Generated by kicad-footprint-generator · KiCad file format 20260206
IS25LP256H-JLLE
ISSI(Integrated Silicon Solution) · NOR FLASH · WSON-8-EP(6x8)
IS25LP256H-JLLE from ISSI(Integrated Silicon Solution), in a WSON-8-EP(6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CE# | input | Chip Enable (CE#) selects the device when pulled low, and the device deselects and enters low-power standby with outputs in high impedance when CE# is high. |
| 2 | SO (IO1) | bidirectional | Serial Output (SO/IO1) reads data on the falling edge of SCK in standard SPI and becomes a bidirectional IO1 in Dual and Quad SPI modes. |
| 3 | WP# (IO2) | bidirectional | Write Protect (WP#/IO2) protects the Status Register together with the SRWD bit when pulled low and is unavailable as WP# once QE is set to 1 because it serves as IO2. |
| 4 | GND | power_in | Ground: connect to ground when referenced to Vcc. |
| 5 | SI (IO0) | bidirectional | Serial Data Input (SI/IO0) writes instructions, addresses or data on the rising edge of SCK in standard SPI and becomes bidirectional IO0 in Dual and Quad SPI modes. |
| 6 | SCK | input | Serial Clock (SCK) is the synchronized clock for input and output timing operations. |
| 7 | HOLD# or RESET# (IO3) | bidirectional | HOLD# or RESET#/IO3 pauses serial communication when driven low with CE# low, or acts as RESET# when P7=1 and QE=0, and becomes IO3 when QE is set to 1. |
| 8 | VCC | power_in | Power: device core power supply, specified at 2.70V to 3.60V for the IS25LP series. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ISSI(Integrated Silicon Solution) |
| Package | WSON-8-EP(6x8) |
| Category | Memory |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Temperature (Extended grade E) | -40 | 105 | °C | Extended grade E | 180 | ||
| VCC Power Supply | VCC | 2.7 | 3 | 3.6 | V | 180 | |
| Storage Temperature | -65 | 150 | °C | 180 | |||
| Surface Mount Lead Soldering Temperature | 260 | °C | Lead-free package, 3 seconds | 180 | |||
| Input Voltage with Respect to Ground on All Pins | -0.5 | V | Upper limit printed as VCC + 0.5V | 180 | |||
| All Output Voltage with Respect to Ground | -0.5 | V | Upper limit printed as VCC + 0.5V | 180 | |||
| VCC Active Read current | ICC1 | 8 | 10 | mA | NORD at 80MHz | 181 | |
| VCC Active Read current | ICC1 | 10 | 12 | mA | FRD Single at 166MHz | 181 | |
| VCC Active Read current | ICC1 | 12 | 14 | mA | FRD Dual at 166MHz | 181 | |
| VCC Active Read current | ICC1 | 15 | 18 | mA | FRD Quad at 166MHz | 181 | |
| VCC Active Read current | ICC1 | 9 | 11 | mA | FRD Single at 133MHz | 181 | |
| VCC Active Read current | ICC1 | 10 | 13 | mA | FRD Dual at 133MHz | 181 | |
| VCC Active Read current | ICC1 | 13 | 16 | mA | FRD Quad at 133MHz | 181 | |
| VCC Active Read current | ICC1 | 9 | 12 | mA | FRD Single DTR at 80MHz | 181 | |
| VCC Active Read current | ICC1 | 10 | 14 | mA | FRD Dual DTR at 80MHz | 181 | |
| VCC Program Current | ICC2 | 25 | 30 | mA | CE# = VCC, 85°C | 181 | |
| VCC Program Current | ICC2 | 30 | mA | CE# = VCC, 105°C | 181 | ||
| VCC WRSR Current | ICC3 | 25 | 30 | mA | CE# = VCC, 85°C | 181 | |
| VCC WRSR Current | ICC3 | 30 | mA | CE# = VCC, 105°C | 181 | ||
| VCC Erase Current (SER/4SER/BER32/4BER32/BER64/4BER64) | ICC4 | 25 | 30 | mA | CE# = VCC, 85°C | 181 | |
| VCC Erase Current (SER/4SER/BER32/4BER32/BER64/4BER64) | ICC4 | 30 | mA | CE# = VCC, 105°C | 181 | ||
| VCC Erase Current (CE) | ICC5 | 25 | 30 | mA | CE# = VCC, 85°C | 181 | |
| VCC Erase Current (CE) | ICC5 | 30 | mA | CE# = VCC, 105°C | 181 | ||
| VCC Standby Current CMOS | ISB1 | 10 | 60 | µA | CE# = VCC, VIN = GND or VCC, 85°C | 181 | |
| VCC Standby Current CMOS | ISB1 | 90 | µA | CE# = VCC, VIN = GND or VCC, 105°C | 181 | ||
| Deep power down current | ISB2 | 7.5 | 20 | µA | CE# = VCC, VIN = GND or VCC, 85°C | 181 | |
| Deep power down current | ISB2 | 30 | µA | CE# = VCC, VIN = GND or VCC, 105°C | 181 | ||
| Input Leakage Current | ILI | -1 | 1 | µA | VIN = 0V to VCC | 181 | |
| Output Leakage Current | ILO | -1 | 1 | µA | VIN = 0V to VCC | 181 | |
| Input Low Voltage | VIL | -0.5 | V | Upper limit printed as 0.3VCC | 181 | ||
| Output Low Voltage | VOL | 0.2 | V | IOL = 100 µA | 181 | ||
| Clock Frequency except for fast read DTR and read (03h) | fCT | 0 | 166 | MHz | 183 | ||
| Clock Frequency for fast read DTR (SPI DTR, Dual DTR, Dual I/O DTR and Quad I/O DTR) | 0 | 80 | MHz | 183 | |||
| Clock Frequency for fast read QPI DTR | 0 | 66 | MHz | 183 | |||
| Clock Frequency for read (03h) | fC | 0 | 80 | MHz | read (03h) | 183 | |
| CE# High Time | tCEH | 7 | ns | 183 | |||
| CE# Setup Time | tCS | 3 | ns | 183 | |||
| CE# Hold Time | tCH | 3 | ns | 183 | |||
| CE# Not Active Hold Time | tCHSL | 3 | ns | 183 | |||
| CE# Not Active Setup Time | tSHCH | 3 | ns | 183 | |||
| Data In Setup Time | tDS | 2 | ns | STR | 183 | ||
| Data In Setup Time | tDS | 1.5 | ns | DTR | 183 | ||
| Data in Hold Time | tDH | 2 | ns | STR | 183 | ||
| Data in Hold Time | tDH | 1.5 | ns | DTR | 183 | ||
| Output Valid | tV | 6 | ns | -40°C to 85°C, @10pF | 183 | ||
| Output Valid | tV | 7.5 | ns | -40°C to 85°C, @30pF | 183 | ||
| Output Hold Time | tOH | 2 | ns | 183 | |||
| Output Disable Time | tDIS | 8 | ns | 183 | |||
| Sector Erase Time (4Kbyte) | tEC | 100 | 300 | ms | 184 | ||
| Block Erase Time (32Kbyte) | tEC | 0.14 | 0.5 | s | 184 | ||
| Block Erase time (64Kbyte) | tEC | 0.17 | 1 | s | 184 | ||
| Block Erase time (256Kbyte) | tEC | 0.68 | 4 | s | 184 | ||
| Chip Erase Time | tEC | 70 | 180 | s | 184 | ||
| Page Program Time 256byte | tPP | 0.3 | 1 | ms | 256byte | 184 | |
| Page Program Time 512byte | tPP | 0.6 | 2 | ms | 512byte | 184 | |
| Write Status Register time | tW | 2 | 15 | ms | 184 | ||
| RESET# pin low pulse width | tRESET | 100 | ns | 184 |
CAD (KiCad official)
- Symbol:
IS25LP256H-JLLE - Footprint:
Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm - 3D model: WSON-8-EP(6x8), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
is25lp256h-jlle-etched.step/is25lp256h-jlle-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);is25lp256h-jlle.step/is25lp256h-jlle.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ISSI(Integrated Silicon Solution) datasheet (195 pp, sha256
b00e1374d8f6b56c, retrieved 2026-11-04, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).