component
L6470HTR
Public Made by Adomby adom
STMicroelectronics Stepper Motor Driver, HTSSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
l6470htr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+92−12
package.json+50−10@@ -71,7 +71,7 @@ "number": "4", "name": "SW", "type": "input",- "description": "External switch input pin with internal 60-110 k\u03a9 pull-up resistor for user-defined interrupt control; must be connected to VDD if not used."+ "description": "External switch input pin with internal 60-110 kΩ pull-up resistor for user-defined interrupt control; must be connected to VDD if not used." }, { "number": "5",@@ -83,7 +83,7 @@ "number": "6", "name": "VREG", "type": "power_in",- "description": "Internal 3 V voltage regulator output and external 3.3 V logic supply pin capable of sourcing 40 mA with 50 mV maximum dropout; requires 22-47 \u00b5F bypass capacitor."+ "description": "Internal 3 V voltage regulator output and external 3.3 V logic supply pin capable of sourcing 40 mA with 50 mV maximum dropout; requires 22-47 µF bypass capacitor." }, { "number": "7",@@ -101,7 +101,7 @@ "number": "9", "name": "AGND", "type": "power_in",- "description": "Analog ground reference pin internally connected to PGND and DGND; differential voltage between AGND and DGND must not exceed \u00b10.3 V."+ "description": "Analog ground reference pin internally connected to PGND and DGND; differential voltage between AGND and DGND must not exceed ±0.3 V." }, { "number": "10",@@ -125,7 +125,7 @@ "number": "13", "name": "PGND", "type": "power_in",- "description": "Power ground reference pin for motor output stage; differential voltage between PGND and DGND must not exceed \u00b10.3 V."+ "description": "Power ground reference pin for motor output stage; differential voltage between PGND and DGND must not exceed ±0.3 V." }, { "number": "14",@@ -149,7 +149,7 @@ "number": "17", "name": "VDD", "type": "power_in",- "description": "Logic power supply voltage (3.3 V or 5 V) for output driver pull-up reference; requires 10 \u00b5F bypass capacitor for proper operation."+ "description": "Logic power supply voltage (3.3 V or 5 V) for output driver pull-up reference; requires 10 µF bypass capacitor for proper operation." }, { "number": "18",@@ -173,7 +173,7 @@ "number": "21", "name": "DGND", "type": "power_in",- "description": "Digital ground reference pin for logic circuitry; differential voltage between DGND and AGND must not exceed \u00b10.3 V."+ "description": "Digital ground reference pin for logic circuitry; differential voltage between DGND and AGND must not exceed ±0.3 V." }, { "number": "22",@@ -185,7 +185,7 @@ "number": "23", "name": "CS", "type": "input",- "description": "SPI chip select input pin (active low, TTL/CMOS compatible) with 335-565 k\u03a9 internal pull-up resistance and 350 ns setup time."+ "description": "SPI chip select input pin (active low, TTL/CMOS compatible) with 335-565 kΩ internal pull-up resistance and 350 ns setup time." }, { "number": "24",@@ -209,7 +209,7 @@ "number": "27", "name": "PGND", "type": "power_in",- "description": "Power ground reference pin for motor output stage; differential voltage between PGND and DGND must not exceed \u00b10.3 V; duplicate connection for current distribution."+ "description": "Power ground reference pin for motor output stage; differential voltage between PGND and DGND must not exceed ±0.3 V; duplicate connection for current distribution." }, { "number": "28",@@ -259,6 +259,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "l6470htr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.2,+ 9.7,+ 1.05+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "ff242f1d3be9d09e7f929707a2c5b1ee974a4f882053b04bcdb1cd2cb21223ef",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "l6470htr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.2,+ 9.7,+ 1.05+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "9be261c29e8026a1fba8297af15217f493fcf1e69ab02bb0e0d91f918d881961",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -244,7 +244,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "l6470htr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.2,+ 9.7,+ 1.05+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "ff242f1d3be9d09e7f929707a2c5b1ee974a4f882053b04bcdb1cd2cb21223ef",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "l6470htr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.2,+ 9.7,+ 1.05+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "9be261c29e8026a1fba8297af15217f493fcf1e69ab02bb0e0d91f918d881961",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -292,4 +332,4 @@ "public": true }, "updated_at": "2026-09-24T23:28:31.800Z"-}+}