main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ft25c32a-usr-t: viewers · Ray
ft25c32a-usr-t-etched.glb Publish 0.1.0 · Ray
ft25c32a-usr-t-etched.step ft25c32a-usr-t: factory component page (tier=lcsc) · Ray
ft25c32a-usr-t-hero.glb ft25c32a-usr-t: hero GLB from the etched model (keeps the MPN mark) · Ray
ft25c32a-usr-t-hero.overlay.json Publish 0.1.0 · Ray
ft25c32a-usr-t.glb Publish 0.1.0 · Ray
ft25c32a-usr-t.kicad_mod Publish 0.1.0 · Ray
ft25c32a-usr-t.kicad_sym Publish 0.1.0 · Ray
ft25c32a-usr-t.lbr Publish 0.1.0 · Ray
ft25c32a-usr-t.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

FT25C32A-USR-T

FMD(Fremont Micro Devices) · EEPROM · SOP-8

FT25C32A-USR-T from FMD(Fremont Micro Devices), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS input Chip Select input: the device is selected when CS is low, and when it is not selected SI data is not accepted and SO stays high impedance.
2 SO tri_state Serial Data Output: data is shifted out after the falling edge of the serial clock during a read cycle, and the pin is high impedance when the device is not selected.
3 WP input Write Protect input: when WP is low and WPEN is high, writes to the non-volatile bits of the status register are disabled.
4 GND power_in Ground.
5 SI input Serial Data Input: receives instructions, addresses and data, which are latched on the rising edge of the serial clock.
6 SCL input Serial Clock input: synchronizes communication with the master, latching SI on the rising edge and updating SO after the falling edge, at up to 20MHz at 5V.
7 HOLD input Hold input: pulled low while SCK is low to pause serial communication without resetting the serial sequence, and brought high while SCK is low to resume.
8 VCC power_in Power supply, 1.8V to 5.5V.

Key specifications

Parameter Value
Manufacturer FMD(Fremont Micro Devices)
Package SOP-8
Category Memory
Pins 8

CAD (KiCad official)

  • Symbol: FT25C32A-USR-T
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: ft25c32a-usr-t-etched.step / ft25c32a-usr-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ft25c32a-usr-t.step / ft25c32a-usr-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: FMD(Fremont Micro Devices) datasheet (16 pp, sha256 0253025d419a7d2c, retrieved 2026-10-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF