Green SMD LED 0402 - Inolux IN-S42ATG

{
 "schema": "adom/mark-plan@1",
 "mpn": "IN-S42ATG",
 "step": "/home/adom/project/basic-parts-overhaul/pages/in-s42atg/IN-S42ATG-uncoloured.step",
 "footprint": "/home/adom/project/basic-parts-overhaul/pages/in-s42atg/IN-S42ATG.kicad_mod",
 "standUp": [],
 "standUpSource": "as-is (Z up)",
 "face": "side",
 "pin1": {
  "source": "footprint pad 1",
  "xyMm": [
   -0.5,
   -0.0
  ],
  "corner": "left/middle"
 },
 "existingMarks": [],
 "vendorMarking": {
  "present": false,
  "glyphFaces": 0
 },
 "faceNormal": [
  0.0,
  -1.0,
  0.0
 ],
 "longAxis": {
  "axis": "x",
  "vector": [
   1.0,
   0.0,
   0.0
  ],
  "why": "long side wall (1.00 mm)",
  "override": null
 },
 "readingDirection": {
  "vector": [
   1.0,
   0.0,
   0.0
  ],
  "angleDeg": 0,
  "textUp": [
   -0.0,
   1.0,
   0.0
  ],
  "rule": "pin 1 / pad 1 at the start (left) of the text, and below it when it sits on a side"
 },
 "band": {
  "regionMm": [
   -0.35,
   0.1665,
   0.35,
   0.45
  ],
  "zMm": 0.25,
  "lengthMm": 0.7,
  "heightMm": 0.2835,
  "why": "flat high band of the side wall",
  "terminationsExcludedBy": null,
  "trimmedEnds": [],
  "keepouts": [],
  "sideTurn": {
   "axis": "x",
   "quarterTurns": 3,
   "textUpInTurnedFrame": [
    0,
    1,
    0
   ],
   "baselineInTurnedFrame": [
    1.0,
    0.0,
    -0.0
   ]
  },
  "margins": {
   "lengthEachSide": 0.12,
   "heightEachSide": 0.15
  }
 },
 "text": {
  "lines": [
   "IN-",
   "S42ATG"
  ],
  "chars": 9,
  "capHeightMm": 0.0863,
  "smallestLineMm": 0.0863,
  "heightPctOfBand": 70.0,
  "why": "two lines: the smaller line (0.086 mm) beats one line (0.074 mm) by 1.17x",
  "alternative": {
   "lines": [
    "IN-S42ATG"
   ],
   "capHeightMm": 0.0739,
   "smallestLineMm": 0.0739
  },
  "font": "service-step2glb /laser-etch (single-stroke outline font)"
 },
 "etch": {
  "poseQuarterTurnsZ": 0,
  "service": "/laser-etch?mode=flat",
  "note": "turn so the reading direction is +X, etch, fit the mark into the band, turn back"
 },
 "outline": {
  "upAxis": "z",
  "poseRotZDeg": 180,
  "rot": 180,
  "recipe": "adom-aiflow-etch outline <part.step> --footprint <part.kicad_mod> --mpn IN-S42ATG (stands the STEP up (as-is (Z up)), turns it 180 deg about Z and draws IN- / S42ATG on the planned band, rot 180)",
  "why": "iso camera looks from +X+Y+Z: text along +Y (rot 90) or -X (rot 180) reads left to right with pin 1 toward the viewer"
 },
 "widget": {
  "px": 320,
  "pxPerMm": 271.53,
  "capHeightPx": 19.1
 },
 "hints": [
  "LED detected (footprint/model name): the mark goes on the front long side wall, the window stays clear; --face top overrides",
  "LED: the top window stays clear; the mark goes on the front long wall"
 ],
 "warnings": [],
 "summary": "Mark along the 0.70 mm axis (+X), 0.09 mm text (2 lines), upright with pin 1 left middle, outline rot 180 after a 180 deg pose turn; ~19 px caps at 320 px"
}