Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

IS25LP256H-JLLE

ISSI(Integrated Silicon Solution) · NOR FLASH · WSON-8-EP(6x8)

IS25LP256H-JLLE from ISSI(Integrated Silicon Solution), in a WSON-8-EP(6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CE# input Chip Enable (CE#) selects the device when pulled low, and the device deselects and enters low-power standby with outputs in high impedance when CE# is high.
2 SO (IO1) bidirectional Serial Output (SO/IO1) reads data on the falling edge of SCK in standard SPI and becomes a bidirectional IO1 in Dual and Quad SPI modes.
3 WP# (IO2) bidirectional Write Protect (WP#/IO2) protects the Status Register together with the SRWD bit when pulled low and is unavailable as WP# once QE is set to 1 because it serves as IO2.
4 GND power_in Ground: connect to ground when referenced to Vcc.
5 SI (IO0) bidirectional Serial Data Input (SI/IO0) writes instructions, addresses or data on the rising edge of SCK in standard SPI and becomes bidirectional IO0 in Dual and Quad SPI modes.
6 SCK input Serial Clock (SCK) is the synchronized clock for input and output timing operations.
7 HOLD# or RESET# (IO3) bidirectional HOLD# or RESET#/IO3 pauses serial communication when driven low with CE# low, or acts as RESET# when P7=1 and QE=0, and becomes IO3 when QE is set to 1.
8 VCC power_in Power: device core power supply, specified at 2.70V to 3.60V for the IS25LP series.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer ISSI(Integrated Silicon Solution)
Package WSON-8-EP(6x8)
Category Memory
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Temperature (Extended grade E) -40 105 °C Extended grade E 180
VCC Power Supply VCC 2.7 3 3.6 V 180
Storage Temperature -65 150 °C 180
Surface Mount Lead Soldering Temperature 260 °C Lead-free package, 3 seconds 180
Input Voltage with Respect to Ground on All Pins -0.5 V Upper limit printed as VCC + 0.5V 180
All Output Voltage with Respect to Ground -0.5 V Upper limit printed as VCC + 0.5V 180
VCC Active Read current ICC1 8 10 mA NORD at 80MHz 181
VCC Active Read current ICC1 10 12 mA FRD Single at 166MHz 181
VCC Active Read current ICC1 12 14 mA FRD Dual at 166MHz 181
VCC Active Read current ICC1 15 18 mA FRD Quad at 166MHz 181
VCC Active Read current ICC1 9 11 mA FRD Single at 133MHz 181
VCC Active Read current ICC1 10 13 mA FRD Dual at 133MHz 181
VCC Active Read current ICC1 13 16 mA FRD Quad at 133MHz 181
VCC Active Read current ICC1 9 12 mA FRD Single DTR at 80MHz 181
VCC Active Read current ICC1 10 14 mA FRD Dual DTR at 80MHz 181
VCC Program Current ICC2 25 30 mA CE# = VCC, 85°C 181
VCC Program Current ICC2 30 mA CE# = VCC, 105°C 181
VCC WRSR Current ICC3 25 30 mA CE# = VCC, 85°C 181
VCC WRSR Current ICC3 30 mA CE# = VCC, 105°C 181
VCC Erase Current (SER/4SER/BER32/4BER32/BER64/4BER64) ICC4 25 30 mA CE# = VCC, 85°C 181
VCC Erase Current (SER/4SER/BER32/4BER32/BER64/4BER64) ICC4 30 mA CE# = VCC, 105°C 181
VCC Erase Current (CE) ICC5 25 30 mA CE# = VCC, 85°C 181
VCC Erase Current (CE) ICC5 30 mA CE# = VCC, 105°C 181
VCC Standby Current CMOS ISB1 10 60 µA CE# = VCC, VIN = GND or VCC, 85°C 181
VCC Standby Current CMOS ISB1 90 µA CE# = VCC, VIN = GND or VCC, 105°C 181
Deep power down current ISB2 7.5 20 µA CE# = VCC, VIN = GND or VCC, 85°C 181
Deep power down current ISB2 30 µA CE# = VCC, VIN = GND or VCC, 105°C 181
Input Leakage Current ILI -1 1 µA VIN = 0V to VCC 181
Output Leakage Current ILO -1 1 µA VIN = 0V to VCC 181
Input Low Voltage VIL -0.5 V Upper limit printed as 0.3VCC 181
Output Low Voltage VOL 0.2 V IOL = 100 µA 181
Clock Frequency except for fast read DTR and read (03h) fCT 0 166 MHz 183
Clock Frequency for fast read DTR (SPI DTR, Dual DTR, Dual I/O DTR and Quad I/O DTR) 0 80 MHz 183
Clock Frequency for fast read QPI DTR 0 66 MHz 183
Clock Frequency for read (03h) fC 0 80 MHz read (03h) 183
CE# High Time tCEH 7 ns 183
CE# Setup Time tCS 3 ns 183
CE# Hold Time tCH 3 ns 183
CE# Not Active Hold Time tCHSL 3 ns 183
CE# Not Active Setup Time tSHCH 3 ns 183
Data In Setup Time tDS 2 ns STR 183
Data In Setup Time tDS 1.5 ns DTR 183
Data in Hold Time tDH 2 ns STR 183
Data in Hold Time tDH 1.5 ns DTR 183
Output Valid tV 6 ns -40°C to 85°C, @10pF 183
Output Valid tV 7.5 ns -40°C to 85°C, @30pF 183
Output Hold Time tOH 2 ns 183
Output Disable Time tDIS 8 ns 183
Sector Erase Time (4Kbyte) tEC 100 300 ms 184
Block Erase Time (32Kbyte) tEC 0.14 0.5 s 184
Block Erase time (64Kbyte) tEC 0.17 1 s 184
Block Erase time (256Kbyte) tEC 0.68 4 s 184
Chip Erase Time tEC 70 180 s 184
Page Program Time 256byte tPP 0.3 1 ms 256byte 184
Page Program Time 512byte tPP 0.6 2 ms 512byte 184
Write Status Register time tW 2 15 ms 184
RESET# pin low pulse width tRESET 100 ns 184

CAD (KiCad official)

  • Symbol: IS25LP256H-JLLE
  • Footprint: Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm
  • 3D model: WSON-8-EP(6x8), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: is25lp256h-jlle-etched.step / is25lp256h-jlle-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); is25lp256h-jlle.step / is25lp256h-jlle.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ISSI(Integrated Silicon Solution) datasheet (195 pp, sha256 b00e1374d8f6b56c, retrieved 2026-11-04, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF