main
Ray Publish 0.1.0 22de5f2
{
  "slug": "ft25c32a-usr-t",
  "version": "0.1.0",
  "type": "component",
  "description": "FMD(Fremont Micro Devices) EEPROM, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "ft25c32a-usr-t",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ft25c32a-usr-t.kicad_sym",
    "ft25c32a-usr-t.kicad_mod",
    "ft25c32a-usr-t.glb",
    "ft25c32a-usr-t.step",
    "ft25c32a-usr-t.lbr",
    "docs/hero.png",
    "docs/ft25c32a-usr-t-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ft25c32a-usr-t-hero.glb",
    "ft25c32a-usr-t-hero.overlay.json",
    "ft25c32a-usr-t-etched.glb"
  ],
  "component": {
    "mpn": "FT25C32A-USR-T",
    "manufacturer": "FMD(Fremont Micro Devices)",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Memory",
    "subcategory": "EEPROM",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/843464024d94f2bcc4a4ccbe008b34a9.pdf",
    "parts": {
      "symbol": "ft25c32a-usr-t.kicad_sym",
      "footprint": "ft25c32a-usr-t.kicad_mod",
      "model_3d": "ft25c32a-usr-t-hero.glb",
      "model_3d_plain": "ft25c32a-usr-t-etched.glb",
      "model_3d_step": "ft25c32a-usr-t-etched.step",
      "model_3d_step_plain": "ft25c32a-usr-t.step",
      "lbr": "ft25c32a-usr-t.lbr"
    },
    "distributor_links": {
      "lcsc": "C7466813",
      "digikey": "1219-1188-2-ND"
    },
    "distributor_check": {
      "checked_at": "2026-10-26T23:49:52Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "1219-1188-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CS",
        "type": "input",
        "description": "Chip Select input: the device is selected when CS is low, and when it is not selected SI data is not accepted and SO stays high impedance."
      },
      {
        "number": "2",
        "name": "SO",
        "type": "tri_state",
        "description": "Serial Data Output: data is shifted out after the falling edge of the serial clock during a read cycle, and the pin is high impedance when the device is not selected."
      },
      {
        "number": "3",
        "name": "WP",
        "type": "input",
        "description": "Write Protect input: when WP is low and WPEN is high, writes to the non-volatile bits of the status register are disabled."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "5",
        "name": "SI",
        "type": "input",
        "description": "Serial Data Input: receives instructions, addresses and data, which are latched on the rising edge of the serial clock."
      },
      {
        "number": "6",
        "name": "SCL",
        "type": "input",
        "description": "Serial Clock input: synchronizes communication with the master, latching SI on the rising edge and updating SO after the falling edge, at up to 20MHz at 5V."
      },
      {
        "number": "7",
        "name": "HOLD",
        "type": "input",
        "description": "Hold input: pulled low while SCK is low to pause serial communication without resetting the serial sequence, and brought high while SCK is low to resume."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply, 1.8V to 5.5V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text+vision",
        "consensus_model": "claude-opus-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 5 and 6 names: the pin table and figure label the serial clock pin SCL, while the block diagram ; The pin-to-number assignment comes from Figure 1 (page 2), which is shared by the DIP, SOP and TSSOP; The datasheet gives no explicit pin type classification, so types are inferred from the described fu",
          "vision extraction: provenance cannot be text-verified; needs consensus"
        ],
        "pages_sent": 16,
        "cost_usd": 0.0497,
        "at": "2026-10-26T23:49:37"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/843464024d94f2bcc4a4ccbe008b34a9.pdf",
        "pages": 16,
        "sha256": "0253025d419a7d2c",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ft25c32a-usr-t.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-26",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ft25c32a-usr-t-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d7705cc8a2bba0dc646c3a6dadab0f059f895ed18aef83dce57fa62915933259",
        "checked": "2026-10-26",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}