main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ina201aidgkr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ina201aidgkr: viewers · Ray
ina201aidgkr-etched.fit.json ina201aidgkr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ina201aidgkr-etched.glb ina201aidgkr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ina201aidgkr-etched.step ina201aidgkr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ina201aidgkr.glb Publish 0.1.0 · Ray
ina201aidgkr.kicad_mod Publish 0.1.0 · Ray
ina201aidgkr.kicad_sym Publish 0.1.0 · Ray
ina201aidgkr.lbr Publish 0.1.0 · Ray
ina201aidgkr.step Publish 0.1.0 · Ray
package.json ina201aidgkr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json ina201aidgkr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/ina201aidgkr · Ray

INA201AIDGKR

Texas Instruments · Current Sense Amplifiers · VSSOP-8

INA201AIDGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VS power_in Supply voltage input, operating range 2.7 V to 18 V with maximum quiescent current 1800 μA.
2 OUT output Analog output voltage with 50 V/V gain, output swing from (GND + 0.004 V) to (VS - 0.15 V).
3 CMPIN input Comparator input terminal, voltage range 0 V to (VS - 1.5 V) with 10 nA maximum input bias current.
4 GND power_in Analog ground reference.
5 RESET input Comparator reset pin (active low), internal 2 MΩ pull-down with 1.5 μs minimum pulse width.
6 CMPOUT tri_state Open-drain comparator output, 1.3 μs typical response time, VOL 220-300 mV at IOL = 2.35 mA.
7 VIN- power_in Shunt negative input terminal, common-mode range -16 V to 80 V, differential voltage ±18 V.
8 VIN+ power_in Shunt positive input terminal, common-mode range -16 V to 80 V, differential voltage -18 V to 18 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Amplifiers/Comparators
Pins 8

CAD (KiCad official)

  • Symbol: INA201AIDGKR
  • Footprint: Package_SO:VSSOP-8_2.3x2mm_P0.5mm
  • 3D model: VSSOP-8 (KiCad packages3D, STEP)
  • 3D model files: ina201aidgkr-etched.step / ina201aidgkr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina201aidgkr.step / ina201aidgkr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (38 pp, sha256 62eed6fe49e56470, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF