component
FT25C32A-USR-T
Public Made by Adomby adom
FMD(Fremont Micro Devices) EEPROM, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
22de5f2
FT25C32A-USR-T
FMD(Fremont Micro Devices) · EEPROM · SOP-8
FT25C32A-USR-T from FMD(Fremont Micro Devices), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS | input | Chip Select input: the device is selected when CS is low, and when it is not selected SI data is not accepted and SO stays high impedance. |
| 2 | SO | tri_state | Serial Data Output: data is shifted out after the falling edge of the serial clock during a read cycle, and the pin is high impedance when the device is not selected. |
| 3 | WP | input | Write Protect input: when WP is low and WPEN is high, writes to the non-volatile bits of the status register are disabled. |
| 4 | GND | power_in | Ground. |
| 5 | SI | input | Serial Data Input: receives instructions, addresses and data, which are latched on the rising edge of the serial clock. |
| 6 | SCL | input | Serial Clock input: synchronizes communication with the master, latching SI on the rising edge and updating SO after the falling edge, at up to 20MHz at 5V. |
| 7 | HOLD | input | Hold input: pulled low while SCK is low to pause serial communication without resetting the serial sequence, and brought high while SCK is low to resume. |
| 8 | VCC | power_in | Power supply, 1.8V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | FMD(Fremont Micro Devices) |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
FT25C32A-USR-T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ft25c32a-usr-t-etched.step/ft25c32a-usr-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ft25c32a-usr-t.step/ft25c32a-usr-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: FMD(Fremont Micro Devices) datasheet (16 pp, sha256
0253025d419a7d2c, retrieved 2026-10-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# FT25C32A-USR-T
**FMD(Fremont Micro Devices)** · EEPROM · SOP-8
FT25C32A-USR-T from FMD(Fremont Micro Devices), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS | input | Chip Select input: the device is selected when CS is low, and when it is not selected SI data is not accepted and SO stays high impedance. |
| 2 | SO | tri_state | Serial Data Output: data is shifted out after the falling edge of the serial clock during a read cycle, and the pin is high impedance when the device is not selected. |
| 3 | WP | input | Write Protect input: when WP is low and WPEN is high, writes to the non-volatile bits of the status register are disabled. |
| 4 | GND | power_in | Ground. |
| 5 | SI | input | Serial Data Input: receives instructions, addresses and data, which are latched on the rising edge of the serial clock. |
| 6 | SCL | input | Serial Clock input: synchronizes communication with the master, latching SI on the rising edge and updating SO after the falling edge, at up to 20MHz at 5V. |
| 7 | HOLD | input | Hold input: pulled low while SCK is low to pause serial communication without resetting the serial sequence, and brought high while SCK is low to resume. |
| 8 | VCC | power_in | Power supply, 1.8V to 5.5V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | FMD(Fremont Micro Devices) |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `FT25C32A-USR-T`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `ft25c32a-usr-t-etched.step` / `ft25c32a-usr-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ft25c32a-usr-t.step` / `ft25c32a-usr-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [FMD(Fremont Micro Devices) datasheet](docs/ft25c32a-usr-t-datasheet.pdf) (16 pp, sha256 `0253025d419a7d2c`, retrieved 2026-10-26, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ft25c32a-usr-t-datasheet.pdf)