main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.1 · Ray
viewers isl81805frtz-t: viewers rendered from the public page · Ray
isl81805frtz-t-etched.glb isl81805frtz-t: factory component page (tier=mfr) · Ray
isl81805frtz-t-etched.step isl81805frtz-t: factory component page (tier=mfr) · Ray
isl81805frtz-t-hero.glb isl81805frtz-t: hero GLB from the etched model (keeps the MPN mark) · Ray
isl81805frtz-t-hero.overlay.json isl81805frtz-t: hero GLB from the etched model (keeps the MPN mark) · Ray
isl81805frtz-t.glb Publish 0.1.1 · Ray
isl81805frtz-t.kicad_mod Publish 0.1.0 · Ray
isl81805frtz-t.kicad_sym Publish 0.1.1 · Ray
isl81805frtz-t.lbr Publish 0.1.1 · Ray
isl81805frtz-t.step Publish 0.1.1 · Ray
package.json Publish 0.1.1 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.1 · Ray
verification.json Verified: Rebuilt by the parts factory: tier mfr, 33 pins · Ray

ISL81805FRTZ-T

RENESAS · DC-DC Converters · TQFN-32(5x5)

ISL81805FRTZ-T from RENESAS, in a TQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 COMP1 output Channel 1 voltage error GM amplifier output that sets the inner current-loop reference, and the PWM duty cycle reduces to 0% when the pin is pulled below 1V.
2 SS/TRK1 passive Channel 1 soft-start or track pin, where a regulated 2µA source charges the soft-start capacitor to set the output ramp, or an external master rail is applied through a resistor divider for tracking.
3 VCC5V power_out Output of the internal 5V linear regulator that biases the IC, which must be decoupled to SGND with a minimum 4.7µF ceramic capacitor placed close to the pin.
4 NC unconnected No connection pin.
5 RT/SYNC input A resistor to ground sets the default switching frequency from 100kHz to 1MHz, where an open or VCC5V connection gives 120kHz, GND gives 575kHz, and an applied external clock synchronizes the internal oscillator.
6 PLL_COMP passive Compensation pin for the internal PLL, where RPLL 2.7kΩ, CPLL1 10nF and CPLL2 820pF are recommended.
7 CLKOUT/DITHER bidirectional Dual-function pin that outputs a clock to synchronize other ISL81805 devices when no capacitor is connected, or enables frequency dither of about ±15% when a capacitor is connected.
8 SS/TRK2/OV bidirectional Channel 2 soft-start or track pin with a regulated 2µA charge current, which carries the OVP trip signal instead in dual-phase operation.
9 COMP2/CLKEN bidirectional Channel 2 voltage error GM amplifier output where the PWM duty cycle reduces to 0% when the pin is pulled below 1.1V, and in dual-phase use it carries the PFM OFF (CLKEN) signal.
10 FB2/BSTEN bidirectional Channel 2 output voltage feedback input regulated to the internal 0.8V reference, which carries the Burst enable (BSTEN) signal in dual-phase operation.
11 IMON2 passive Channel 2 input current monitor whose pin voltage reaches 1.2V for the average current limit, and a voltage above 3V selects single-output dual-phase mode.
12 EN/UVLO2 input Channel 2 enable and accurate UVLO input that disables the channel when grounded, activates the LDOs above 1.3V and the PWM modulator above 1.8V, is internally pulled up when floating, and has a Zener sink limit of 100µA.
13 CS2- input Channel 2 output current-sense signal negative input pin.
14 CS2+ input Channel 2 output current-sense signal positive input pin.
15 PGOOD output Open-drain power-good output that is pulled low when the Channel 1 output is not within ±11% of nominal or EN1 is pulled low.
16 UG2 output High-side MOSFET gate driver output for Channel 2, controlled by the Channel 2 PWM signal.
17 PHASE2 passive Phase node of the Channel 2 boost converter, connected to the upper MOSFET source, filter inductor and lower MOSFET drain.
18 BOOT2 passive Bootstrap pin for the Channel 2 high-side driver, with a bootstrap diode from VDD and a minimum on-time refresh issued when BOOT2 to PHASE2 drops to 5.9V at no switching.
19 LG2/OC_MODE passive Channel 2 low-side gate driver output and OCP mode select pin, where a resistor to ground sets constant-current OCP below 0.3V or hiccup OCP above 0.3V during initialization.
20 VDD power_out Output of the internal 8V linear regulator supplied by VIN or EXTBIAS that powers the low-side drivers and high-side boot circuits, and must be decoupled to PGND with a minimum 4.7µF ceramic capacitor.
21 PGND power_in Power ground connection that is tied to the sources of the lower MOSFETs and the negative terminals of the external input capacitors.
22 LG1/PWM_MODE passive Channel 1 low-side gate driver output and PWM mode select pin, where a resistor to ground selects Forced PWM below 0.3V or Diode Emulation Burst mode above 0.3V during initialization.
23 BOOT1 passive Bootstrap pin for the Channel 1 high-side driver, with a bootstrap diode from VDD and a minimum on-time refresh issued when BOOT1 to PHASE1 drops to 5.9V at no switching.
24 PHASE1 passive Phase node of the Channel 1 boost converter, connected to the upper MOSFET source, filter inductor and lower MOSFET drain.
25 UG1 output High-side MOSFET gate driver output for Channel 1, controlled by the Channel 1 PWM signal.
26 EXTBIAS power_in External bias input for the optional VDD LDO, which disconnects the VIN LDO above 7.4V and must be decoupled with 10µF when used, otherwise tied to ground and never left floating.
27 VIN power_in Input rail that powers the internal VDD LDO and should be decoupled to ground with a 0.1µF to 1µF ceramic capacitor, with an operating range of 4.5V to 80V.
28 CS1+ input Channel 1 output current-sense signal positive input pin.
29 CS1- input Channel 1 output current-sense signal negative input pin.
30 EN/UVLO1 input Channel 1 enable and accurate UVLO input that disables the channel when grounded, activates the LDOs above 1.3V and the PWM modulator above 1.8V, is internally pulled up when floating, and has a Zener sink limit of 100µA.
31 IMON1 passive Channel 1 input current monitor whose pin voltage reaches 1.2V for the average current limit, with a Burst mode entry threshold near 815mV.
32 FB1 input Channel 1 output voltage feedback input regulated to the internal 0.8V reference, which also serves Channel 2 feedback in dual-phase operation.
33 EPAD/SGND passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer RENESAS
Package TQFN-32(5x5)
Category Power Management (PMIC)
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC5V, EN/UVLO1, EN/UVLO2 to GND -0.3 5.9 V 13
VDD to GND -0.3 9 V 13
EXTBIAS to GND -0.3 40 V 13
VIN to GND VIN -0.3 85 V 13
CS1+, CS1-, CS2+, CS2- to GND -0.3 85 V 13
BOOT1, 2 / UG1, 2 to PHASE1, 2 -0.3 12 V 13
PHASE1, 2 to GND -5 85 V min -5 V for <20ns; -0.3 V DC 13
FB1, FB2, SS/TRK1, SS/TRK2, COMP1, COMP2, RT/SYNC, PLL_COMP, CLKOUT/DITHER, BSTEN, CLKEN, OV, PGOOD, IMON1, IMON2 to GND -0.3 V maximum printed as VCC5V + 0.3 V 13
LG1/PWM_MODE, LG2/OC_MODE to GND -0.3 V maximum printed as VDD + 0.3 V 13
CS1+ to CS1- and CS2+ to CS2- -0.3 0.3 V 13
VCC5V, VDD short-circuit to GND duration 1 s short-circuit duration 13
Junction Temperature TJ -55 150 °C 13
Storage Temperature Range -65 150 °C 13
Temperature -40 125 °C 14
VIN to GND VIN 4.5 80 V 14
VCC5V, EN/UVLO1, EN/UVLO2 to GND 0 5.4 V 14
VDD to GND 0 8.4 V 14
EXTBIAS to GND 0 36 V 14
Input Voltage Range VIN 4.5 80 V 14
Internal LDO Output Voltage (VCC5V) VCC5V 4.7 5 5.4 V VIN = 8V, IL = 0mA 14
Maximum Supply Current of Internal LDO (VCC5V) IVCC_MAX 120 mA VVCC5V = 0V, VIN = 8V 14
Internal LDO Output Voltage (VDD) VDD 7.5 8 8.4 V VIN = 12V, EXTBIAS = 0V, IL = 0mA 14
Maximum Supply Current of Internal LDO (VDD) IVDD_MAX 120 mA VVDD = 0V, EXTBIAS = 0V, VIN = 12V 14
EXTBIAS Switch Over Threshold Voltage, Rising VEXT_THR 7.1 7.38 7.55 V EXTBIAS voltage 15
EXTBIAS Switch Over Threshold Voltage, Falling VEXT_THF 6.6 6.85 7.1 V EXTBIAS voltage 15
VCC5V Rising POR Threshold VPORTHR 3.7 4 4.3 V VCC5V voltage, 0mA on VCC5V and VDD 15
VCC5V Falling POR Threshold VPORTHF 3.3 3.55 3.75 V VCC5V voltage, 0mA on VCC5V and VDD 15
EN1 Rise Threshold VEN1SS_THR 0.75 1.05 1.3 V VIN > 5.6V 15
EN1 Fall Threshold VEN1SS_THF 0.6 0.9 1.1 V VIN > 5.6V 15
EN1 Hysteresis VEN1SS_HYST 70 150 300 mV VIN > 5.6V 15
UVLO1 Rise Threshold VUVLO1_THR 1.77 1.8 1.83 V VIN > 5.6V 15
EN2 Rise Threshold VEN2SS_THR 0.75 1.05 1.3 V VIN > 5.6V 15
EN2 Fall Threshold VEN2SS_THF 0.6 0.9 1.1 V VIN > 5.6V 15
EN2 Hysteresis VEN2SS_HYST 70 150 300 mV VIN > 5.6V 15
UVLO2 Rise Threshold VUVLO2_THR 1.77 1.8 1.83 V VIN > 5.6V 15
PGOOD Upper Threshold VPGOV 107 109 112 % 15
PGOOD Lower Threshold VPGUV 87 90 92 % 15
FB_1 Pin Bias Current IFBOUTLKG1 -50 0 50 nA 16
FB_2 Pin Bias Current IFBOUTLKG2 -50 0 50 nA 16
COMP1 Max High Voltage VCOMP1_HIGH 4.7 V FB1 = 0V 16
COMP2 Max High Voltage VCOMP2_HIGH 4.7 V FB2 = 0V 16
Internal Voltage Loop Reference Voltage Accuracy -0.75 0.75 % TA = 0°C to +85°C 16
Internal Voltage Loop Reference Voltage Accuracy -1 1 % TA = -40°C to +125°C 16
PWM1 Minimum Off-Time tOFF_MIN1 220 ns 17
PWM1 Minimum On-Time tON_MIN1 100 ns 17
PWM1 Ramp Offset VROFFSET1 0.85 1.1 1.25 V 17
Current Sense1 Differential Voltage Range VCS1+ - VCS1- -80 150 mV 17
Current Sense1 Common-Mode Voltage Range CMIRCS1 0 80 V 17
Switching Frequency (RT = 144kΩ) fSW 220 245 265 kHz RT = 144kΩ 18
Switching Frequency (RT = 72kΩ) fSW 420 450 485 kHz RT = 72kΩ 18
Switching Frequency (RT open or to VCC5V) fSW 90 120 145 kHz RT open or to VCC5V 18
Switching Frequency (RT = 0V) fSW 470 575 650 kHz RT = 0V 18
SYNC Synchronization Range fSYNC 140 1000 kHz 18
PWM1 Burst Mode Enter Threshold VIMON1BSTEN 0.77 0.815 0.85 V IMON1 pin voltage 18
Driver 1, 2 BOOT Refresh Trip Voltage VBOOTRF1,2 3.8 4.6 5.5 V BOOT voltage - PHASE voltage 18
Thermal Resistance, Junction-to-Ambient (32 Ld TQFN) θJA 29 °C/W free air, high-effective thermal conductivity test board 13
Thermal Resistance, Junction-to-Case (32 Ld TQFN) θJC 1 °C/W case = center of exposed metal pad 13

CAD (KiCad official)

  • Symbol: ISL81805FRTZ-T
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: TQFN-32(5x5) (KiCad packages3D, STEP)
  • 3D model files: isl81805frtz-t-etched.step / isl81805frtz-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); isl81805frtz-t.step / isl81805frtz-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (45 pp, sha256 388d19052b6c5c32, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF