 0 to 125 °C 17
Dropout voltage Vd 1.1 1.2 V IO = 800 mA, TJ = 0 to 125 °C 17
Dropout voltage Vd 1.1 V IO = 100 mA 17
Dropout voltage Vd 1.2 V IO = 500 mA 17
Dropout voltage Vd 1.3 V IO = 800 mA 17
Thermal regulation 0.01 0.1 %/W Ta = 25 °C, 30 ms Pulse 17
Storage temperature range TSTG -40 150 °C 7
DC input voltage VIN 15 V 7
Power dissipation PTOT 12 W 7
Operating junction temperature range TOP -40 125 °C for C version 7
Output noise voltage eN 100 µV B = 10 Hz to 10 kHz, TJ = 25 °C 17
Thermal resistance junction-case RthJC 15 °C/W SOT-223 package 7
Thermal resistance junction-ambient RthJA 110 °C/W SOT-223 package 7

CAD (KiCad official)

  • Symbol: LD1117S25CTR
  • Footprint: Package_TO_SOT_SMD:SOT-223-3_TabPin2
  • 3D model: SOT-223 (KiCad packages3D, STEP)
  • 3D model files: ld1117s25ctr-etched.step / ld1117s25ctr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ld1117s25ctr.step / ld1117s25ctr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (46 pp, sha256 4fd8415a20d932fd, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF