main
Ray l6470htr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 3e364a5
{
  "slug": "l6470htr",
  "version": "0.1.0",
  "type": "component",
  "description": "STMicroelectronics Stepper Motor Driver, HTSSOP-28. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "motor driver ics",
    "l6470htr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "l6470htr.kicad_sym",
    "l6470htr.kicad_mod",
    "l6470htr.glb",
    "l6470htr.step",
    "l6470htr.lbr",
    "docs/hero.png",
    "docs/l6470htr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "L6470HTR",
    "manufacturer": "STMicroelectronics",
    "package": "HTSSOP-28",
    "pin_count": 29,
    "category": "Motor Driver ICs",
    "subcategory": "Stepper Motor Driver",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884110563004416",
    "parts": {
      "symbol": "l6470htr.kicad_sym",
      "footprint": "l6470htr.kicad_mod",
      "model_3d": "l6470htr-etched.glb",
      "model_3d_plain": "l6470htr.glb",
      "model_3d_step": "l6470htr-etched.step",
      "model_3d_step_plain": "l6470htr.step",
      "lbr": "l6470htr.lbr"
    },
    "distributor_links": {
      "lcsc": "C182381"
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT1A",
        "type": "power_out",
        "description": "Full bridge A phase output 1 capable of sourcing or sinking up to 7 A peak current with programmable slew rate control."
      },
      {
        "number": "2",
        "name": "VSA",
        "type": "power_in",
        "description": "Full bridge A power supply input pin requiring 8-45 V supply voltage and must be connected to VSB."
      },
      {
        "number": "3",
        "name": "STBY\\RST",
        "type": "input",
        "description": "Active-low standby and reset pin that resets logic and disables charge pump when driven low; must be connected to VDD if not used."
      },
      {
        "number": "4",
        "name": "SW",
        "type": "input",
        "description": "External switch input pin with internal 60-110 kΩ pull-up resistor for user-defined interrupt control; must be connected to VDD if not used."
      },
      {
        "number": "5",
        "name": "ADCIN",
        "type": "input",
        "description": "Integrated analog-to-digital converter input pin accepting 0-VREG voltage range with 5-bit resolution sampled at PWM frequency."
      },
      {
        "number": "6",
        "name": "VREG",
        "type": "power_in",
        "description": "Internal 3 V voltage regulator output and external 3.3 V logic supply pin capable of sourcing 40 mA with 50 mV maximum dropout; requires 22-47 µF bypass capacitor."
      },
      {
        "number": "7",
        "name": "OSCIN",
        "type": "input",
        "description": "Oscillator input pin for connecting external crystal/resonator (8-32 MHz) or direct clock source; leave floating if using internal oscillator."
      },
      {
        "number": "8",
        "name": "OSCOUT",
        "type": "output",
        "description": "Oscillator output pin providing 2/4/8/16 MHz clock from internal oscillator or crystal/resonator driving capability with 4 mA maximum output current."
      },
      {
        "number": "9",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground reference pin internally connected to PGND and DGND; differential voltage between AGND and DGND must not exceed ±0.3 V."
      },
      {
        "number": "10",
        "name": "CP",
        "type": "output",
        "description": "Charge pump oscillator output pin supplying signal for external charge pump circuit with 660-800 kHz oscillation frequency."
      },
      {
        "number": "11",
        "name": "VBOOT",
        "type": "power_in",
        "description": "Bootstrap voltage supply pin (maximum 55 V) for high-side gate drivers requiring 1.1-1.4 mA average charging current."
      },
      {
        "number": "12",
        "name": "VSB",
        "type": "power_in",
        "description": "Full bridge B power supply input pin requiring 8-45 V supply voltage and must be connected to VSA."
      },
      {
        "number": "13",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground reference pin for motor output stage; differential voltage between PGND and DGND must not exceed ±0.3 V."
      },
      {
        "number": "14",
        "name": "OUT1B",
        "type": "power_out",
        "description": "Full bridge B phase output 1 capable of sourcing or sinking up to 7 A peak current with programmable slew rate control."
      },
      {
        "number": "15",
        "name": "OUT2B",
        "type": "power_out",
        "description": "Full bridge B phase output 2 capable of sourcing or sinking up to 7 A peak current with programmable slew rate control."
      },
      {
        "number": "16",
        "name": "VSB",
        "type": "power_in",
        "description": "Full bridge B power supply input pin requiring 8-45 V supply voltage and must be connected to VSA; duplicate connection for current distribution."
      },
      {
        "number": "17",
        "name": "VDD",
        "type": "power_in",
        "description": "Logic power supply voltage (3.3 V or 5 V) for output driver pull-up reference; requires 10 µF bypass capacitor for proper operation."
      },
      {
        "number": "18",
        "name": "SDO",
        "type": "output",
        "description": "SPI serial data output pin with 0.3 V maximum low voltage and 2.4 V minimum high voltage at 3.3 V VDD; maximum drive current 4 mA."
      },
      {
        "number": "19",
        "name": "CK",
        "type": "input",
        "description": "SPI serial clock input pin (TTL/CMOS compatible, 3.3-5 V logic levels) with maximum frequency 5 MHz and 0.8-2 V logic thresholds."
      },
      {
        "number": "20",
        "name": "SDI",
        "type": "input",
        "description": "SPI serial data input pin (TTL/CMOS compatible, 3.3-5 V logic levels) sampled on CK rising edges with 25 ns setup and 20 ns hold time."
      },
      {
        "number": "21",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital ground reference pin for logic circuitry; differential voltage between DGND and AGND must not exceed ±0.3 V."
      },
      {
        "number": "22",
        "name": "BUSY\\SYNC",
        "type": "tri_state",
        "description": "Open-drain output pin functioning as busy flag (pulled low during command execution) or synchronization clock signal based on SYNC_EN bit."
      },
      {
        "number": "23",
        "name": "CS",
        "type": "input",
        "description": "SPI chip select input pin (active low, TTL/CMOS compatible) with 335-565 kΩ internal pull-up resistance and 350 ns setup time."
      },
      {
        "number": "24",
        "name": "FLAG",
        "type": "tri_state",
        "description": "Open-drain output pin (active low) for alarm condition signaling on overcurrent, thermal shutdown/warning, UVLO, stall detection, switch events, or command errors."
      },
      {
        "number": "25",
        "name": "STCK",
        "type": "input",
        "description": "Step-clock input pin (TTL/CMOS compatible, 3.3-5 V logic levels) for external pulse counting mode with maximum input frequency 2 MHz."
      },
      {
        "number": "26",
        "name": "VSA",
        "type": "power_in",
        "description": "Full bridge A power supply input pin requiring 8-45 V supply voltage and must be connected to VSB; duplicate connection for current distribution."
      },
      {
        "number": "27",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground reference pin for motor output stage; differential voltage between PGND and DGND must not exceed ±0.3 V; duplicate connection for current distribution."
      },
      {
        "number": "28",
        "name": "OUT2A",
        "type": "power_out",
        "description": "Full bridge A phase output 2 capable of sourcing or sinking up to 7 A peak current with programmable slew rate control."
      },
      {
        "number": "29",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "exposed pad 29 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 73,
        "cost_usd": 0.6366,
        "at": "2026-09-23T09:42:35"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884110563004416",
        "pages": 73,
        "sha256": "4b94ab59eec71372",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 29,
        "described": 29,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "l6470htr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.2,
          9.7,
          1.05
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "ff242f1d3be9d09e7f929707a2c5b1ee974a4f882053b04bcdb1cd2cb21223ef",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "l6470htr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.2,
          9.7,
          1.05
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "9be261c29e8026a1fba8297af15217f493fcf1e69ab02bb0e0d91f918d881961",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}