main
Ray
Publish 0.1.0
5fdb8bc
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332
{
"slug": "hd3ss3220irnhr",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments USB Converters, WQFN-30-EP(2.5x4.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"interface",
"hd3ss3220irnhr",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"hd3ss3220irnhr.kicad_sym",
"hd3ss3220irnhr.kicad_mod",
"hd3ss3220irnhr.glb",
"hd3ss3220irnhr.step",
"hd3ss3220irnhr.lbr",
"docs/hero.png",
"docs/hd3ss3220irnhr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"hd3ss3220irnhr-hero.glb",
"hd3ss3220irnhr-hero.overlay.json"
],
"component": {
"mpn": "HD3SS3220IRNHR",
"manufacturer": "Texas Instruments",
"package": "WQFN-30-EP(2.5x4.5)",
"pin_count": 31,
"category": "Interface",
"subcategory": "USB Converters",
"datasheet": "https://www.ti.com/lit/ds/symlink/hd3ss3220.pdf",
"parts": {
"symbol": "hd3ss3220irnhr.kicad_sym",
"footprint": "hd3ss3220irnhr.kicad_mod",
"model_3d": "hd3ss3220irnhr-hero.glb",
"model_3d_plain": "hd3ss3220irnhr.glb",
"model_3d_step": "hd3ss3220irnhr-etched.step",
"model_3d_step_plain": "hd3ss3220irnhr.step",
"lbr": "hd3ss3220irnhr.lbr"
},
"distributor_links": {
"lcsc": "C701817",
"digikey": "296-51123-1-ND",
"mouser": "595-HD3SS3220IRNHR"
},
"distributor_check": {
"checked_at": "2026-11-17T00:05:15Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-51123-1-ND",
"status": "found"
},
"mouser": {
"pn": "595-HD3SS3220IRNHR",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "CC2",
"type": "bidirectional",
"description": "Type-C Configuration channel signal 2 that the CC logic monitors for pull-up or pull-down resistances to detect attach, port role and cable orientation."
},
{
"number": "2",
"name": "CC1",
"type": "bidirectional",
"description": "Type-C Configuration channel signal 1 that the CC logic monitors for pull-up or pull-down resistances to detect attach, port role and cable orientation."
},
{
"number": "3",
"name": "CURRENT_MODE",
"type": "input",
"description": "Tri-level input that selects the advertised Type-C current in DFP or DRP-as-DFP GPIO mode: L for 900 mA default, M (500K to VDD5) for 1.5 A, and H (10K to VDD5) for 3 A."
},
{
"number": "4",
"name": "PORT",
"type": "input",
"description": "Tri-level input sampled when ENn_CC is asserted low and VDD5 is active to select DFP (pull-up to VDD5), DRP (unconnected) or UFP (pull-down to GND) mode."
},
{
"number": "5",
"name": "VBUS_DET",
"type": "input",
"description": "5 V to 28 V VBUS input for UFP attachment detection, requiring one external 900 kΩ resistor between system VBUS and this pin."
},
{
"number": "6",
"name": "TXp",
"type": "bidirectional",
"description": "Host/device USB SuperSpeed differential TX positive signal of the 2:1 mux."
},
{
"number": "7",
"name": "TXn",
"type": "bidirectional",
"description": "Host/device USB SuperSpeed differential TX negative signal of the 2:1 mux."
},
{
"number": "8",
"name": "VCC33",
"type": "power_in",
"description": "3.3 V power supply input for the device."
},
{
"number": "9",
"name": "RXp",
"type": "bidirectional",
"description": "Host/device USB SuperSpeed differential RX positive signal of the 2:1 mux."
},
{
"number": "10",
"name": "RXn",
"type": "bidirectional",
"description": "Host/device USB SuperSpeed differential RX negative signal of the 2:1 mux."
},
{
"number": "11",
"name": "DIR",
"type": "output",
"description": "Open-drain Type-C plug orientation output that requires a pull-up resistor of about 200 kΩ for proper operation."
},
{
"number": "12",
"name": "ENn_MUX",
"type": "input",
"description": "Active-low MUX enable where low selects normal operation and high selects shutdown."
},
{
"number": "13",
"name": "GND",
"type": "power_in",
"description": "Ground reference for the device."
},
{
"number": "14",
"name": "RX1n",
"type": "bidirectional",
"description": "Type-C port USB SuperSpeed differential RX1 negative signal."
},
{
"number": "15",
"name": "RX1p",
"type": "bidirectional",
"description": "Type-C port USB SuperSpeed differential RX1 positive signal."
},
{
"number": "16",
"name": "TX1n",
"type": "bidirectional",
"description": "Type-C port USB SuperSpeed differential TX1 negative signal."
},
{
"number": "17",
"name": "TX1p",
"type": "bidirectional",
"description": "Type-C port USB SuperSpeed differential TX1 positive signal."
},
{
"number": "18",
"name": "RX2n",
"type": "bidirectional",
"description": "Type-C port USB SuperSpeed differential RX2 negative signal."
},
{
"number": "19",
"name": "RX2p",
"type": "bidirectional",
"description": "Type-C port USB SuperSpeed differential RX2 positive signal."
},
{
"number": "20",
"name": "TX2n",
"type": "bidirectional",
"description": "Type-C port USB SuperSpeed differential TX2 negative signal."
},
{
"number": "21",
"name": "TX2p",
"type": "bidirectional",
"description": "Type-C port USB SuperSpeed differential TX2 positive signal."
},
{
"number": "22",
"name": "ADDR",
"type": "input",
"description": "Tri-level input selecting I2C address 0x67 when tied high to VDD5, GPIO mode when left unconnected, or I2C address 0x47 when tied low to GND."
},
{
"number": "23",
"name": "INT_N/OUT3",
"type": "output",
"description": "Dual-function open-drain output that is an active-low I2C interrupt (INT_N) in I2C mode and an audio accessory detect output (OUT3, low when detected) in GPIO mode; it is a no connect on HD3SS3220L."
},
{
"number": "24",
"name": "VCONN_FAULT_N",
"type": "output",
"description": "Open-drain output asserted low when a VCONN overcurrent condition is detected."
},
{
"number": "25",
"name": "SDA/OUT1",
"type": "bidirectional",
"description": "Dual-function pin that is the I2C data signal when I2C is enabled and an open-drain UFP current-mode output (high for default 900 mA, low for 1.5 A or 3 A) in GPIO mode."
},
{
"number": "26",
"name": "SCL/OUT2",
"type": "bidirectional",
"description": "Dual-function pin that is the I2C clock signal when I2C is enabled and an open-drain UFP current-mode output (high for default or 1.5 A, low for 3 A) in GPIO mode."
},
{
"number": "27",
"name": "ID",
"type": "output",
"description": "Open-drain output asserted low when a device attachment is detected on the CC pins while the port acts as a source (DFP) or as a DRP acting as DFP."
},
{
"number": "28",
"name": "GND",
"type": "power_in",
"description": "Ground reference for the device."
},
{
"number": "29",
"name": "ENn_CC",
"type": "input",
"description": "Active-low enable for the CC controller."
},
{
"number": "30",
"name": "VDD5",
"type": "power_in",
"description": "5 V power supply input for the device."
},
{
"number": "31",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The datasheet gives no numbered pin for the exposed thermal pad (listed only as 'Thermal Pad', which; The package hint 'WQFN-30-EP(2.5x4.5)' matches the orderable addendum entry 'WQFN (RNH) 30' for HD3S",
"exposed pad 31 added from the footprint"
],
"pages_sent": 11,
"cost_usd": 0.0514,
"at": "2026-11-17T00:05:05"
},
"datasheet": {
"url": "https://www.ti.com/lit/ds/symlink/hd3ss3220.pdf",
"pages": 48,
"sha256": "44ad645ff24f1bf2",
"source_tier": "mfr"
},
"cad": "Adom_Gen derived land; symbol and 3D generated",
"pins": {
"total": 31,
"described": 31,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "hd3ss3220irnhr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.52,
4.52,
0.8
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "ba8090fcb962d759cc800fa9daaa7732ef29e27e1de50a07318c6d5683caf72e",
"checked": "2026-11-17",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "hd3ss3220irnhr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.52,
4.52,
0.8
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "79914608ebfb2e511f84ec7b087c6ebcaadc2d5bf6c77b41dfa5086bd85b800a",
"checked": "2026-11-17",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}