3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHLP2992AIM5X-3.3
HXY MOSFET · Linear Voltage Regulators (LDO) · SOT-23-5L
HLP2992AIM5X-3.3 from HXY MOSFET, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Unregulated input supply; the datasheet gives an input voltage of 16 V maximum for operation, with an absolute maximum rating of -0.3 V to +18 V. |
| 2 | GND | power_in | Ground reference pin for the regulator. |
| 3 | CE | input | Enable control port that puts the regulator into sleep mode; the datasheet does not state the active logic level. |
| 4 | NC | unconnected | No connect pin; it is not connected internally and is left unconnected on the board. |
| 5 | VOUT | power_out | Regulated output, rated for an output current of at least 250 mA with a stabilization capacitor (10 µF used in the test conditions). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOT-23-5L |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | 3.234 | 3.3 | 3.366 | V | VIN=VOUT+2.0V, IOUT=10mA | 3 |
| Output Current | IOUT | 250 | mA | VIN=VOUT+2.0V | 3 | ||
| Load Regulation | ΔVOUT | 25 | 100 | mV | VIN=VOUT+2.0V, 1mA≤IOUT≤50mA | 3 | |
| Voltage Drop | VDIF | 30 | 80 | mV | IOUT=1mA, ΔVOUT=2% | 3 | |
| Quiescent Current | ISS | 8 | 10 | μA | No Load | 3 | |
| Line Regulation | ΔVOUT/VOUT*ΔVIN | 0.2 | %/V | VOUT+1.0V≤VIN≤16V, IOUT=1mA | 3 | ||
| Input Voltage | VIN | 16 | V | 3 | |||
| Input Voltage (absolute maximum) | VIN | -0.3 | 18 | V | 2 | ||
| Storage Temperature Range | TSTG | -50 | 125 | ℃ | 2 | ||
| Operating Free-air Temperature Range | TA | -30 | 85 | ℃ | 2 | ||
| Power dissipation | PW | 200 | mW | 2 | |||
| Thermal resistance, junction to ambient | θJA | 500 | ℃/W | 2 |
CAD (KiCad official)
- Symbol:
HLP2992AIM5X-3.3 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.25 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
hlp2992aim5x-3-3-etched.step/hlp2992aim5x-3-3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hlp2992aim5x-3-3.step/hlp2992aim5x-3-3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (6 pp, sha256
e2c9ca3e65447356, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).