main
Ray ksz8851-16mlli: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 684424b
{
  "schema_version": 1,
  "type": "component",
  "slug": "ksz8851-16mlli",
  "title": "KSZ8851-16MLLI",
  "brief": "Microchip Tech Ethernet Controllers, LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "interface",
    "ksz8851-16mlli",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "KSZ8851-16MLLI",
    "manufacturer": "Microchip Tech",
    "package": "LQFP-48(7x7)",
    "pin_count": 48,
    "category": "Interface",
    "subcategory": "Ethernet Controllers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586184784834281472",
    "parts": {
      "symbol": "ksz8851-16mlli.kicad_sym",
      "footprint": "ksz8851-16mlli.kicad_mod",
      "model_3d": "ksz8851-16mlli-etched.glb",
      "model_3d_plain": "ksz8851-16mlli.glb",
      "model_3d_step": "ksz8851-16mlli-etched.step",
      "model_3d_step_plain": "ksz8851-16mlli.step",
      "lbr": "ksz8851-16mlli.lbr"
    },
    "distributor_links": {
      "lcsc": "C220270"
    },
    "pins": [
      {
        "number": "1",
        "name": "P1LED1",
        "type": "output",
        "description": "Programmable LED output indicating port activity or 100 Mbps speed (LED ON=LOW), used for 16-/8-bit bus mode selection during power-up/reset where no connect or pull-up selects 16-bit mode and pull-down selects 8-bit mode."
      },
      {
        "number": "2",
        "name": "P1LED0",
        "type": "output",
        "description": "Programmable LED output indicating link status or link/activity (LED ON=LOW) per Chip Global Control Register CGCR bit 9 setting."
      },
      {
        "number": "3",
        "name": "PME",
        "type": "output",
        "description": "Power Management Event output (active low or high per PMECR[12]) asserted when wake-on-LAN events are detected (energy, linkup, magic packet, or wake-up frame)."
      },
      {
        "number": "4",
        "name": "INTRN",
        "type": "output",
        "description": "Interrupt output (active low) to host CPU requiring external 4.7 kΩ pull-up resistor when an interrupt status bit is set."
      },
      {
        "number": "5",
        "name": "RDN",
        "type": "input",
        "description": "Asynchronous read strobe input (active low) indicating a read cycle with data valid 24-32 ns after RDN activation."
      },
      {
        "number": "6",
        "name": "WRN",
        "type": "input",
        "description": "Asynchronous write strobe input (active low) indicating a write cycle requiring minimum 40 ns active time."
      },
      {
        "number": "7",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital ground reference."
      },
      {
        "number": "8",
        "name": "VDD_CO1.8",
        "type": "power_out",
        "description": "1.8V regulator output providing power to VDD_A1.8 and VDD_D1.8 pins or left floating if external 1.8V supply is tied to VDD_IO pins."
      },
      {
        "number": "9",
        "name": "EED_IO",
        "type": "bidirectional",
        "description": "EEPROM serial data I/O line for external EEPROM communication with internal pull-down during power-up/reset, latched to indicate EEPROM presence (pull-up=present, no connect/pull-down=absent)."
      },
      {
        "number": "10",
        "name": "EESK",
        "type": "output",
        "description": "EEPROM serial clock output (4 μs or 800 ns cycle at 25 MHz or 125 MHz respectively) with internal pull-down during power-up/reset, latched for endian mode selection (pull-up=big endian, no connect/pull-down=little endian)."
      },
      {
        "number": "11",
        "name": "CMD",
        "type": "input",
        "description": "Command type input selecting shared data bus access where low selects data access and high selects address/byte-enable access."
      },
      {
        "number": "12",
        "name": "CSN",
        "type": "input",
        "description": "Chip select input (active low) enabling shared data bus access for read or write operations."
      },
      {
        "number": "13",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground reference."
      },
      {
        "number": "14",
        "name": "VDD_A1.8",
        "type": "power_in",
        "description": "1.8V analog power supply from VDD_CO1.8 or external source (if VDD_IO=1.8V) requiring appropriate filtering capacitors."
      },
      {
        "number": "15",
        "name": "EECS",
        "type": "output",
        "description": "EEPROM chip select output (active low) for selecting external EEPROM device during serial communication."
      },
      {
        "number": "16",
        "name": "RXP1",
        "type": "input",
        "description": "Port 1 differential receive signal (positive input) from isolation transformer for 10BASE-T/100BASE-TX physical layer."
      },
      {
        "number": "17",
        "name": "RXM1",
        "type": "input",
        "description": "Port 1 differential receive signal (negative input) from isolation transformer for 10BASE-T/100BASE-TX physical layer."
      },
      {
        "number": "18",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground reference."
      },
      {
        "number": "19",
        "name": "TXP1",
        "type": "output",
        "description": "Port 1 differential transmit signal (positive output) to isolation transformer with ±0.95V to ±1.05V peak differential voltage at 100Ω termination."
      },
      {
        "number": "20",
        "name": "TXM1",
        "type": "output",
        "description": "Port 1 differential transmit signal (negative output) to isolation transformer with ±0.95V to ±1.05V peak differential voltage at 100Ω termination."
      },
      {
        "number": "21",
        "name": "VDD_A3.3",
        "type": "power_in",
        "description": "3.3V analog power supply input requiring appropriate decoupling capacitors."
      },
      {
        "number": "22",
        "name": "ISET",
        "type": "output",
        "description": "Transmit output current setting pin pulled to ground with 3.01 kΩ 1% resistor to set MAU current level."
      },
      {
        "number": "23",
        "name": "RSTN",
        "type": "input",
        "description": "Hardware reset input (active low) requiring minimum 10 ms low pulse after stable 3.3V supply voltage for proper device initialization."
      },
      {
        "number": "24",
        "name": "X1",
        "type": "input",
        "description": "25 MHz crystal or 3.3V oscillator input (±50 ppm tolerance required) for system clock generation."
      },
      {
        "number": "25",
        "name": "X2",
        "type": "output",
        "description": "25 MHz crystal output connection or no-connect if external oscillator is used for X1."
      },
      {
        "number": "26",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital ground reference."
      },
      {
        "number": "27",
        "name": "VDD_IO",
        "type": "power_in",
        "description": "3.3V, 2.5V, or 1.8V digital I/O power supply input for CPU interface logic requiring appropriate decoupling capacitors."
      },
      {
        "number": "28",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital ground reference."
      },
      {
        "number": "29",
        "name": "VDD_D1.8",
        "type": "power_in",
        "description": "1.8V digital core power supply from VDD_CO1.8 or external source (if VDD_IO=1.8V) requiring appropriate filtering."
      },
      {
        "number": "30",
        "name": "SD15",
        "type": "bidirectional",
        "description": "Shared data bus bit 15 for data access when CMD=0; byte enable 3 (BE3, 4th byte enable, active high) when CMD=1 in 16-bit mode; must be tied to GND in 8-bit mode."
      },
      {
        "number": "31",
        "name": "SD14",
        "type": "bidirectional",
        "description": "Shared data bus bit 14 for data access when CMD=0; byte enable 2 (BE2, 3rd byte enable, active high) when CMD=1 in 16-bit mode; must be tied to GND in 8-bit mode."
      },
      {
        "number": "32",
        "name": "SD13",
        "type": "bidirectional",
        "description": "Shared data bus bit 13 for data access when CMD=0; byte enable 1 (BE1, 2nd byte enable, active high) when CMD=1 in 16-bit mode; must be tied to GND in 8-bit mode."
      },
      {
        "number": "33",
        "name": "SD12",
        "type": "bidirectional",
        "description": "Shared data bus bit 12 for data access when CMD=0; byte enable 0 (BE0, 1st byte enable, active high) when CMD=1 in 16-bit mode; must be tied to GND in 8-bit mode."
      },
      {
        "number": "34",
        "name": "SD11",
        "type": "bidirectional",
        "description": "Shared data bus bit 11 for data D11 access when CMD=0, do-not-care when CMD=1 in 16-bit mode; must be tied to GND in 8-bit mode."
      },
      {
        "number": "35",
        "name": "SD10",
        "type": "bidirectional",
        "description": "Shared data bus bit 10 for data D10 access when CMD=0, do-not-care when CMD=1 in 16-bit mode; must be tied to GND in 8-bit mode."
      },
      {
        "number": "36",
        "name": "SD9",
        "type": "bidirectional",
        "description": "Shared data bus bit 9 for data D9 access when CMD=0, do-not-care when CMD=1 in 16-bit mode; must be tied to GND in 8-bit mode."
      },
      {
        "number": "37",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital ground reference."
      },
      {
        "number": "38",
        "name": "VDD_IO",
        "type": "power_in",
        "description": "3.3V, 2.5V, or 1.8V digital I/O power supply input for CPU interface logic requiring appropriate decoupling capacitors."
      },
      {
        "number": "39",
        "name": "SD8",
        "type": "bidirectional",
        "description": "Shared data bus bit 8 for data D8 access when CMD=0, do-not-care when CMD=1; must be tied to GND in 8-bit mode."
      },
      {
        "number": "40",
        "name": "SD7",
        "type": "bidirectional",
        "description": "Shared data bus bit 7 for data D7 access when CMD=0, address A7 access when CMD=1 in both 8-bit and 16-bit modes."
      },
      {
        "number": "41",
        "name": "SD6",
        "type": "bidirectional",
        "description": "Shared data bus bit 6 for data D6 access when CMD=0, address A6 access when CMD=1 in both 8-bit and 16-bit modes."
      },
      {
        "number": "42",
        "name": "SD5",
        "type": "bidirectional",
        "description": "Shared data bus bit 5 for data D5 access when CMD=0, address A5 access when CMD=1 in both 8-bit and 16-bit modes."
      },
      {
        "number": "43",
        "name": "SD4",
        "type": "bidirectional",
        "description": "Shared data bus bit 4 for data D4 access when CMD=0, address A4 access when CMD=1 in both 8-bit and 16-bit modes."
      },
      {
        "number": "44",
        "name": "SD3",
        "type": "bidirectional",
        "description": "Shared data bus bit 3 for data D3 access when CMD=0, address A3 access when CMD=1 in both 8-bit and 16-bit modes."
      },
      {
        "number": "45",
        "name": "SD2",
        "type": "bidirectional",
        "description": "Shared data bus bit 2 for data D2 access when CMD=0, address A2 access when CMD=1 in both 8-bit and 16-bit modes."
      },
      {
        "number": "46",
        "name": "VDD_IO",
        "type": "power_in",
        "description": "3.3V, 2.5V, or 1.8V digital I/O power supply input for CPU interface logic requiring appropriate decoupling capacitors."
      },
      {
        "number": "47",
        "name": "SD1",
        "type": "bidirectional",
        "description": "Shared data bus bit 1 for data D1 access when CMD=0; address A1 access when CMD=1 in 8-bit mode, do-not-care when CMD=1 in 16-bit mode."
      },
      {
        "number": "48",
        "name": "SD0",
        "type": "bidirectional",
        "description": "Shared data bus bit 0 for data D0 access when CMD=0; address A0 access when CMD=1 in 8-bit mode, do-not-care when CMD=1 in 16-bit mode."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: RXP1 and RXM1 (pins 16-17) are listed as I/O in datasheet buffer type but function as differential r; P1LED1 (pin 1) is listed as IPU/O with internal pull-up during power-up/reset, used for bus mode sel; EESK (pin 10) is listed as IPD/O with internal pull-down during power-up/reset for endian selection,"
        ],
        "pages_sent": 85,
        "cost_usd": 1.0273,
        "at": "2026-09-18T06:08:14"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586184784834281472",
        "pages": 85,
        "sha256": "48923de9b6d88788",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 48,
        "described": 48,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ksz8851-16mlli.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9,
          9,
          1.5
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "9dea352d93177c2904afd7d7b68ea8855ce1ab691f69f8b3e13655600514b6bf",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ksz8851-16mlli-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9,
          9,
          1.5
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "29c69d583aa15dc9a6e79b4c3c28cf83fbe9ef29014a5405dec5c03601eaa244",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Microchip Tech",
      "Package": "LQFP-48(7x7)",
      "Category": "Interface",
      "Pins": "48"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "ksz8851-16mlli"
  ],
  "discovery_pitch": "KSZ8851-16MLLI (Microchip Tech) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ksz8851-16mlli.kicad_sym",
    "ksz8851-16mlli.kicad_mod",
    "ksz8851-16mlli.glb",
    "ksz8851-16mlli.step",
    "ksz8851-16mlli.lbr",
    "docs/hero.png",
    "docs/ksz8851-16mlli-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-24T23:25:09.516Z"
}