main
Ray Publish 0.1.0 32d77b3
{
  "slug": "hga82c250m",
  "version": "0.1.0",
  "type": "component",
  "description": "HGSEMI CAN Transceivers, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "hga82c250m",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "hga82c250m.kicad_sym",
    "hga82c250m.kicad_mod",
    "hga82c250m.glb",
    "hga82c250m.step",
    "hga82c250m.lbr",
    "docs/hero.png",
    "docs/hga82c250m-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "hga82c250m-hero.glb",
    "hga82c250m-hero.overlay.json",
    "hga82c250m-etched.glb"
  ],
  "component": {
    "mpn": "HGA82C250M",
    "manufacturer": "HGSEMI",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Interface",
    "subcategory": "CAN Transceivers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603515460092637184",
    "parts": {
      "symbol": "hga82c250m.kicad_sym",
      "footprint": "hga82c250m.kicad_mod",
      "model_3d": "hga82c250m-hero.glb",
      "model_3d_plain": "hga82c250m-etched.glb",
      "model_3d_step": "hga82c250m-etched.step",
      "model_3d_step_plain": "hga82c250m.step",
      "lbr": "hga82c250m.lbr"
    },
    "distributor_links": {
      "lcsc": "C30170093"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T00:39:52Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "TXD",
        "type": "input",
        "description": "Transmitter data input: a low level drives the bus dominant (CANH high, CANL low) and a high or floating level makes it recessive; the MCU-side port is rated -0.3 V to VCC+0.3 V."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device; all voltages in the datasheet are referenced to this pin."
      },
      {
        "number": "3",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage input, 4.5 V to 5.5 V recommended, with an absolute maximum of -0.3 V to +7 V."
      },
      {
        "number": "4",
        "name": "RXD",
        "type": "output",
        "description": "Receiver data output that goes low when the bus is dominant, with VOH of at least 0.8VCC at -100 µA and VOL of at most 0.2VCC at 1 mA."
      },
      {
        "number": "5",
        "name": "VREF",
        "type": "power_out",
        "description": "Reference voltage output of 0.45VCC to 0.55VCC when |I5| is below 50 µA."
      },
      {
        "number": "6",
        "name": "CANL",
        "type": "bidirectional",
        "description": "Low-level CAN bus line input/output that withstands -36 V to +36 V, with a short-circuit current of at most 200 mA at V6 = +36 V."
      },
      {
        "number": "7",
        "name": "CANH",
        "type": "bidirectional",
        "description": "High-level CAN bus line input/output that withstands -36 V to +36 V, with a short-circuit current of -100 mA to -200 mA at V7 = -36 V."
      },
      {
        "number": "8",
        "name": "Rs",
        "type": "input",
        "description": "Mode/slope control input: tie to GND for high-speed mode, use a resistor to GND for slope control (0.4VCC to 0.6VCC), and drive above 0.75VCC for low-power standby."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin types for VREF (power_out vs output) and the CANH/CANL bus pins (bidirectional) are classificati"
        ],
        "pages_sent": 12,
        "cost_usd": 0.0461,
        "at": "2026-10-19T00:37:25"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603515460092637184",
        "pages": 12,
        "sha256": "cdda93dd2508e837",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "hga82c250m.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "hga82c250m-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "84fb7e75c244742fa3b1f1d2392ef0be136b9a9d3771775905b577650117063c",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}