GM7A4001

{
 "schema": "adom.pads/1",
 "slug": "gm7a4001",
 "footprint": "MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm",
 "generated_from": {
  "footprint": "MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm@sha256:e50b50ea9af4dc66",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -2.1125,
   -0.975
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm@sha256:e50b50ea9af4dc66"
 },
 "pad_count": 9,
 "symbol_pins": [
  "1",
  "2",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8",
  "9"
 ],
 "paste_apertures": 4,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.1125,
    -0.975
   ],
   "rot": 0.0,
   "size": [
    1.575,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "OUT",
   "type": "power_out",
   "description": "Regulated output voltage pin. Adjustable from 1.2V to 90V; requires an output capacitor greater than 2.2 μF for stability. Supplies up to 50 mA with internal short-circuit current limit (typ 120 mA).",
   "is_pin1": true,
   "source": {
    "geometry": "MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.1125,
    -0.325
   ],
   "rot": 0.0,
   "size": [
    1.575,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "FB",
   "type": "input",
   "description": "Feedback pin for the error amplifier. Connect to the tap of the external R1/R2 divider from OUT; regulation forces FB to the 0.8V internal reference (Vout = 0.8V × (R1+R2)/R2). Feedback pin current typ 0.01 μA.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.1125,
    0.325
   ],
   "rot": 0.0,
   "size": [
    1.575,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "NC",
   "type": "unconnected",
   "description": "No internal connection. Leave floating or tie to GND for best PCB layout.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.1125,
    0.975
   ],
   "rot": 0.0,
   "size": [
    1.575,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "GND",
   "type": "power_in",
   "description": "Device ground reference. Must be tied to the exposed thermal pad (EP), which shares the GND net and provides the primary thermal path to the PCB.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.1125,
    0.975
   ],
   "rot": 0.0,
   "size": [
    1.575,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "EN",
   "type": "input",
   "description": "Active-high enable input, CMOS-logic compatible. VENHI ≥ 1.0V enables the regulator; VENLO ≤ 0.4V places the device in shutdown (ISD typ 8 μA). Absolute-max 110V; may be tied to VIN for always-on operation (IEN typ 0.02 μA).",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.1125,
    0.325
   ],
   "rot": 0.0,
   "size": [
    1.575,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "NC",
   "type": "unconnected",
   "description": "No internal connection. Leave floating or tie to GND for best PCB layout.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.1125,
    -0.325
   ],
   "rot": 0.0,
   "size": [
    1.575,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "7",
   "name": "NC",
   "type": "unconnected",
   "description": "No internal connection. Leave floating or tie to GND for best PCB layout.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.1125,
    -0.975
   ],
   "rot": 0.0,
   "size": [
    1.575,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "8",
   "name": "IN",
   "type": "power_in",
   "description": "Input supply pin, +7V to +100V operating (abs-max +110V). Requires an input capacitor greater than 0.47 μF (typ 1 μF) placed close to the pin. Dropout is 2.8V at IOUT = 50 mA.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "9",
   "kind": "smd",
   "shape": "rect",
   "at": [
    0.0,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.5,
    1.8
   ],
   "layers": [],
   "thermal": true,
   "pin": "9",
   "name": "GND",
   "type": "power_in",
   "description": "Exposed thermal pad on the bottom of the package, electrically tied to GND. Solder to a copper ground pour on the PCB to conduct heat away from the die.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}