main
Ray
Publish 0.1.0
235a4a9
HLP2992AIM5X-3.3
HXY MOSFET · Linear Voltage Regulators (LDO) · SOT-23-5L
HLP2992AIM5X-3.3 from HXY MOSFET, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Unregulated input supply; the datasheet gives an input voltage of 16 V maximum for operation, with an absolute maximum rating of -0.3 V to +18 V. |
| 2 | GND | power_in | Ground reference pin for the regulator. |
| 3 | CE | input | Enable control port that puts the regulator into sleep mode; the datasheet does not state the active logic level. |
| 4 | NC | unconnected | No connect pin; it is not connected internally and is left unconnected on the board. |
| 5 | VOUT | power_out | Regulated output, rated for an output current of at least 250 mA with a stabilization capacitor (10 µF used in the test conditions). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOT-23-5L |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | 3.234 | 3.3 | 3.366 | V | VIN=VOUT+2.0V, IOUT=10mA | 3 |
| Output Current | IOUT | 250 | mA | VIN=VOUT+2.0V | 3 | ||
| Load Regulation | ΔVOUT | 25 | 100 | mV | VIN=VOUT+2.0V, 1mA≤IOUT≤50mA | 3 | |
| Voltage Drop | VDIF | 30 | 80 | mV | IOUT=1mA, ΔVOUT=2% | 3 | |
| Quiescent Current | ISS | 8 | 10 | μA | No Load | 3 | |
| Line Regulation | ΔVOUT/VOUT*ΔVIN | 0.2 | %/V | VOUT+1.0V≤VIN≤16V, IOUT=1mA | 3 | ||
| Input Voltage | VIN | 16 | V | 3 | |||
| Input Voltage (absolute maximum) | VIN | -0.3 | 18 | V | 2 | ||
| Storage Temperature Range | TSTG | -50 | 125 | ℃ | 2 | ||
| Operating Free-air Temperature Range | TA | -30 | 85 | ℃ | 2 | ||
| Power dissipation | PW | 200 | mW | 2 | |||
| Thermal resistance, junction to ambient | θJA | 500 | ℃/W | 2 |
CAD (KiCad official)
- Symbol:
HLP2992AIM5X-3.3 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.25 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
hlp2992aim5x-3-3-etched.step/hlp2992aim5x-3-3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hlp2992aim5x-3-3.step/hlp2992aim5x-3-3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (6 pp, sha256
e2c9ca3e65447356, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HLP2992AIM5X-3.3
**HXY MOSFET** · Linear Voltage Regulators (LDO) · SOT-23-5L
HLP2992AIM5X-3.3 from HXY MOSFET, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Unregulated input supply; the datasheet gives an input voltage of 16 V maximum for operation, with an absolute maximum rating of -0.3 V to +18 V. |
| 2 | GND | power_in | Ground reference pin for the regulator. |
| 3 | CE | input | Enable control port that puts the regulator into sleep mode; the datasheet does not state the active logic level. |
| 4 | NC | unconnected | No connect pin; it is not connected internally and is left unconnected on the board. |
| 5 | VOUT | power_out | Regulated output, rated for an output current of at least 250 mA with a stabilization capacitor (10 µF used in the test conditions). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOT-23-5L |
| Category | Power Management ICs |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | 3.234 | 3.3 | 3.366 | V | VIN=VOUT+2.0V, IOUT=10mA | 3 |
| Output Current | IOUT | 250 | | | mA | VIN=VOUT+2.0V | 3 |
| Load Regulation | ΔVOUT | | 25 | 100 | mV | VIN=VOUT+2.0V, 1mA≤IOUT≤50mA | 3 |
| Voltage Drop | VDIF | | 30 | 80 | mV | IOUT=1mA, ΔVOUT=2% | 3 |
| Quiescent Current | ISS | | 8 | 10 | μA | No Load | 3 |
| Line Regulation | ΔVOUT/VOUT*ΔVIN | | | 0.2 | %/V | VOUT+1.0V≤VIN≤16V, IOUT=1mA | 3 |
| Input Voltage | VIN | | | 16 | V | | 3 |
| Input Voltage (absolute maximum) | VIN | -0.3 | | 18 | V | | 2 |
| Storage Temperature Range | TSTG | -50 | | 125 | ℃ | | 2 |
| Operating Free-air Temperature Range | TA | -30 | | 85 | ℃ | | 2 |
| Power dissipation | PW | | 200 | | mW | | 2 |
| Thermal resistance, junction to ambient | θJA | | 500 | | ℃/W | | 2 |
## CAD (KiCad official)
- Symbol: `HLP2992AIM5X-3.3`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5L, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.25 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `hlp2992aim5x-3-3-etched.step` / `hlp2992aim5x-3-3-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hlp2992aim5x-3-3.step` / `hlp2992aim5x-3-3.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HXY MOSFET datasheet](docs/hlp2992aim5x-3-3-datasheet.pdf) (6 pp, sha256 `e2c9ca3e65447356`, retrieved 2026-11-12, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hlp2992aim5x-3-3-datasheet.pdf)