main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers hga82c250m: viewers · Ray
hga82c250m-etched.glb Publish 0.1.0 · Ray
hga82c250m-etched.step hga82c250m: factory component page (tier=lcsc) · Ray
hga82c250m-hero.glb hga82c250m: hero GLB from the etched model (keeps the MPN mark) · Ray
hga82c250m-hero.overlay.json Publish 0.1.0 · Ray
hga82c250m.glb Publish 0.1.0 · Ray
hga82c250m.kicad_mod Publish 0.1.0 · Ray
hga82c250m.kicad_sym Publish 0.1.0 · Ray
hga82c250m.lbr Publish 0.1.0 · Ray
hga82c250m.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

HGA82C250M

HGSEMI · CAN Transceivers · SOP-8

HGA82C250M from HGSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 TXD input Transmitter data input: a low level drives the bus dominant (CANH high, CANL low) and a high or floating level makes it recessive; the MCU-side port is rated -0.3 V to VCC+0.3 V.
2 GND power_in Ground reference for the device; all voltages in the datasheet are referenced to this pin.
3 VCC power_in Supply voltage input, 4.5 V to 5.5 V recommended, with an absolute maximum of -0.3 V to +7 V.
4 RXD output Receiver data output that goes low when the bus is dominant, with VOH of at least 0.8VCC at -100 µA and VOL of at most 0.2VCC at 1 mA.
5 VREF power_out Reference voltage output of 0.45VCC to 0.55VCC when
6 CANL bidirectional Low-level CAN bus line input/output that withstands -36 V to +36 V, with a short-circuit current of at most 200 mA at V6 = +36 V.
7 CANH bidirectional High-level CAN bus line input/output that withstands -36 V to +36 V, with a short-circuit current of -100 mA to -200 mA at V7 = -36 V.
8 Rs input Mode/slope control input: tie to GND for high-speed mode, use a resistor to GND for slope control (0.4VCC to 0.6VCC), and drive above 0.75VCC for low-power standby.

Key specifications

Parameter Value
Manufacturer HGSEMI
Package SOP-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage Vcc 4.5 5.5 V 3
CANH, CANL input/output voltage Vcan -36 36 V 3
Bus differential voltage Vdiff 1.5 3 V 3
Ambient temperature Tamb -40 125 ℃ 3
Supply voltage VCC -0.3 7 V 2
CANL, CANH bus-side input voltage -36 36 V 2
Pin 6,7 transient voltage Vtr -200 200 V see Figure 7 2
Storage temperature -55 150 ℃ 2
Ambient temperature -40 125 ℃ 2
Lead soldering temperature TLEAD 245 ℃ 10 s 2
Continuous power dissipation 400 mW SOP8 2
High-level input current VIH -200 30 uA V1=4V 3
Low-level input current VIL -600 -100 uA V1=1V 3
Low-level input voltage VIL -0.3 V input recessive 3
Recessive bus voltage V6,7 2 3 V V1=4V, no load 3
Off-state output leakage current ILO -2 2 mA -2V<(V6,V7)<-7V 3
Off-state output leakage current ILO -10 10 mA -5V<(V6,V7)<36V 3
CANH output voltage V7 3 4.5 V V1=1V, VCC=4.75~5.5V 3
CANH output voltage V7 2.75 4.5 V V1=1V, VCC=4.75~5.5V 3
CANL output voltage V6 0.5 2 V V1=1V 3
Differential output voltage ΔV6,7 1.5 3 V V1=1V 3
Differential output voltage ΔV6,7 -500 50 mV V1=4V, no load 3
CANH short-circuit current Isc7 -200 -100 mA V7=-36V 3
Recessive differential input voltage Vdiff(r) -1 0.5 V NOTE1 4
Recessive differential input voltage Vdiff(r) -1 0.4 V -7V<(V6,V7)<12V; NOTE1 4
Dominant differential input voltage Vdiff(d) 0.9 5 V -7V<(V6,V7)<12V 4
Dominant differential input voltage Vdiff(d) 1 5 V -7V<(V6,V7)<12V, non-standby mode 4
Dominant differential input voltage Vdiff(d) 0.97 5 V standby mode 4
Dominant differential input voltage Vdiff(d) 0.91 5 V VCC=4.5~5.1V, standby mode 4
VOL low-level output voltage, Pin 4 VOL 0 V I4=1mA 4
VOL low-level output voltage, Pin 4 VOL 0 1.5 V I4=10mA 4
CANH, CANL input impedance Ri 5 25 KΩ 4
Differential input impedance Rdiff 20 100 KΩ 4
TXD to bus inactive delay toffTXD 40 80 ns R8=0Ω 5
TXD to receiver active delay tonRXD 55 120 ns R8=0Ω 5
TXD to receiver inactive delay toffRXD 100 190 ns R8=0Ω 5
TXD to receiver inactive delay toffRXD 300 400 ns R8=47KΩ 5
Standby mode input voltage slope-control current Islope -200 -10 uA 5
Supply current, dominant I3 78 mA dominant; V1=1V; VCC<5.1V 5
Supply current, dominant I3 80 mA dominant; V1=1V; VCC<5.25V 5
Supply current, dominant I3 85 mA dominant; V1=1V; VCC<5.5V 5
Supply current, recessive I3 10 mA recessive; V1=4V; R8=47kΩ 5
Supply current, standby I3 275 uA standby mode; NOTE2 5
Supply current, standby Icc 275 uA standby mode 3
Maximum transmission rate 1/tbit 1 Mbaud NRZ code 3
Minimum bit time tbit 1 us R8=0Ω 5
TXD to bus active delay tonTXD 50 ns R8=0Ω 5
CANH, CANL slew rate /SR/ 7 V/us R8=47KΩ 5
Wake-up delay from standby via pin 8 twake 20 us see Figure 5 5
Bus dominant to RXD low delay in standby tdRXDL 3 us V8=4V; see Figure 6 5
Differential input hysteresis Vdiff(hys) 150 mV see Figure 4 4
Differential output voltage ΔV6,7 1.5 V V1=1V, RL=45Ω 3
CANL short-circuit current Isc6 200 mA V6=+36V 3

CAD (KiCad official)

  • Symbol: HGA82C250M
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: hga82c250m-etched.step / hga82c250m-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hga82c250m.step / hga82c250m.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet (12 pp, sha256 cdda93dd2508e837, retrieved 2026-10-19, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF