component
INA201AIDGKR
Public Made by Adomby adom
Texas Instruments Current Sense Amplifiers, VSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownINA201AIDGKR
Texas Instruments · Current Sense Amplifiers · VSSOP-8
INA201AIDGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VS | power_in | Supply voltage input, operating range 2.7 V to 18 V with maximum quiescent current 1800 μA. |
| 2 | OUT | output | Analog output voltage with 50 V/V gain, output swing from (GND + 0.004 V) to (VS - 0.15 V). |
| 3 | CMPIN | input | Comparator input terminal, voltage range 0 V to (VS - 1.5 V) with 10 nA maximum input bias current. |
| 4 | GND | power_in | Analog ground reference. |
| 5 | RESET | input | Comparator reset pin (active low), internal 2 MΩ pull-down with 1.5 μs minimum pulse width. |
| 6 | CMPOUT | tri_state | Open-drain comparator output, 1.3 μs typical response time, VOL 220-300 mV at IOL = 2.35 mA. |
| 7 | VIN- | power_in | Shunt negative input terminal, common-mode range -16 V to 80 V, differential voltage ±18 V. |
| 8 | VIN+ | power_in | Shunt positive input terminal, common-mode range -16 V to 80 V, differential voltage -18 V to 18 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
INA201AIDGKR - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
ina201aidgkr-etched.step/ina201aidgkr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina201aidgkr.step/ina201aidgkr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
62eed6fe49e56470, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).