main
Ray
Publish 0.1.0
c3e318d
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202
{
"slug": "is25lp256h-jlle",
"version": "0.1.0",
"type": "component",
"description": "ISSI(Integrated Silicon Solution) NOR FLASH, WSON-8-EP(6x8). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"memory",
"is25lp256h-jlle",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"is25lp256h-jlle.kicad_sym",
"is25lp256h-jlle.kicad_mod",
"is25lp256h-jlle.glb",
"is25lp256h-jlle.step",
"is25lp256h-jlle.lbr",
"docs/hero.png",
"docs/is25lp256h-jlle-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"is25lp256h-jlle-hero.glb",
"is25lp256h-jlle-hero.overlay.json",
"is25lp256h-jlle-etched.glb"
],
"component": {
"mpn": "IS25LP256H-JLLE",
"manufacturer": "ISSI(Integrated Silicon Solution)",
"package": "WSON-8-EP(6x8)",
"pin_count": 9,
"category": "Memory",
"subcategory": "NOR FLASH",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/3c272a1f456989789bb519c628acf289.pdf",
"parts": {
"symbol": "is25lp256h-jlle.kicad_sym",
"footprint": "is25lp256h-jlle.kicad_mod",
"model_3d": "is25lp256h-jlle-hero.glb",
"model_3d_plain": "is25lp256h-jlle-etched.glb",
"model_3d_step": "is25lp256h-jlle-etched.step",
"model_3d_step_plain": "is25lp256h-jlle.step",
"lbr": "is25lp256h-jlle.lbr"
},
"distributor_links": {
"lcsc": "C6062485",
"digikey": "706-IS25LP256H-JLLE-ND",
"mouser": "870-IS25LP256H-JLLE"
},
"distributor_check": {
"checked_at": "2026-11-04T23:32:50Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "706-IS25LP256H-JLLE-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "870-IS25LP256H-JLLE",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "CE#",
"type": "input",
"description": "Chip Enable (CE#) selects the device when pulled low, and the device deselects and enters low-power standby with outputs in high impedance when CE# is high."
},
{
"number": "2",
"name": "SO (IO1)",
"type": "bidirectional",
"description": "Serial Output (SO/IO1) reads data on the falling edge of SCK in standard SPI and becomes a bidirectional IO1 in Dual and Quad SPI modes."
},
{
"number": "3",
"name": "WP# (IO2)",
"type": "bidirectional",
"description": "Write Protect (WP#/IO2) protects the Status Register together with the SRWD bit when pulled low and is unavailable as WP# once QE is set to 1 because it serves as IO2."
},
{
"number": "4",
"name": "GND",
"type": "power_in",
"description": "Ground: connect to ground when referenced to Vcc."
},
{
"number": "5",
"name": "SI (IO0)",
"type": "bidirectional",
"description": "Serial Data Input (SI/IO0) writes instructions, addresses or data on the rising edge of SCK in standard SPI and becomes bidirectional IO0 in Dual and Quad SPI modes."
},
{
"number": "6",
"name": "SCK",
"type": "input",
"description": "Serial Clock (SCK) is the synchronized clock for input and output timing operations."
},
{
"number": "7",
"name": "HOLD# or RESET# (IO3)",
"type": "bidirectional",
"description": "HOLD# or RESET#/IO3 pauses serial communication when driven low with CE# low, or acts as RESET# when P7=1 and QE=0, and becomes IO3 when QE is set to 1."
},
{
"number": "8",
"name": "VCC",
"type": "power_in",
"description": "Power: device core power supply, specified at 2.70V to 3.60V for the IS25LP series."
},
{
"number": "9",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The package hint says WSON-8-EP(6x8), but the datasheet lists the 8-contact WSON as 8x6mm (packages ; The exposed pad of the WSON package is not listed as a numbered pin in the provided text, so no EP p; The page 8 WSON pin diagram text is garbled, so pin numbers 1-8 were taken from the legible WSON pin",
"exposed pad 9 added from the footprint"
],
"pages_sent": 9,
"cost_usd": 0.1087,
"at": "2026-11-04T23:32:27"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/3c272a1f456989789bb519c628acf289.pdf",
"pages": 195,
"sha256": "b00e1374d8f6b56c",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 9,
"described": 9,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "is25lp256h-jlle.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
8.02,
6.0,
0.75
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "aba4cd51b0a4154b75183345cf73a3d6b64d3fcc23003c62c656b3109c55ae16",
"checked": "2026-11-04",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "is25lp256h-jlle-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
8.02,
6.0,
0.75
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "59e26bf8a0741fd998e44c319430df32cad1bf39c247ec9ced274e6250e43561",
"checked": "2026-11-04",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}