main
Ray Publish 0.1.0 ada385a
{
  "slug": "hv9912ng-g",
  "version": "0.1.0",
  "type": "component",
  "description": "Microchip Tech LED Drivers, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "nixie tube driver-led driver",
    "hv9912ng-g",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "hv9912ng-g.kicad_sym",
    "hv9912ng-g.kicad_mod",
    "hv9912ng-g.glb",
    "hv9912ng-g.step",
    "hv9912ng-g.lbr",
    "docs/hero.png",
    "docs/hv9912ng-g-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "hv9912ng-g-hero.glb",
    "hv9912ng-g-hero.overlay.json",
    "hv9912ng-g-etched.glb"
  ],
  "component": {
    "mpn": "HV9912NG-G",
    "manufacturer": "Microchip Tech",
    "package": "SOIC-16",
    "pin_count": 16,
    "category": "Nixie Tube Driver/LED Driver",
    "subcategory": "LED Drivers",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/37aeefc646780a227cab0bdcd1167ce4.pdf",
    "parts": {
      "symbol": "hv9912ng-g.kicad_sym",
      "footprint": "hv9912ng-g.kicad_mod",
      "model_3d": "hv9912ng-g-hero.glb",
      "model_3d_plain": "hv9912ng-g-etched.glb",
      "model_3d_step": "hv9912ng-g-etched.step",
      "model_3d_step_plain": "hv9912ng-g.step",
      "lbr": "hv9912ng-g.lbr"
    },
    "distributor_links": {
      "lcsc": "C642158"
    },
    "distributor_check": {
      "checked_at": "2026-10-23T18:09:57Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "deferred",
        "error": "shared DigiKey quota guard: 887 calls left today"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VIN",
        "type": "power_in",
        "description": "Input of the 90V high-voltage linear regulator that powers the IC."
      },
      {
        "number": "2",
        "name": "VDD",
        "type": "power_out",
        "description": "Power supply pin for all internal circuits, regulated to 7.75V typical; must be bypassed with a low-ESR capacitor of at least 0.1 µF to GND."
      },
      {
        "number": "3",
        "name": "GATE",
        "type": "output",
        "description": "Output gate driver (+0.2A/-0.4A) for an external N-channel power MOSFET."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground return for all low-power analog internal circuitry; must be connected to the return path from the input."
      },
      {
        "number": "5",
        "name": "CS",
        "type": "input",
        "description": "Senses the source current of the external power FET and includes a built-in 100 ns (minimum) blanking time."
      },
      {
        "number": "6",
        "name": "SC",
        "type": "passive",
        "description": "Sets the slope compensation (current sourced out of the pin is 0 to 100 µA)."
      },
      {
        "number": "7",
        "name": "RT",
        "type": "passive",
        "description": "Sets the frequency of the power circuit; a resistor between RT and GND programs Constant Frequency mode."
      },
      {
        "number": "8",
        "name": "SYNC",
        "type": "bidirectional",
        "description": "I/O pin that may be connected to the SYNC pin of other HV9912 ICs, causing the oscillators to lock to the highest frequency oscillator."
      },
      {
        "number": "9",
        "name": "CLIM",
        "type": "input",
        "description": "Programmable input current limit for the converter, set using a resistor divider from the REF pin."
      },
      {
        "number": "10",
        "name": "REF",
        "type": "power_out",
        "description": "2% accurate reference voltage output; must be bypassed with a 0.01 µF-0.1 µF capacitor to GND."
      },
      {
        "number": "11",
        "name": "FAULT",
        "type": "output",
        "description": "Pulled to ground on an output short-circuit or output overvoltage condition; can drive an external MOSFET to disconnect the load from the source."
      },
      {
        "number": "12",
        "name": "OVP",
        "type": "input",
        "description": "Overvoltage protection input: GATE turns off and FAULT goes low when the voltage exceeds 5V, and the IC turns on again when it falls below 4.5V."
      },
      {
        "number": "13",
        "name": "PWMD",
        "type": "input",
        "description": "PWM dimming input: switching is disabled when pulled to GND or left open, and resumes when an external TTL high level is applied."
      },
      {
        "number": "14",
        "name": "COMP",
        "type": "passive",
        "description": "Connection for the closed-loop compensation network to GND; the capacitor also controls the hiccup time."
      },
      {
        "number": "15",
        "name": "IREF",
        "type": "input",
        "description": "The voltage at this pin sets the output current level, set using a resistor divider from the REF pin."
      },
      {
        "number": "16",
        "name": "FDBK",
        "type": "input",
        "description": "Provides output current feedback to the IC using a current sense resistor."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin types for SC, RT and COMP (passive) and the VDD/REF output direction are inferred from the descr"
        ],
        "pages_sent": 9,
        "cost_usd": 0.0819,
        "at": "2026-10-23T18:09:41"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/37aeefc646780a227cab0bdcd1167ce4.pdf",
        "pages": 20,
        "sha256": "95071e3a782fc328",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "hv9912ng-g.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "hv9912ng-g-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7678afa4fdff658c1b18b34ce6bac9b070b9be9064af480524177425de2bfb09",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}