component
L6470HTR
Public Made by Adomby adom
STMicroelectronics Stepper Motor Driver, HTSSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
l6470htr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
3e364a5
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334
{
"schema_version": 1,
"type": "component",
"slug": "l6470htr",
"title": "L6470HTR",
"brief": "STMicroelectronics Stepper Motor Driver, HTSSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"motor driver ics",
"l6470htr",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "L6470HTR",
"manufacturer": "STMicroelectronics",
"package": "HTSSOP-28",
"pin_count": 29,
"category": "Motor Driver ICs",
"subcategory": "Stepper Motor Driver",
"datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884110563004416",
"parts": {
"symbol": "l6470htr.kicad_sym",
"footprint": "l6470htr.kicad_mod",
"model_3d": "l6470htr-etched.glb",
"model_3d_plain": "l6470htr.glb",
"model_3d_step": "l6470htr-etched.step",
"model_3d_step_plain": "l6470htr.step",
"lbr": "l6470htr.lbr"
},
"distributor_links": {
"lcsc": "C182381"
},
"pins": [
{
"number": "1",
"name": "OUT1A",
"type": "power_out",
"description": "Full bridge A phase output 1 capable of sourcing or sinking up to 7 A peak current with programmable slew rate control."
},
{
"number": "2",
"name": "VSA",
"type": "power_in",
"description": "Full bridge A power supply input pin requiring 8-45 V supply voltage and must be connected to VSB."
},
{
"number": "3",
"name": "STBY\\RST",
"type": "input",
"description": "Active-low standby and reset pin that resets logic and disables charge pump when driven low; must be connected to VDD if not used."
},
{
"number": "4",
"name": "SW",
"type": "input",
"description": "External switch input pin with internal 60-110 kΩ pull-up resistor for user-defined interrupt control; must be connected to VDD if not used."
},
{
"number": "5",
"name": "ADCIN",
"type": "input",
"description": "Integrated analog-to-digital converter input pin accepting 0-VREG voltage range with 5-bit resolution sampled at PWM frequency."
},
{
"number": "6",
"name": "VREG",
"type": "power_in",
"description": "Internal 3 V voltage regulator output and external 3.3 V logic supply pin capable of sourcing 40 mA with 50 mV maximum dropout; requires 22-47 µF bypass capacitor."
},
{
"number": "7",
"name": "OSCIN",
"type": "input",
"description": "Oscillator input pin for connecting external crystal/resonator (8-32 MHz) or direct clock source; leave floating if using internal oscillator."
},
{
"number": "8",
"name": "OSCOUT",
"type": "output",
"description": "Oscillator output pin providing 2/4/8/16 MHz clock from internal oscillator or crystal/resonator driving capability with 4 mA maximum output current."
},
{
"number": "9",
"name": "AGND",
"type": "power_in",
"description": "Analog ground reference pin internally connected to PGND and DGND; differential voltage between AGND and DGND must not exceed ±0.3 V."
},
{
"number": "10",
"name": "CP",
"type": "output",
"description": "Charge pump oscillator output pin supplying signal for external charge pump circuit with 660-800 kHz oscillation frequency."
},
{
"number": "11",
"name": "VBOOT",
"type": "power_in",
"description": "Bootstrap voltage supply pin (maximum 55 V) for high-side gate drivers requiring 1.1-1.4 mA average charging current."
},
{
"number": "12",
"name": "VSB",
"type": "power_in",
"description": "Full bridge B power supply input pin requiring 8-45 V supply voltage and must be connected to VSA."
},
{
"number": "13",
"name": "PGND",
"type": "power_in",
"description": "Power ground reference pin for motor output stage; differential voltage between PGND and DGND must not exceed ±0.3 V."
},
{
"number": "14",
"name": "OUT1B",
"type": "power_out",
"description": "Full bridge B phase output 1 capable of sourcing or sinking up to 7 A peak current with programmable slew rate control."
},
{
"number": "15",
"name": "OUT2B",
"type": "power_out",
"description": "Full bridge B phase output 2 capable of sourcing or sinking up to 7 A peak current with programmable slew rate control."
},
{
"number": "16",
"name": "VSB",
"type": "power_in",
"description": "Full bridge B power supply input pin requiring 8-45 V supply voltage and must be connected to VSA; duplicate connection for current distribution."
},
{
"number": "17",
"name": "VDD",
"type": "power_in",
"description": "Logic power supply voltage (3.3 V or 5 V) for output driver pull-up reference; requires 10 µF bypass capacitor for proper operation."
},
{
"number": "18",
"name": "SDO",
"type": "output",
"description": "SPI serial data output pin with 0.3 V maximum low voltage and 2.4 V minimum high voltage at 3.3 V VDD; maximum drive current 4 mA."
},
{
"number": "19",
"name": "CK",
"type": "input",
"description": "SPI serial clock input pin (TTL/CMOS compatible, 3.3-5 V logic levels) with maximum frequency 5 MHz and 0.8-2 V logic thresholds."
},
{
"number": "20",
"name": "SDI",
"type": "input",
"description": "SPI serial data input pin (TTL/CMOS compatible, 3.3-5 V logic levels) sampled on CK rising edges with 25 ns setup and 20 ns hold time."
},
{
"number": "21",
"name": "DGND",
"type": "power_in",
"description": "Digital ground reference pin for logic circuitry; differential voltage between DGND and AGND must not exceed ±0.3 V."
},
{
"number": "22",
"name": "BUSY\\SYNC",
"type": "tri_state",
"description": "Open-drain output pin functioning as busy flag (pulled low during command execution) or synchronization clock signal based on SYNC_EN bit."
},
{
"number": "23",
"name": "CS",
"type": "input",
"description": "SPI chip select input pin (active low, TTL/CMOS compatible) with 335-565 kΩ internal pull-up resistance and 350 ns setup time."
},
{
"number": "24",
"name": "FLAG",
"type": "tri_state",
"description": "Open-drain output pin (active low) for alarm condition signaling on overcurrent, thermal shutdown/warning, UVLO, stall detection, switch events, or command errors."
},
{
"number": "25",
"name": "STCK",
"type": "input",
"description": "Step-clock input pin (TTL/CMOS compatible, 3.3-5 V logic levels) for external pulse counting mode with maximum input frequency 2 MHz."
},
{
"number": "26",
"name": "VSA",
"type": "power_in",
"description": "Full bridge A power supply input pin requiring 8-45 V supply voltage and must be connected to VSB; duplicate connection for current distribution."
},
{
"number": "27",
"name": "PGND",
"type": "power_in",
"description": "Power ground reference pin for motor output stage; differential voltage between PGND and DGND must not exceed ±0.3 V; duplicate connection for current distribution."
},
{
"number": "28",
"name": "OUT2A",
"type": "power_out",
"description": "Full bridge A phase output 2 capable of sourcing or sinking up to 7 A peak current with programmable slew rate control."
},
{
"number": "29",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.2",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.2",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"exposed pad 29 added from the footprint",
"dropped thermal pad ['EP'] absent from footprint"
],
"pages_sent": 73,
"cost_usd": 0.6366,
"at": "2026-09-23T09:42:35"
},
"datasheet": {
"url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884110563004416",
"pages": 73,
"sha256": "4b94ab59eec71372",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 29,
"described": 29,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "l6470htr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.2,
9.7,
1.05
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "ff242f1d3be9d09e7f929707a2c5b1ee974a4f882053b04bcdb1cd2cb21223ef",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "l6470htr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.2,
9.7,
1.05
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "9be261c29e8026a1fba8297af15217f493fcf1e69ab02bb0e0d91f918d881961",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "STMicroelectronics",
"Package": "HTSSOP-28",
"Category": "Motor Driver ICs",
"Pins": "29"
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"l6470htr"
],
"discovery_pitch": "L6470HTR (STMicroelectronics) component page with datasheet-verified CAD.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"l6470htr.kicad_sym",
"l6470htr.kicad_mod",
"l6470htr.glb",
"l6470htr.step",
"l6470htr.lbr",
"docs/hero.png",
"docs/l6470htr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"visibility": {
"public": true
},
"updated_at": "2026-09-24T23:28:31.800Z"
}