main
Download ZIP Propose a change
Generated by adom_assets · KiCad file format 20240108
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers hd3ss3220irnhr: viewers · Ray
hd3ss3220irnhr-etched.glb hd3ss3220irnhr: factory component page (tier=mfr) · Ray
hd3ss3220irnhr-etched.step hd3ss3220irnhr: factory component page (tier=mfr) · Ray
hd3ss3220irnhr-hero.glb hd3ss3220irnhr: hero GLB from the etched model (keeps the MPN mark) · Ray
hd3ss3220irnhr-hero.overlay.json hd3ss3220irnhr: hero GLB from the etched model (keeps the MPN mark) · Ray
hd3ss3220irnhr.glb Publish 0.1.0 · Ray
hd3ss3220irnhr.kicad_mod Publish 0.1.0 · Ray
hd3ss3220irnhr.kicad_sym Publish 0.1.0 · Ray
hd3ss3220irnhr.lbr Publish 0.1.0 · Ray
hd3ss3220irnhr.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 31 pins · Ray

HD3SS3220IRNHR

Texas Instruments · USB Converters · WQFN-30-EP(2.5x4.5)

HD3SS3220IRNHR from Texas Instruments, in a WQFN-30-EP(2.5x4.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 CC2 bidirectional Type-C Configuration channel signal 2 that the CC logic monitors for pull-up or pull-down resistances to detect attach, port role and cable orientation.
2 CC1 bidirectional Type-C Configuration channel signal 1 that the CC logic monitors for pull-up or pull-down resistances to detect attach, port role and cable orientation.
3 CURRENT_MODE input Tri-level input that selects the advertised Type-C current in DFP or DRP-as-DFP GPIO mode: L for 900 mA default, M (500K to VDD5) for 1.5 A, and H (10K to VDD5) for 3 A.
4 PORT input Tri-level input sampled when ENn_CC is asserted low and VDD5 is active to select DFP (pull-up to VDD5), DRP (unconnected) or UFP (pull-down to GND) mode.
5 VBUS_DET input 5 V to 28 V VBUS input for UFP attachment detection, requiring one external 900 kΩ resistor between system VBUS and this pin.
6 TXp bidirectional Host/device USB SuperSpeed differential TX positive signal of the 2:1 mux.
7 TXn bidirectional Host/device USB SuperSpeed differential TX negative signal of the 2:1 mux.
8 VCC33 power_in 3.3 V power supply input for the device.
9 RXp bidirectional Host/device USB SuperSpeed differential RX positive signal of the 2:1 mux.
10 RXn bidirectional Host/device USB SuperSpeed differential RX negative signal of the 2:1 mux.
11 DIR output Open-drain Type-C plug orientation output that requires a pull-up resistor of about 200 kΩ for proper operation.
12 ENn_MUX input Active-low MUX enable where low selects normal operation and high selects shutdown.
13 GND power_in Ground reference for the device.
14 RX1n bidirectional Type-C port USB SuperSpeed differential RX1 negative signal.
15 RX1p bidirectional Type-C port USB SuperSpeed differential RX1 positive signal.
16 TX1n bidirectional Type-C port USB SuperSpeed differential TX1 negative signal.
17 TX1p bidirectional Type-C port USB SuperSpeed differential TX1 positive signal.
18 RX2n bidirectional Type-C port USB SuperSpeed differential RX2 negative signal.
19 RX2p bidirectional Type-C port USB SuperSpeed differential RX2 positive signal.
20 TX2n bidirectional Type-C port USB SuperSpeed differential TX2 negative signal.
21 TX2p bidirectional Type-C port USB SuperSpeed differential TX2 positive signal.
22 ADDR input Tri-level input selecting I2C address 0x67 when tied high to VDD5, GPIO mode when left unconnected, or I2C address 0x47 when tied low to GND.
23 INT_N/OUT3 output Dual-function open-drain output that is an active-low I2C interrupt (INT_N) in I2C mode and an audio accessory detect output (OUT3, low when detected) in GPIO mode; it is a no connect on HD3SS3220L.
24 VCONN_FAULT_N output Open-drain output asserted low when a VCONN overcurrent condition is detected.
25 SDA/OUT1 bidirectional Dual-function pin that is the I2C data signal when I2C is enabled and an open-drain UFP current-mode output (high for default 900 mA, low for 1.5 A or 3 A) in GPIO mode.
26 SCL/OUT2 bidirectional Dual-function pin that is the I2C clock signal when I2C is enabled and an open-drain UFP current-mode output (high for default or 1.5 A, low for 3 A) in GPIO mode.
27 ID output Open-drain output asserted low when a device attachment is detected on the CC pins while the port acts as a source (DFP) or as a DRP acting as DFP.
28 GND power_in Ground reference for the device.
29 ENn_CC input Active-low enable for the CC controller.
30 VDD5 power_in 5 V power supply input for the device.
31 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WQFN-30-EP(2.5x4.5)
Category Interface
Pins 31

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
5V Supply Voltage VDD5 -0.3 6 V 5
3.3V Supply Voltage VCC33 -0.3 4 V 5
CC pins voltage CC1, CC2 -0.3 6 V 5
VBUS_DET voltage VBUS_DET -0.3 4 V 5
Super-speed differential signal pins -0.3 2.5 V [RX/TX][p/n], [RX/TX][2/1][p/n] 5
Storage temperature Tstg -65 150 °C 5
5V Supply Voltage range VDD5 4.5 5.5 V 5
3.3V Supply Voltage range VCC33 3 3.6 V 5
Supply range for I2C (SDA, SCL) pins VDD 1.65 3.6 V 5
VDD5 supply ramp time VDD5(ramp) 25 ms 5
High speed signal pins differential voltage V(diff) 0 1.8 VPP 5
High speed signal pins common mode voltage V(cm) 0 2 V 5
Operating free-air/ambient temperature TA -40 85 °C HD3SS3220I 5
System V(BUS) input voltage through 900K resistor V(BUS) 4 5 28 V through 900K resistor 5
Bulk capacitance on VCONN C(BULK) 10 200 µF Only when VCONN is on; placed on VDD5 5
External resistor on VBUS_DET pin R(VBUS) 880 900 910 KΩ 6
Pulldown resistor in dead-battery mode R(CC_DB) 4.1 5.1 6.1 kΩ 6
Pulldown resistor in UFP or DRP mode R(CC_D) 4.6 5.1 5.6 kΩ 6
Voltage level for detecting a DFP attach as UFP, default current V(UFP_CC_USB) 0.25 0.61 V DFP advertising default current source capability 6
Voltage level for detecting a DFP attach as UFP, medium current V(UFP_CC_MED) 0.7 1.16 V DFP advertising medium (1.5A) current source capability 6
Voltage level for detecting a DFP attach as UFP, high current V(UFP_CC_HIGH) 1.31 2.04 V DFP advertising high (3A) current source capability 6
Voltage level for detecting a UFP attach as DFP, default current V(DFP_CC_USB) 1.51 1.6 1.64 V configured as DFP advertising default current 6
Voltage level for detecting a UFP attach as DFP, 1.5A V(DFP_CC_MED) 1.51 1.6 1.64 V configured as DFP advertising 1.5A 6
Voltage level for detecting a UFP attach as DFP, 3A V(DFP_CC_HIGH) 2.46 2.6 2.74 V configured as DFP advertising 3A 6
Voltage level for detecting an active cable attach as DFP, default current V(AC_CC_USB) 0.15 0.2 0.25 V configured as DFP advertising default current 6
Voltage level for detecting an active cable attach as DFP, 1.5A V(AC_CC_MED) 0.35 0.4 0.45 V configured as DFP advertising 1.5A 6
Voltage level for detecting an active cable attach as DFP, 3A V(DFP_CC_HIGH) 0.75 0.8 0.84 V active cable attach, configured as DFP advertising 3A 7
Default mode pull-up current source (DFP or DRP) ICC(DEFAULT_P) 64 80 96 µA 7
Medium (1.5A) mode pull-up current source (DFP or DRP) ICC(MED_P) 166 180 194 µA 7
High (3A) mode pull-up current source (DFP or DRP) ICC(HIGH_P) 34 330 356 µA as printed 7
Low-level input current IIL -10 10 µA 7
Current leakage on ID pin IID(LKG) 10 µA VDD5 = 0V, ID = 5V 7
High-level input current (ENn_MUX) IIH -1 1 µA ENn_MUX input 7
Low-level input current (ENn_MUX) IIL -1 1 µA ENn_MUX input 7
Low-level signal output voltage (open drain) VOL 0.4 V OUT1, OUT2, INT_N/OUT3, ID, VCONN_FAULT_N, DIR; IOL = -1.6mA 7
High-level input voltage (I2C SDA/OUT1, SCL/OUT2) VIH 1.05 V I2C pins operating from 1.8/3.3V (±10%) 7
VBUS threshold range V(BUS_THR) 2.95 3.3 3.8 V VBUS_DET IO pin 7
External resistor between VBUS and VBUS_DET pin RVBUS 855 887 920 KΩ 7
VCONN current limit I(VCONN) 225 300 375 mA VCONN disconnected above this value 7
Current consumption in active mode, both CC controller and SS mux on I(ACTIVE) 0.7 0.9 mA ENn_CC/Mux = L 6
Current consumption in shutdown mode I(SHUTDOWN) 5 µA ENn_CC/Mux = H 6
Data setup time tSU:DAT 100 ns I2C (SDA, SCL) 8
Data setup time (as printed) tHD:DAT 10 ns I2C (SDA, SCL) 8
Set-up time, SCL to start condition tSU;STA 0.6 µs I2C (SDA, SCL) 8
Data valid time tVD;DAT 0.9 µs I2C (SDA, SCL) 8
Bus free time between a STOP and START condition tBUF 1.3 µs I2C (SDA, SCL) 8
Rise time of both SDA and SCL signals tr 300 ns I2C (SDA, SCL) 8
Fall time of both SDA and SCL signals tf 300 ns I2C (SDA, SCL) 8
Total capacitive load for each bus line at ≤100KHz CBUS_100KHZ 400 pF operating at ≤100KHz 8
Total capacitive load for each bus line at 400KHz CBUS_400KHZ 100 pF operating at 400KHz 8
SCL clock frequency; I2C mode for local I2C control fSCL 400 ns as printed (unit ns) 8
Switching time DIR-to-Switch ON tSW_ON 0.5 µs See Figure 5-2 8
Switching time DIR-to-Switch OFF tSW_OFF 0.5 µs See Figure 5-2 8
ENn_CC high after both VDD5 and VCC33 stable tENnCC_HI 2 ms Refer to Figure 6-3 8
VDD5 stable before VCC33 tVDD5V_PG 2 ms Refer to Figure 6-2 8
Data valid acknowledge time tVD;ACK 0.9 µs I2C (SDA, SCL) 8
Junction-to-ambient thermal resistance RθJA 60.9 °C/W RNH (VQFN), 30 pins 6
Junction-to-case (top) thermal resistance RθJC(top) 50.4 °C/W RNH (VQFN), 30 pins 6
Junction-to-board thermal resistance RθJB 22.8 °C/W RNH (VQFN), 30 pins 6

CAD (Adom-generated)

  • Symbol: HD3SS3220IRNHR
  • Footprint: Adom_Gen:Texas_Instruments_HD3_af6467
  • 3D model: generated to fit the land (STEP)
  • 3D model files: hd3ss3220irnhr-etched.step / hd3ss3220irnhr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hd3ss3220irnhr.step / hd3ss3220irnhr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (48 pp, sha256 44ad645ff24f1bf2, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.

Datasheet PDF