main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers hlp2992aim5x-3-3: viewers rendered from the public page · Ray
hlp2992aim5x-3-3-etched.glb Publish 0.1.0 · Ray
hlp2992aim5x-3-3-etched.step hlp2992aim5x-3-3: factory component page (tier=lcsc) · Ray
hlp2992aim5x-3-3-hero.glb hlp2992aim5x-3-3: hero GLB from the etched model (keeps the MPN mark) · Ray
hlp2992aim5x-3-3-hero.overlay.json hlp2992aim5x-3-3: hero GLB from the etched model (keeps the MPN mark) · Ray
hlp2992aim5x-3-3.glb Publish 0.1.0 · Ray
hlp2992aim5x-3-3.kicad_mod Publish 0.1.0 · Ray
hlp2992aim5x-3-3.kicad_sym Publish 0.1.0 · Ray
hlp2992aim5x-3-3.lbr Publish 0.1.0 · Ray
hlp2992aim5x-3-3.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 5 pins · Ray

HLP2992AIM5X-3.3

HXY MOSFET · Linear Voltage Regulators (LDO) · SOT-23-5L

HLP2992AIM5X-3.3 from HXY MOSFET, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Unregulated input supply; the datasheet gives an input voltage of 16 V maximum for operation, with an absolute maximum rating of -0.3 V to +18 V.
2 GND power_in Ground reference pin for the regulator.
3 CE input Enable control port that puts the regulator into sleep mode; the datasheet does not state the active logic level.
4 NC unconnected No connect pin; it is not connected internally and is left unconnected on the board.
5 VOUT power_out Regulated output, rated for an output current of at least 250 mA with a stabilization capacitor (10 µF used in the test conditions).

Key specifications

Parameter Value
Manufacturer HXY MOSFET
Package SOT-23-5L
Category Power Management ICs
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage VOUT 3.234 3.3 3.366 V VIN=VOUT+2.0V, IOUT=10mA 3
Output Current IOUT 250 mA VIN=VOUT+2.0V 3
Load Regulation ΔVOUT 25 100 mV VIN=VOUT+2.0V, 1mA≤IOUT≤50mA 3
Voltage Drop VDIF 30 80 mV IOUT=1mA, ΔVOUT=2% 3
Quiescent Current ISS 8 10 μA No Load 3
Line Regulation ΔVOUT/VOUT*ΔVIN 0.2 %/V VOUT+1.0V≤VIN≤16V, IOUT=1mA 3
Input Voltage VIN 16 V 3
Input Voltage (absolute maximum) VIN -0.3 18 V 2
Storage Temperature Range TSTG -50 125 ℃ 2
Operating Free-air Temperature Range TA -30 85 ℃ 2
Power dissipation PW 200 mW 2
Thermal resistance, junction to ambient θJA 500 ℃/W 2

CAD (KiCad official)

  • Symbol: HLP2992AIM5X-3.3
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5L, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.25 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: hlp2992aim5x-3-3-etched.step / hlp2992aim5x-3-3-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hlp2992aim5x-3-3.step / hlp2992aim5x-3-3.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HXY MOSFET datasheet (6 pp, sha256 e2c9ca3e65447356, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF