main
Ray Publish 0.1.1 d6b5d80
{
  "slug": "isl81805frtz-t",
  "version": "0.1.1",
  "type": "component",
  "description": "RENESAS DC-DC Converters, TQFN-32(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "isl81805frtz-t",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "isl81805frtz-t.kicad_sym",
    "isl81805frtz-t.kicad_mod",
    "isl81805frtz-t.glb",
    "isl81805frtz-t.step",
    "isl81805frtz-t.lbr",
    "docs/hero.png",
    "docs/isl81805frtz-t-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "isl81805frtz-t-hero.glb",
    "isl81805frtz-t-hero.overlay.json"
  ],
  "component": {
    "mpn": "ISL81805FRTZ-T",
    "manufacturer": "RENESAS",
    "package": "TQFN-32(5x5)",
    "pin_count": 33,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/f11c9403d7339f54e8b28bbedffddefc.pdf",
    "parts": {
      "symbol": "isl81805frtz-t.kicad_sym",
      "footprint": "isl81805frtz-t.kicad_mod",
      "model_3d": "isl81805frtz-t-hero.glb",
      "model_3d_plain": "isl81805frtz-t.glb",
      "model_3d_step": "isl81805frtz-t-etched.step",
      "model_3d_step_plain": "isl81805frtz-t.step",
      "lbr": "isl81805frtz-t.lbr"
    },
    "distributor_links": {
      "lcsc": "C20350796",
      "digikey": "20-ISL81805FRTZ-TTR-ND",
      "mouser": "968-ISL81805FRTZ-T"
    },
    "distributor_check": {
      "checked_at": "2026-11-13T03:14:55Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "20-ISL81805FRTZ-TTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "968-ISL81805FRTZ-T",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "COMP1",
        "type": "output",
        "description": "Channel 1 voltage error GM amplifier output that sets the inner current-loop reference, and the PWM duty cycle reduces to 0% when the pin is pulled below 1V."
      },
      {
        "number": "2",
        "name": "SS/TRK1",
        "type": "passive",
        "description": "Channel 1 soft-start or track pin, where a regulated 2µA source charges the soft-start capacitor to set the output ramp, or an external master rail is applied through a resistor divider for tracking."
      },
      {
        "number": "3",
        "name": "VCC5V",
        "type": "power_out",
        "description": "Output of the internal 5V linear regulator that biases the IC, which must be decoupled to SGND with a minimum 4.7µF ceramic capacitor placed close to the pin."
      },
      {
        "number": "4",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection pin."
      },
      {
        "number": "5",
        "name": "RT/SYNC",
        "type": "input",
        "description": "A resistor to ground sets the default switching frequency from 100kHz to 1MHz, where an open or VCC5V connection gives 120kHz, GND gives 575kHz, and an applied external clock synchronizes the internal oscillator."
      },
      {
        "number": "6",
        "name": "PLL_COMP",
        "type": "passive",
        "description": "Compensation pin for the internal PLL, where RPLL 2.7kΩ, CPLL1 10nF and CPLL2 820pF are recommended."
      },
      {
        "number": "7",
        "name": "CLKOUT/DITHER",
        "type": "bidirectional",
        "description": "Dual-function pin that outputs a clock to synchronize other ISL81805 devices when no capacitor is connected, or enables frequency dither of about ±15% when a capacitor is connected."
      },
      {
        "number": "8",
        "name": "SS/TRK2/OV",
        "type": "bidirectional",
        "description": "Channel 2 soft-start or track pin with a regulated 2µA charge current, which carries the OVP trip signal instead in dual-phase operation."
      },
      {
        "number": "9",
        "name": "COMP2/CLKEN",
        "type": "bidirectional",
        "description": "Channel 2 voltage error GM amplifier output where the PWM duty cycle reduces to 0% when the pin is pulled below 1.1V, and in dual-phase use it carries the PFM OFF (CLKEN) signal."
      },
      {
        "number": "10",
        "name": "FB2/BSTEN",
        "type": "bidirectional",
        "description": "Channel 2 output voltage feedback input regulated to the internal 0.8V reference, which carries the Burst enable (BSTEN) signal in dual-phase operation."
      },
      {
        "number": "11",
        "name": "IMON2",
        "type": "passive",
        "description": "Channel 2 input current monitor whose pin voltage reaches 1.2V for the average current limit, and a voltage above 3V selects single-output dual-phase mode."
      },
      {
        "number": "12",
        "name": "EN/UVLO2",
        "type": "input",
        "description": "Channel 2 enable and accurate UVLO input that disables the channel when grounded, activates the LDOs above 1.3V and the PWM modulator above 1.8V, is internally pulled up when floating, and has a Zener sink limit of 100µA."
      },
      {
        "number": "13",
        "name": "CS2-",
        "type": "input",
        "description": "Channel 2 output current-sense signal negative input pin."
      },
      {
        "number": "14",
        "name": "CS2+",
        "type": "input",
        "description": "Channel 2 output current-sense signal positive input pin."
      },
      {
        "number": "15",
        "name": "PGOOD",
        "type": "output",
        "description": "Open-drain power-good output that is pulled low when the Channel 1 output is not within ±11% of nominal or EN1 is pulled low."
      },
      {
        "number": "16",
        "name": "UG2",
        "type": "output",
        "description": "High-side MOSFET gate driver output for Channel 2, controlled by the Channel 2 PWM signal."
      },
      {
        "number": "17",
        "name": "PHASE2",
        "type": "passive",
        "description": "Phase node of the Channel 2 boost converter, connected to the upper MOSFET source, filter inductor and lower MOSFET drain."
      },
      {
        "number": "18",
        "name": "BOOT2",
        "type": "passive",
        "description": "Bootstrap pin for the Channel 2 high-side driver, with a bootstrap diode from VDD and a minimum on-time refresh issued when BOOT2 to PHASE2 drops to 5.9V at no switching."
      },
      {
        "number": "19",
        "name": "LG2/OC_MODE",
        "type": "passive",
        "description": "Channel 2 low-side gate driver output and OCP mode select pin, where a resistor to ground sets constant-current OCP below 0.3V or hiccup OCP above 0.3V during initialization."
      },
      {
        "number": "20",
        "name": "VDD",
        "type": "power_out",
        "description": "Output of the internal 8V linear regulator supplied by VIN or EXTBIAS that powers the low-side drivers and high-side boot circuits, and must be decoupled to PGND with a minimum 4.7µF ceramic capacitor."
      },
      {
        "number": "21",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground connection that is tied to the sources of the lower MOSFETs and the negative terminals of the external input capacitors."
      },
      {
        "number": "22",
        "name": "LG1/PWM_MODE",
        "type": "passive",
        "description": "Channel 1 low-side gate driver output and PWM mode select pin, where a resistor to ground selects Forced PWM below 0.3V or Diode Emulation Burst mode above 0.3V during initialization."
      },
      {
        "number": "23",
        "name": "BOOT1",
        "type": "passive",
        "description": "Bootstrap pin for the Channel 1 high-side driver, with a bootstrap diode from VDD and a minimum on-time refresh issued when BOOT1 to PHASE1 drops to 5.9V at no switching."
      },
      {
        "number": "24",
        "name": "PHASE1",
        "type": "passive",
        "description": "Phase node of the Channel 1 boost converter, connected to the upper MOSFET source, filter inductor and lower MOSFET drain."
      },
      {
        "number": "25",
        "name": "UG1",
        "type": "output",
        "description": "High-side MOSFET gate driver output for Channel 1, controlled by the Channel 1 PWM signal."
      },
      {
        "number": "26",
        "name": "EXTBIAS",
        "type": "power_in",
        "description": "External bias input for the optional VDD LDO, which disconnects the VIN LDO above 7.4V and must be decoupled with 10µF when used, otherwise tied to ground and never left floating."
      },
      {
        "number": "27",
        "name": "VIN",
        "type": "power_in",
        "description": "Input rail that powers the internal VDD LDO and should be decoupled to ground with a 0.1µF to 1µF ceramic capacitor, with an operating range of 4.5V to 80V."
      },
      {
        "number": "28",
        "name": "CS1+",
        "type": "input",
        "description": "Channel 1 output current-sense signal positive input pin."
      },
      {
        "number": "29",
        "name": "CS1-",
        "type": "input",
        "description": "Channel 1 output current-sense signal negative input pin."
      },
      {
        "number": "30",
        "name": "EN/UVLO1",
        "type": "input",
        "description": "Channel 1 enable and accurate UVLO input that disables the channel when grounded, activates the LDOs above 1.3V and the PWM modulator above 1.8V, is internally pulled up when floating, and has a Zener sink limit of 100µA."
      },
      {
        "number": "31",
        "name": "IMON1",
        "type": "passive",
        "description": "Channel 1 input current monitor whose pin voltage reaches 1.2V for the average current limit, with a Burst mode entry threshold near 815mV."
      },
      {
        "number": "32",
        "name": "FB1",
        "type": "input",
        "description": "Channel 1 output voltage feedback input regulated to the internal 0.8V reference, which also serves Channel 2 feedback in dual-phase operation."
      },
      {
        "number": "33",
        "name": "EPAD/SGND",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The exposed pad is not a numbered pin in the datasheet; it is listed as EPAD/SGND and is included he; The top-view pin-assignment drawing text on page 9 is garbled in the extracted text, so the pin numb; Pin types for analog and switching nodes (compensation, soft-start, phase, boot, current-monitor, an",
          "exposed pad 33 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 45,
        "cost_usd": 0.2537,
        "at": "2026-11-13T03:14:43"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/f11c9403d7339f54e8b28bbedffddefc.pdf",
        "pages": 45,
        "sha256": "388d19052b6c5c32",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 33,
        "described": 33,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "isl81805frtz-t.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.875
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "isl81805frtz-t-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.875
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "9f84f98bfb511a36698cf3eed4b750284a76c1b01590a7f68f788c09bbeed427",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}