main
History Download
Ray Initial commit: component/ips4260l 19468b0

IPS4260L

STMicroelectronics · Power Distribution Switches · HTSSOP-20-EP

IPS4260L from STMicroelectronics, in a HTSSOP-20-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PGND power_in Integrated power switch ground, internally connected to source of integrated switches; part of multi-pin ground connection.
2 PGND power_in Integrated power switch ground, internally connected to source of integrated switches; part of multi-pin ground connection.
3 VZ output Load clamp voltage pin, must be shorted to pin 18 and connected directly to supply rail or via external Zener/TVS diode; clamps inductive load turn-off transients; voltage range -0.3 V to 55 V.
4 IN1 bidirectional Channel 1 input/control with internal weak pull-down resistor; internally wired to open drain diagnostic transistor for cut-off and thermal shutdown signaling; input voltage range 0 V to 5.5 V.
5 IN2 bidirectional Channel 2 input/control with internal weak pull-down resistor; internally wired to open drain diagnostic transistor for cut-off and thermal shutdown signaling; input voltage range 0 V to 5.5 V.
6 IN3 bidirectional Channel 3 input/control with internal weak pull-down resistor; internally wired to open drain diagnostic transistor for cut-off and thermal shutdown signaling; input voltage range 0 V to 5.5 V.
7 IN4 bidirectional Channel 4 input/control with internal weak pull-down resistor; internally wired to open drain diagnostic transistor for cut-off and thermal shutdown signaling; input voltage range 0 V to 5.5 V.
8 SGND power_in Logic interface block ground, provides reference level for logic interface and must be shorted to PGND on application board to minimize switching noise.
9 OL tri_state Cumulative open load diagnostic output, open drain pin activated when any load is disconnected in off-state; output voltage 0.1 V at 5 mA; current range -10 mA to +10 mA.
10 FLT tri_state Common cut-off and thermal shutdown fault diagnostic output, open drain pin; activated during thermal shutdown or current limitation cut-off event on any channel; output voltage 0.1 V at 5 mA.
11 CoD input Cut-off delay programming input, cannot be left floating; connect to SGND to disable cut-off function or connect external resistor (60-240 kΩ range) to set cut-off delay; voltage range 0 V to 5.5 V.
12 ILIM input Current limitation threshold programming input, cannot be left floating; connect external resistor (30-120 kΩ) between pin and SGND to set current limit threshold; voltage range 0 V to 5.5 V.
13 VCC power_in Supply voltage input with operating range 8 V to 50 V; absolute maximum rating 55 V; must be connected directly to supply rail; includes internal undervoltage lock-out.
14 LOAD4 output Channel 4 power stage output, low-side switch output; load connected between this pin and VCC rail; output voltage range -0.3 V to VDEMAG (55-60 V); current limited by ILIM setting.
15 LOAD3 output Channel 3 power stage output, low-side switch output; load connected between this pin and VCC rail; output voltage range -0.3 V to VDEMAG (55-60 V); current limited by ILIM setting.
16 LOAD2 output Channel 2 power stage output, low-side switch output; load connected between this pin and VCC rail; output voltage range -0.3 V to VDEMAG (55-60 V); current limited by ILIM setting.
17 LOAD1 output Channel 1 power stage output, low-side switch output; load connected between this pin and VCC rail; output voltage range -0.3 V to VDEMAG (55-60 V); current limited by ILIM setting.
18 VZ output Load clamp voltage pin, must be shorted to pin 3 and connected directly to supply rail or via external Zener/TVS diode; clamps inductive load turn-off transients; voltage range -0.3 V to 55 V.
19 PGND power_in Integrated power switch ground, internally connected to source of integrated switches; part of multi-pin ground connection.
20 PGND power_in Integrated power switch ground, internally connected to source of integrated switches; part of multi-pin ground connection.
21 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package HTSSOP-20-EP
Category Power Management (PMIC)
Pins 21

CAD (KiCad official)

  • Symbol: IPS4260L
  • Footprint: Package_SO:TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm
  • 3D model: HTSSOP-20-EP, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.2 mm nominal TSSOP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: ips4260l-etched.step / ips4260l-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ips4260l.step / ips4260l.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (28 pp, sha256 5455c0377292d727, retrieved 2026-10-01, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF