by adom
0603 SMD Amber LED · 2.2 V drop · 25 mA max
| Name | Last updated |
|---|---|
| artwork | 18d ago |
| docs | 18d ago |
| ds | 2mo ago |
| footprint-variants | 18d ago |
| provenance | 21d ago |
| screenshots | 21d ago |
| adom-3d-viewer.min.js | 3mo ago |
| CHANGES.md | 14h ago |
| IN-S63BTA-fpview.html | 18d ago |
| in-s63bta-hero.glb | 17d ago |
| in-s63bta-hero.overlay.json | 18d ago |
| IN-S63BTA-outline.kicad_sym | 18d ago |
| IN-S63BTA-part.glb | 18d ago |
| IN-S63BTA-symview.html | 18d ago |
| IN-S63BTA-uncoloured.step | 21d ago |
| IN-S63BTA-viewer.html | 3mo ago |
| IN-S63BTA.adom-lbr.json | 18d ago |
| IN-S63BTA.glb | 18d ago |
| IN-S63BTA.html | 3mo ago |
| IN-S63BTA.insertion.glb | 18d ago |
| IN-S63BTA.kicad_mod | 14h ago |
| IN-S63BTA.kicad_sym | 4mo ago |
| IN-S63BTA.lbr | 18d ago |
| IN-S63BTA.step | 18d ago |
| IN-S63BTA.svg | 4mo ago |
| page.json | 18d ago |
| README.md | 18d ago |
Amber SMD LED 0603 - Inolux IN-S63BTA
Inolux Corporation IN-S63BTA: 0603 SMD Amber LED, 2.2 V drop, 25 mA max. An Adom Basic Part: Adom keeps it on reels for its pick-and-place line, so boards built with it draw on Adom stock.
Key specs
| Spec | Datasheet |
|---|---|
| 0603 top-view SMD LED in a clear-lens, PCB-type moulded package, 1.6 × 0.8 × 0.6 mm | p.1, p.9 |
| AlInGaP amber emitter, dominant wavelength 605 nm, peak 609 nm, spectral width Δλ 17 nm | p.3, p.8 |
| Forward voltage 2.2 V typ at the 20 mA test current | p.3 |
| Luminous intensity 140 mcd typ at 20 mA | p.3, p.8 |
| 120° viewing angle (2θ1/2) | p.3 |
| 25 mA max continuous forward current; 70 mA peak at 1/10 duty, 0.1 ms pulse | p.2 |
| 5 V max reverse voltage; 75 mW max power dissipation | p.2 |
| Operating −30 to +85 °C, storage −40 to +90 °C | p.2 |
| Moisture sensitive and ESD sensitive (AlInGaP), ships dry-packed in a sealed moisture-barrier anti-static bag | p.2, p.12 |
| Supplied on tape and reel, 4000 pcs per reel (EIA-481-1A conductive black carrier tape) | p.10, p.11 |
Notes for designers
IN-S63BTA is the amber member of Inolux's IN-S63BT series: a low-profile 0603 top-view indicator LED in a clear, PCB-type moulded package. (p.1) It uses the AlInGaP die family shared with the red and yellow variants, (p.8) sitting at a dominant wavelength of 605 nm. (p.3)
Budget 2.2 V across it at the 20 mA test point and it returns 140 mcd. (p.3) Drive it through a current-limiting resistor rather than straight off a rail, the datasheet says so explicitly (p.13), and keep continuous current at or below 25 mA. (p.2) At 3.3 V that is a (3.3 − 2.2) / 0.02 = 55 Ω resistor for the full 20 mA, and the drop is identical to the red variant's, so amber and red status lights can share one resistor value. (p.3)
One limit is tighter than the rest of the series: the AlInGaP colours are rated for only 70 mA peak pulse (1/10 duty, 0.1 ms), where the InGaN members get 100 mA (p.2), do not recycle a multiplexed drive designed for the blue or green parts. The 120° viewing angle (p.3) makes it a wide-angle indicator, and reverse voltage is rated to only 5 V. (p.2)
Footprint
Redrawn from the datasheet land pattern (the previous pads were off by up to 0.5 mm).
Source: Land pattern from Inolux IN-S63BT series datasheet V1.2, p.1 (Recommended Solder Pattern).
| mm | Datasheet | KiCad standard (LED_0603_1608Metric) | Previous | This page |
|---|---|---|---|---|
| Pad length (along the part) | 0.6 | 0.875 | 0.9 | 0.6 |
| Pad width | 0.9 | 0.95 | 1 | 0.9 |
| Gap between pads | 0.8 | 0.7 | 0.7 | 0.8 |
| Centre to centre | 1.4 | 1.575 | 1.6 | 1.4 |
| Overall | 2 | 2.45 | 2.5 | 2 |
| Corner radius | not specified | 0.2188 (ratio 0.25) | 0.225 (ratio 0.25) | square (as drawn) |
| Corners: square, as the datasheet draws them. The datasheet does not call for rounded corners, so the footprint does not add any. |
Polarity: pad 1 = K (cathode, -X), pad 2 = A, matching the symbol (K = pin 1, A = pin 2) and the datasheet's cathode mark; the silkscreen bracket marks the cathode end.
Chip outline
The part's 3D outline in the standard pose (pad 1 toward the viewer), drawn from the STEP by Adom's OpenCascade service; the part number sits where the laser-etched mark is on the 3D model and reads the same way.
Symbol options
The default symbol, IN-S63BTA.kicad_sym (the one in the Symbol & Footprint panel), is the plain standard symbol. IN-S63BTA-outline.kicad_sym is the same symbol with the part's 3D chip outline drawn beside it, its part number placed and reading as on the 3D model.
Ordering
| MPN | IN-S63BTA |
| Manufacturer | Inolux Corporation |
| Adom stock | Adom Basic Part, stocked on reels for Adom's pick-and-place line; reel counts on pnp-inventory |
| Other sources | adom-parts-search compares Mouser, DigiKey and JLCPCB |
Downloads
| File | What it is |
|---|---|
| IN-S63BTA.kicad_sym | KiCad symbol (standard symbol, the page default) |
| IN-S63BTA-outline.kicad_sym | KiCad symbol with the 3D chip outline |
| IN-S63BTA.kicad_mod | KiCad footprint (datasheet land pattern) |
| IN-S63BTA.step | 3D STEP with the part number laser-etched (default) |
| IN-S63BTA-uncoloured.step | 3D STEP before the colour and etch passes (the bare KiCad model) |
| IN-S63BTA.glb | 3D GLB of the etched model (board use) |
| IN-S63BTA.lbr | Fusion 360 / EAGLE library |
| IN-S63BTA.adom-lbr.json | adom-lbr part (converts to Altium, KiCad, EAGLE) |
| IN-S63BTA-datasheet.pdf | Datasheet (release asset) |
Provenance
- Datasheet: IN-S63BT series, Top View SMD LED 0603 PCB Type, V1.2 revised 10 March 2022, Inolux Corporation. Manufacturer copy.
md5 0a3f815d48308fe542a24a4a4ac7f0ce - Footprint: Land pattern from Inolux IN-S63BT series datasheet V1.2, p.1 (Recommended Solder Pattern). Pads redrawn on 2026-10-03.
- 3D model and symbol: unchanged by the footprint pass; the etched STEP adds a flat virtual part-number mark (an identification aid, not the maker's marking).
- Earlier passes: provenance/ and CHANGES.md.
More
- Datasheet pages: the 15 datasheet pages as images.
- Assembly animation: the part dropping onto its pads, and Adom's pick-and-place picking it from tape.