← Commit history

Initial commit: component/ips4260l

Ray ·19468b0733 ·
2 files changed +292
README.mdadded+57
@@ -0,0 +1,57 @@+# IPS4260L++**STMicroelectronics** · Power Distribution Switches · HTSSOP-20-EP++IPS4260L from STMicroelectronics, in a HTSSOP-20-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PGND | power_in | Integrated power switch ground, internally connected to source of integrated switches; part of multi-pin ground connection. |+| 2 | PGND | power_in | Integrated power switch ground, internally connected to source of integrated switches; part of multi-pin ground connection. |+| 3 | VZ | output | Load clamp voltage pin, must be shorted to pin 18 and connected directly to supply rail or via external Zener/TVS diode; clamps inductive load turn-off transients; voltage range -0.3 V to 55 V. |+| 4 | IN1 | bidirectional | Channel 1 input/control with internal weak pull-down resistor; internally wired to open drain diagnostic transistor for cut-off and thermal shutdown signaling; input voltage range 0 V to 5.5 V. |+| 5 | IN2 | bidirectional | Channel 2 input/control with internal weak pull-down resistor; internally wired to open drain diagnostic transistor for cut-off and thermal shutdown signaling; input voltage range 0 V to 5.5 V. |+| 6 | IN3 | bidirectional | Channel 3 input/control with internal weak pull-down resistor; internally wired to open drain diagnostic transistor for cut-off and thermal shutdown signaling; input voltage range 0 V to 5.5 V. |+| 7 | IN4 | bidirectional | Channel 4 input/control with internal weak pull-down resistor; internally wired to open drain diagnostic transistor for cut-off and thermal shutdown signaling; input voltage range 0 V to 5.5 V. |+| 8 | SGND | power_in | Logic interface block ground, provides reference level for logic interface and must be shorted to PGND on application board to minimize switching noise. |+| 9 | OL | tri_state | Cumulative open load diagnostic output, open drain pin activated when any load is disconnected in off-state; output voltage 0.1 V at 5 mA; current range -10 mA to +10 mA. |+| 10 | FLT | tri_state | Common cut-off and thermal shutdown fault diagnostic output, open drain pin; activated during thermal shutdown or current limitation cut-off event on any channel; output voltage 0.1 V at 5 mA. |+| 11 | CoD | input | Cut-off delay programming input, cannot be left floating; connect to SGND to disable cut-off function or connect external resistor (60-240 kΩ range) to set cut-off delay; voltage range 0 V to 5.5 V. |+| 12 | ILIM | input | Current limitation threshold programming input, cannot be left floating; connect external resistor (30-120 kΩ) between pin and SGND to set current limit threshold; voltage range 0 V to 5.5 V. |+| 13 | VCC | power_in | Supply voltage input with operating range 8 V to 50 V; absolute maximum rating 55 V; must be connected directly to supply rail; includes internal undervoltage lock-out. |+| 14 | LOAD4 | output | Channel 4 power stage output, low-side switch output; load connected between this pin and VCC rail; output voltage range -0.3 V to VDEMAG (55-60 V); current limited by ILIM setting. |+| 15 | LOAD3 | output | Channel 3 power stage output, low-side switch output; load connected between this pin and VCC rail; output voltage range -0.3 V to VDEMAG (55-60 V); current limited by ILIM setting. |+| 16 | LOAD2 | output | Channel 2 power stage output, low-side switch output; load connected between this pin and VCC rail; output voltage range -0.3 V to VDEMAG (55-60 V); current limited by ILIM setting. |+| 17 | LOAD1 | output | Channel 1 power stage output, low-side switch output; load connected between this pin and VCC rail; output voltage range -0.3 V to VDEMAG (55-60 V); current limited by ILIM setting. |+| 18 | VZ | output | Load clamp voltage pin, must be shorted to pin 3 and connected directly to supply rail or via external Zener/TVS diode; clamps inductive load turn-off transients; voltage range -0.3 V to 55 V. |+| 19 | PGND | power_in | Integrated power switch ground, internally connected to source of integrated switches; part of multi-pin ground connection. |+| 20 | PGND | power_in | Integrated power switch ground, internally connected to source of integrated switches; part of multi-pin ground connection. |+| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | HTSSOP-20-EP |+| Category | Power Management (PMIC) |+| Pins | 21 |++## CAD (KiCad official)++- Symbol: `IPS4260L`+- Footprint: `Package_SO:TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm`+- 3D model: HTSSOP-20-EP, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.2 mm nominal TSSOP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)+- 3D model files: `ips4260l-etched.step` / `ips4260l-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ips4260l.step` / `ips4260l.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588876818559979520) (28 pp, sha256 `5455c0377292d727`, retrieved 2026-10-01, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ips4260l-datasheet.pdf)
page.jsonadded+235
@@ -0,0 +1,235 @@+{+  "slug": "ips4260l",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Power Distribution Switches, HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "ips4260l",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ips4260l.kicad_sym",+    "ips4260l.kicad_mod",+    "ips4260l.glb",+    "ips4260l.step",+    "ips4260l.lbr",+    "docs/hero.png",+    "docs/ips4260l-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "IPS4260L",+    "manufacturer": "STMicroelectronics",+    "package": "HTSSOP-20-EP",+    "pin_count": 21,+    "category": "Power Management (PMIC)",+    "subcategory": "Power Distribution Switches",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588876818559979520",+    "parts": {+      "symbol": "ips4260l.kicad_sym",+      "footprint": "ips4260l.kicad_mod",+      "model_3d": "ips4260l-etched.glb",+      "model_3d_plain": "ips4260l.glb",+      "model_3d_step": "ips4260l-etched.step",+      "model_3d_step_plain": "ips4260l.step",+      "lbr": "ips4260l.lbr"+    },+    "distributor_links": {+      "lcsc": "C1556603",+      "mouser": "511-IPS4260L"+    },+    "distributor_check": {+      "checked_at": "2026-10-01T17:44:47Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": null,+        "status": "no match"+      },+      "mouser": {+        "pn": "511-IPS4260L",+        "status": "found",+        "lifecycle": "Obsolete"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "PGND",+        "type": "power_in",+        "description": "Integrated power switch ground, internally connected to source of integrated switches; part of multi-pin ground connection."+      },+      {+        "number": "2",+        "name": "PGND",+        "type": "power_in",+        "description": "Integrated power switch ground, internally connected to source of integrated switches; part of multi-pin ground connection."+      },+      {+        "number": "3",+        "name": "VZ",+        "type": "output",+        "description": "Load clamp voltage pin, must be shorted to pin 18 and connected directly to supply rail or via external Zener/TVS diode; clamps inductive load turn-off transients; voltage range -0.3 V to 55 V."+      },+      {+        "number": "4",+        "name": "IN1",+        "type": "bidirectional",+        "description": "Channel 1 input/control with internal weak pull-down resistor; internally wired to open drain diagnostic transistor for cut-off and thermal shutdown signaling; input voltage range 0 V to 5.5 V."+      },+      {+        "number": "5",+        "name": "IN2",+        "type": "bidirectional",+        "description": "Channel 2 input/control with internal weak pull-down resistor; internally wired to open drain diagnostic transistor for cut-off and thermal shutdown signaling; input voltage range 0 V to 5.5 V."+      },+      {+        "number": "6",+        "name": "IN3",+        "type": "bidirectional",+        "description": "Channel 3 input/control with internal weak pull-down resistor; internally wired to open drain diagnostic transistor for cut-off and thermal shutdown signaling; input voltage range 0 V to 5.5 V."+      },+      {+        "number": "7",+        "name": "IN4",+        "type": "bidirectional",+        "description": "Channel 4 input/control with internal weak pull-down resistor; internally wired to open drain diagnostic transistor for cut-off and thermal shutdown signaling; input voltage range 0 V to 5.5 V."+      },+      {+        "number": "8",+        "name": "SGND",+        "type": "power_in",+        "description": "Logic interface block ground, provides reference level for logic interface and must be shorted to PGND on application board to minimize switching noise."+      },+      {+        "number": "9",+        "name": "OL",+        "type": "tri_state",+        "description": "Cumulative open load diagnostic output, open drain pin activated when any load is disconnected in off-state; output voltage 0.1 V at 5 mA; current range -10 mA to +10 mA."+      },+      {+        "number": "10",+        "name": "FLT",+        "type": "tri_state",+        "description": "Common cut-off and thermal shutdown fault diagnostic output, open drain pin; activated during thermal shutdown or current limitation cut-off event on any channel; output voltage 0.1 V at 5 mA."+      },+      {+        "number": "11",+        "name": "CoD",+        "type": "input",+        "description": "Cut-off delay programming input, cannot be left floating; connect to SGND to disable cut-off function or connect external resistor (60-240 kΩ range) to set cut-off delay; voltage range 0 V to 5.5 V."+      },+      {+        "number": "12",+        "name": "ILIM",+        "type": "input",+        "description": "Current limitation threshold programming input, cannot be left floating; connect external resistor (30-120 kΩ) between pin and SGND to set current limit threshold; voltage range 0 V to 5.5 V."+      },+      {+        "number": "13",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage input with operating range 8 V to 50 V; absolute maximum rating 55 V; must be connected directly to supply rail; includes internal undervoltage lock-out."+      },+      {+        "number": "14",+        "name": "LOAD4",+        "type": "output",+        "description": "Channel 4 power stage output, low-side switch output; load connected between this pin and VCC rail; output voltage range -0.3 V to VDEMAG (55-60 V); current limited by ILIM setting."+      },+      {+        "number": "15",+        "name": "LOAD3",+        "type": "output",+        "description": "Channel 3 power stage output, low-side switch output; load connected between this pin and VCC rail; output voltage range -0.3 V to VDEMAG (55-60 V); current limited by ILIM setting."+      },+      {+        "number": "16",+        "name": "LOAD2",+        "type": "output",+        "description": "Channel 2 power stage output, low-side switch output; load connected between this pin and VCC rail; output voltage range -0.3 V to VDEMAG (55-60 V); current limited by ILIM setting."+      },+      {+        "number": "17",+        "name": "LOAD1",+        "type": "output",+        "description": "Channel 1 power stage output, low-side switch output; load connected between this pin and VCC rail; output voltage range -0.3 V to VDEMAG (55-60 V); current limited by ILIM setting."+      },+      {+        "number": "18",+        "name": "VZ",+        "type": "output",+        "description": "Load clamp voltage pin, must be shorted to pin 3 and connected directly to supply rail or via external Zener/TVS diode; clamps inductive load turn-off transients; voltage range -0.3 V to 55 V."+      },+      {+        "number": "19",+        "name": "PGND",+        "type": "power_in",+        "description": "Integrated power switch ground, internally connected to source of integrated switches; part of multi-pin ground connection."+      },+      {+        "number": "20",+        "name": "PGND",+        "type": "power_in",+        "description": "Integrated power switch ground, internally connected to source of integrated switches; part of multi-pin ground connection."+      },+      {+        "number": "21",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Exposed pad (EP) designation: The datasheet lists the exposed thermal pad as part of pin 8 (SGND) bu; Multiple pins share same signal names (PGND at pins 1,2,19,20; VZ at pins 3,18; SGND at pin 8 and ex"+        ],+        "pages_sent": 28,+        "cost_usd": 0.1553,+        "at": "2026-10-01T17:44:23"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588876818559979520",+        "pages": 28,+        "sha256": "5455c0377292d727",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 21,+        "described": 21,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file