main
Ray ina201aidgkr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) e8ad51e
{
  "slug": "ina201aidgkr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Current Sense Amplifiers, VSSOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "amplifiers-comparators",
    "ina201aidgkr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ina201aidgkr.kicad_sym",
    "ina201aidgkr.kicad_mod",
    "ina201aidgkr.glb",
    "ina201aidgkr.step",
    "ina201aidgkr.lbr",
    "docs/hero.png",
    "docs/ina201aidgkr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "INA201AIDGKR",
    "manufacturer": "Texas Instruments",
    "package": "VSSOP-8",
    "pin_count": 8,
    "category": "Amplifiers/Comparators",
    "subcategory": "Current Sense Amplifiers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/ina200",
    "parts": {
      "symbol": "ina201aidgkr.kicad_sym",
      "footprint": "ina201aidgkr.kicad_mod",
      "model_3d": "ina201aidgkr-etched.glb",
      "model_3d_plain": "ina201aidgkr.glb",
      "model_3d_step": "ina201aidgkr-etched.step",
      "model_3d_step_plain": "ina201aidgkr.step",
      "lbr": "ina201aidgkr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2870970"
    },
    "pins": [
      {
        "number": "1",
        "name": "VS",
        "type": "power_in",
        "description": "Supply voltage input, operating range 2.7 V to 18 V with maximum quiescent current 1800 μA."
      },
      {
        "number": "2",
        "name": "OUT",
        "type": "output",
        "description": "Analog output voltage with 50 V/V gain, output swing from (GND + 0.004 V) to (VS - 0.15 V)."
      },
      {
        "number": "3",
        "name": "CMPIN",
        "type": "input",
        "description": "Comparator input terminal, voltage range 0 V to (VS - 1.5 V) with 10 nA maximum input bias current."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Analog ground reference."
      },
      {
        "number": "5",
        "name": "RESET",
        "type": "input",
        "description": "Comparator reset pin (active low), internal 2 MΩ pull-down with 1.5 μs minimum pulse width."
      },
      {
        "number": "6",
        "name": "CMPOUT",
        "type": "tri_state",
        "description": "Open-drain comparator output, 1.3 μs typical response time, VOL 220-300 mV at IOL = 2.35 mA."
      },
      {
        "number": "7",
        "name": "VIN–",
        "type": "power_in",
        "description": "Shunt negative input terminal, common-mode range -16 V to 80 V, differential voltage ±18 V."
      },
      {
        "number": "8",
        "name": "VIN+",
        "type": "power_in",
        "description": "Shunt positive input terminal, common-mode range -16 V to 80 V, differential voltage -18 V to 18 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 38,
        "cost_usd": 0.3026,
        "at": "2026-09-23T02:27:49"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/ina200",
        "pages": 38,
        "sha256": "62eed6fe49e56470",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ina201aidgkr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.1,
          2.0,
          0.85
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "353552981eef35cb93635057d4aeb89aef22648c77af6fd095e328bfe6b834bd",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ina201aidgkr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.1,
          2.0,
          0.85
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3ec065346777de3e16f1d28d3a98c8414f021086d2285a920e261678a492c657",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}